REPAIR TO CERTAIN BLACK TOP ROAD, CULVERTS, RETAINING WALL ETC AT RMS DHOLPUR

M & L Preparing existing black top surface by brushing with wire brushers for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove complete all as specified.

M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen @ 05 kg per 10 Sqm complete all as specified.

Providing and laying bituminous concrete with 30 mm thick of 100-120 TPH batch type hot mix plant producing an avarage output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.5 percent of mix and filler cement @ 2% by weight of total mix, transporting the hot mix to work site laying with a mechanical paver finisher to the required grade level and tandem rollers to achieve the desired compactions including priming tack coat of paving bitumen (VG-10) @ 5.0 Kg per 10 sqm after preparation of surface, complete all as specified. Notes :- (i) Filler for bituminous concrete shall be cement @ 2% of total mix. (ii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ ₹ 53.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said items. (iii) Work shall be executed as per design mix approved by GE.

M & L for premix bituminous macadam with binder content 4 % of bitumen (Paving bitumen VG-30 graded) by the weight of total mix laid, rolled and compacted to required gradient and camber (Consolidated thickness 75mm or less) with 8 to 12 tonne power road roller complete all as specified.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified. Make: Dark EYE/3M/TATA

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc complete all as specified. Make: 3M or equivalent in Dark Eye/Tata

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified.

Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries complete all as specified.

M & L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in Sub floor, Sub -Base, floors and pavings complete all as specified.