CA NO GE S U 18 2023 24 PROVN OF TILING PLASTERING PAINTING ALLIED WORK IN BLDG NO NP 48 50 PROVN OF BRICK WALL PLATFORM PATHWAY AND ALLIED WORK IN PACHAURI PARK PROVN OF SEWAGE LINE AND CONNECTED WORK NEAR OR LINE AND PROVN OF LED FITTI

Amount

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below and above ground level complete all as specified and as directed.

Demolition of reinforced cement concrete as in roof slabs (other than ground floors) beams staircases, landing chajjas, drop facia and similar suspended work complete all as specified and as directed.

Fromwork to soffits of suspended slabs such as roof slabs, landing and similar work not exc 200mm thick complete all as specified and as directed.

Reinforced cement concrete M-25 nominal mix as in slab supported on walls , beam, and columns in floors,roofs landings , balconies etc complete all as specified and as directed.

Mild Steel TMT steel bars 10mm dia and over cut to length bent to shape reqd including cranking bending spirally for hooping for columns hooking ends and binding with M.S wire annealed not less than 0.9mm dia complete all as specified and as directed. (Note : Site for brick work may involve head load , contractor shall have no claim on extra labour incurred in this account)

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description complete all as specified and as directed.

Brick work with sub class "B" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:4 complete all as specified and as directed.

Rendering 15 mm thick in CM 1:6 on brick work and finished even and smooth without using extra cement complete all as specified and as directed.

15 mm thick rendering in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed.(WPC shall be measured separtely)

Preparation of New plaster surface of walls surface and applying two coat of plastic emulsion paint (Shade approved by GE) over two coat of wall care putty with primer complete all as specified and as directed.

Preparation of new plaster surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) over a two coat of wall care putty with a coat of primer etc complete all as specified and as directed.

75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base of floor etc complete all as specified and as directed.

15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and as directed.

Marble tile 20 mm thick machine cut, marble slab, (makrana black /green ), as in flooring, bedded jointed with grey cement slurry and pointed with white cement including cutting and polishing complete all as specified and as directed.

Cement concrete 1:3:6 type C-2, 75 mm thick using 20mm graded crushed stone aggregates as in plinth protection finished fair and even with using extra cement complete all as specified and as directed.

6.4 mm thick bevelled edge glass of area n exc 0.5 Sqm each as in shelves of size and shape as required at site complete all as specified and as directed.

Ultra Charged/double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Ultra Charged/double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm , in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F harrison , rails drapery rod powdered coated including brackets and necessary fitting complete all as specified and as directed.

Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300x600x7mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile etc, complete all as specified and as directed.

Water closet wall mounted pattern pattern colour (as approved by GE) Make Cat Part No (EWC 120305) cistern 120714 Seat cover 121311 Twin flush cistern 120627) UNIEK complete all as specified and as directed.

WHB coloured 615mmx510mm with pedestal Cat Part No (WHB 1009, PEDESTAL 1108) complete all as specified and as directed.

CP waste coupling 32mm dia PTMT (half or full threaded) minimum wt 450 gms complete all as specified and as directed.

PVC waste pipe 32mm bore with cup and washers complete all as specified and as directed.

15mm bore centre hole basin mixer with round spout with 450mm long copper pipes and brass nuts with out Pop up complete all as specified and as directed.

15mm bore Bib tap of Cat Part No CON-107KN complete all as specified and as directed.

15mm bore angular stop cock with wall flange complete all as specified and as directed.

PVC connection 15mm bore 450 mm long Braided Hose with M10X1 Nipple, 15 mm Nut, O-Ring & Rubber washer (Suitable for Basin Mixers) complete all as specified and as directed.

PVC connection 15mm bore 450 mm long Braided Hose with two 15 mm Nut, & Rubber washer without nipple complete all as specified and as directed.

Chromium plated toilet paper holder complete all as specified and as directed.

Glass shelf with chromium plated guard rails complete all as specified and as directed.

600 mm long brass chromium plated towel rail fancey type complete all as specified and as directed.

Soap dish complete all as specified and as directed.

Double Coat hook complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation complete all as specified and as directed.

Brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

Hardcore of broken stone or boulders of gauge exc. 63mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed.

Wall cladding tiles n exc 1.0 Sqm stone series on exterior wall surface design and size as approved by GE as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Vitrified Dura stone tiles of size n exc 0.36 Sqm of 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and as directed.

18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces & finishing the surface even & smooth without using extra cement complete all as specified and as directed.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe .290.Gde-E-165 complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Applying two coats of synthetic enamel ordinary tint paint including red oxide primer and preparation extra complete on new steel or iron surfaces of any description, over 10cm in width or grith, not otherwise described complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

100 mm thick PCC type B2 (1:2:4) using 40mm graded crushed aggregate as flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Salt glazed stone ware drain pipe 150mm bore in trenches and jointed complete all as specified and as directed.

Salt glazed stone ware drain pipe200mm bore in trenches and jointed as spfd complete all as specified and as directed.

Cement Concrete 1:4:8 type C2 using 40mm graded crushed stone aggregate as in bed to 150mm drain pies including packing under and haunching against the sides pipes after they are laid and tested for complete all as specified and as directed.

Concrete 1:4:8 type C2 using 40mm graded crushed stone aggregateas in bed to 200mm drain pies incl packing under and haunching against the sides pipesafter they are laid and tested for complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and as directed.

Walling of random rubble masonary , rectangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

Flush pointing to Square rubble masonry coursed or uncoursed in CM (1:3) complete all as specified and as directed.

PCC 1:2:4 type B1 using 20 mm graded cushed stone aggregate as in coping ,benching and the like including form work complete all as specified and as directed.

RCC 1:2:4 M-25 using 20mm graded crushed stone aggregates for precast cement concrete slabs as in manhole covers etc set in cement mortar 1:4 complete all as specified and as directed.

Form work to soffits of suspended slabs and similar work not exceeding 200mm thick complete all as specified and as directed.

Cutting in to existing manholes for forming new drains and making good to pipe and making good to pipe and rendering ,cutting out existing benching in cement concrete 1:2:4 type B1(in 1/2 or 3/4 round in section) and reforming benching as required for 150mm bore pipe complete all as specified and as directed.

75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded crushed stone aggregates) as in sub base complete all as specified and as directed.

Plain cement concrete 1:2:4 type B1( using 20mm graded stone aggregate) 100mm thick as in floor, complete all as specified and as directed.

Chequered cement concrete (glossy finish)tile 300 mm x 300 mm x 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1:6 complete all as specified and as directed.

Sand cushioning 20 to 30mm thick for fixing of inter locking tiles complete all as specified and as directed.

Machine pressed precast concrete interlocking paver block (glossy finish)of approved shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design by GE complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as directed.Keeping the LED lights in safe custody complete all as specified and as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and as directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and as directed.

Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all as specified and as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No 76 above but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per srl item No 76 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 76 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

S&F modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and as directed.

S&F modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and as directed.

S&F modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and as directed.

S&F modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and as directed.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

Single pole and neutral enclosure surface mounted 240 voltswith 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 22W, 230V,AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F in replacement 36W (2 x 2) LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and as directed.

Supply and fixing LED luminaire 15 watt, 220 V AC recess mounted down lighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED luminaire 12 watt, 220 V AC recess mounted down lighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED luminaire 6 watt, 220 V AC recess mounted down lighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Sheet metal enclosure double door type for MCCB TPN DB upto 125 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed.

S & F in replacement MCCB Three Pole & Neutral capacity of 125 Amps 415 volts rupturing capacity 16 KA complete all as specified and as directed.

S&F Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately)

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA inculding providing thimble for out going cable complete all as specified and as directed.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and as directed.

All as per Srl item No 76 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 76 but for 3 pin 5 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 76 but for 3 Pin 15 Amps socket outlet independent with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 76 but for 3 Pin 15 Amps socket outlet independent with cable 4.0 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

S&F switch Piano flush type 6 Amps single pole one way (Modular Type) with outer strip complete all as specified and as directed.

S&F switch Piano flush type 16 Amps single pole one way (Modular Type) with outer strip complete all as specified and as directed.

S&F socket 3 Pin 6 Amps flush type complete all as specified and as directed.

S&F for socket combined 2-in-1, 3 Pin 6 & 16 Amps flush type (Modular Type) with outer strip complete all as specified and as directed.

S & F electronic step type fan regulator 120 watt 230 volts 50 C/S deluxe modular type complete all as specified and as directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

S&F Street light Bracket complete made of GI pipe of suitable size, medium grade 25 mm 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall, complete all as specified and as directed.

Sheet metal enclosure MCB distribution board Triple pole & neutral 415 volts 4 way C Curve with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed.

Supply and fixing ceiling fan, AC single Phase. 230V of size 1200mm sweep with, blades, and frame along with all electrical wire connection and including taking down old ceiling fan and deposited to MES Store complete all as specified and as directed.

Supply & Fixing MCB TPN 100 Amp, 4 Pole, 415V 'C' Curve complete all as specified and as directed.

S&F in replacement MCB Single Pole, 230 Volt, Rating 10 to 40 Amps, C Curve complete all as specified and as directed.

S&F in replacement MCB Single Pole and Neutral , 230 Volt, Rating 63 Amps, C Curve. complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electode 600mm x 600mm x 6.00mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-1 angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mash and light grade GI protection pipe 15mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board complete all as specified and as directed.

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size complete all as specified and as directed. Note : Earth work and other connected work shall be measured & paid sperately.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and as directed. Note : for payment purpose punned thickness shall be measured

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cable to give mechanical protection to underground cables complete all as specified and as directed.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and as directed.

VISHWANATH AND SONS

RAMAN CONSTRUCTION CO

VIRINDER SINGH

M/S SATINDER PAL & CO.

SINGH CONST CO

VARDHMAN INTERNATIONAL

s l sharma and sons

paras ram pachiala