Construction of 33 KV Line

Amount

Particulars

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘V’ Type Cross Arm 100x50x6mm, MS Channel (7.9 Kg/m)

33 KV Polymer Pin Insulator

Number Plate

Danger Board with Clamp

Barbed wire

Bolts, Nuts, & Washers

Top channel clamp with nut bolt for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make

Top channel clamp with nut bolt for PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

X-arm clamp with nut bolt for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make

X-arm clamp with nut bolt for PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

clamp for ST Pole 11mtr as stud pole with nut bolt by 50x8 mm MS flat Iron make

Stay Clamp for ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay Clamp for PCC Pole 9 mtr with Nut and Bolt by 50x8 mm MS Flat Iron make.

stay Rod 20x1800 mm

stay wire 7/8 SWG

MS Earthing Rod 20x2500 mm

33 KV Polymer Disc Insulator 70 KN B&S Type

Disc fitting 70 KN B&S Type for DOG

P.G. Clamp for DOG

‘E’ Bracket for 33 KV

M.S. Angle Iron 65x65x6mm bracing

33 KV M.S. bracing Angle clamp with nut bolt (Top side) for PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

33 KV M.S. bracing Angle clamp with nut bolt (Bottom side) for PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

33 KV M.S. bracing Angle clamp with nut bolt (Top side) for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make

33 KV M.S. bracing Angle clamp with nut bolt (Bottom side) for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make

33 KV. Top channel (125x65mmX3200 mm (10.7 Kg/m)

33 KV Guarding angle

GI Wire 5 mm

33 KV Guarding angle Clamp with nut bolt for ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.

33 KV Guarding angle Clamp with nut bolt for 9 mtr Pcc Pole with Nut and Bolt by 50x8 mm MS Flat Iron make.

F-bracket with nut bolt for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make

F-bracket with nut bolt for PCC Pole 9 mtr with nut bolt by 50x8 mm MS flat Iron make

Special GI Pipe for cable earthing

PART - B- WORK

Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

PCC Pole 9 M Long

ST Pole 11 M Long

3x300 Sq mm XLPE Cable 33 KV

ACSR Dog Conductor

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) of Double cable by digging pit & making trench in Proper size (1.2M depth x1.2M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks. As per Site requirement HDD method can be used

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) of Double cable under the railway crossing by digging pit & making trench in Proper size (1.2M depth x1.2M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks. As per Site requirement HDD method can be used

Rising of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Special GI Pipe Earthing Complete for 33 KV ‘XLPE’ C/J Kit.

Erection of Single pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories ( 'V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Single pole as stud pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for Single circuit (clamps with bolt and nut, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Tri pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 11 mtr ST Pole for one side O/H and one side U/G line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . (For railway crossing)

Erection of Double pole structure on 11 mtr ST Pole for only Cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . (For railway crossing)

Erection of Single pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for double circuit (‘V' type cross arm 100 x 50 x 6 mm, clamps with bolt and nut, composite polymer pin insulator, danger board with clamp, barbed wire earthing, etc. complete).

Erection of Double pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).

Erection of Tri pole structure on 9 Mtr PCC Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, barbed wire earthing, etc. complete).

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

Laying, spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with profile and sag chart including binding, Jumpering and fixing of P.G. Clamp as per requirement in 03 Nos. conductor in parallel.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Chopping of branches of trees of eucalyptus, Neem, Keekar and other kind of trees along the route of the line and disposal of the same at suitable place.

Guarding between two poles like single poles, double poles, four poles, etc. to guard LT, 11 KV Line telephone and river crossing, road crossing etc. with G.I. wire no. 6 SWG and G.I. wire no. 8 SWG, cutting, fabrication and fixing of guarding channel 75 x 40 x 3010 mm with clamps nut & bolts etc. as per drawing.

Extra cost for Stay at right angle (provided by contractor as per site requirement)

V.K. TRADERS

M/s Anil kumar singh

INDIA SUPPY CORPORATION