CERTAIN REPAIRS TO JOINERY, PLASTERING, TILING WORK AND SANITARY WORKS AT SLI OTM ACCN UNDER AGE (I) FATEHGARH CANTT

Amount

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, complete all as specified.

Taking down shutter of any description exc 1 Sqm and n. exc 2.0 sqm each complete all as specified.

Taking down door shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same after easing and adjusting/resizing all as directed.

S & F rolled section as in framing or cladding, glazing, for door chawkat frame and the like fixed with angle cleats and connecting plates, etc conforming to Fe-410-W (Gde-E-250) quality - A etc complete all as specified and directed.

S & F Mild steel framed work such as grills, gratings etc with ends of bars, houldered and /or riveted, or forged into spikes; framed guard bars, barred iron doors; ladders, framed balusters, walkways, railings, framework of water tanks and similar work conforming to Fe 290 Gde-E-165 etc complete all as specified and directed.

S& F factory made 35mm thick, 2nd class hardwood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc complete all as specified and directed.

S&F Factory made, 35mm thick, 2nd class harswood Glazed and skeleton shutters (single/Double leaf), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. complete all as specified.

M & L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall bw covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for tip rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing & complete all as specified

S & F for Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing, complete all as specified

S & F in repair for block boards, 18/19mm thick grade 2 quality, interior grade, decorative type with decorative face veneer on one face as in shelves of cupboards, alongwith beading of 2nd class hardwood of size 19mm x 2mm, fixed with screws to timber frame work, complete all as specified.

M&L in repair for 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in shutters of cupboards, fixed with screws in repairs, complete all as specified.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed.

S & F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded etc complete all as specified and directed.

S&F steel ventilators with top hung shutter incl hinges steel peg stay, complete including taking down complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples,complete all as specified.

S&F Mild steel sliding door bolts 250mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified.

S&F Aluminium handle 125 mm long cast type anodised, complete all as specified.

S&F Aluminium tower bolt 150 mm long, anodised barrel tower bolts of extruded section complete all as specified.

S&F Mild steel pressed handles 125mm size, oval type, stove enamelled black, complete all as specified.

S&F Mild steel barrel tower bolts 150mm, stove enamelled black,with barrel of extruded section and fixed in doors/windows complete all as specified.

S&F Aluminium floor door stopper (150 mm long) of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified

S&F M.S.helical door spring (150 mm long) including roller and roller plate complete all as specified

S&F Butt hinges 100 mm medium weight cold rolled Mild Steel complete all as specified

S&F Sheet glass, ordinary quality 3.00 mm thick not exceeding 0.5 sq m in each pane (in single/double /triple storey bldgs), in steel/wooden window with cleat/oil putty as per site requirement complete all as specified.

S&F in repair Sheet glass, ordinary quality 3.00 mm thick not exceeding 0.5 sq m in each pane (in single/double /triple storey bldgs), in steel/wooden window with cleat/oil putty as per site requirement complete all as specified.

S & F for Hasp and staple, 100mm size, safety type, aluminium anodised including bolt to hinge plate and fixed with screws, complete all as specified.

S & F in repair for Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified.

Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars etc all as spd. complete all as specified.

M&L of brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 complete all as spd, complete all as specified

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M & L for Rendering 15mm thick cement plaster in cement mortar 1:4 on on fair faces of brick work or concrete and mix with water proofing compound and finished even and smooth (without using extra cement) complete all as specified.(WPC shall be measured & paid separetaly)

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement, complete all as specified.

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified

M&L for preparation of new or previously untreated surface of wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint etc all all as specified.

M&L for two coats of cement based paints incl preparation to newly plastered surfaces of walls etc completed all as spd

M&L incl preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting etc completed all as spd

Supply only liquid water proofing compound.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

M & L for 6mm thick Non asbestos fibre cement building boards both side laminated fixed to frame work in ceiling flat or sloping, to GI snap grid frame work Size of grid 605 x 605mm for false ceiling including Hangers 2 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of rowl plug of suitable size all as specified all as specified

S & F coloured hollow PVC Wall Lining 6 to 8 mm thick including fixing on wall and providing PVC beading/L Section all around of lining complete all as per specifications and drawing

Dismantling floor, hearth or wall tiling of any description, any position including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for Glazed ceramic tiles in vertical surface 300 x 450x 7mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/GE, incl rubbish off the primises etc all as specified and directed.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over Screed bed or bedding layer in CM 1:4 of 15 mm thick for laying floor finishes etc complete all as specified and directed.

S & F in repair CP brass jet spray with flexible pipe 1.50m long fixed for EWC suitable for 15mm bore of pipe etc complete all as specified and directed.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed.

S & F in repair 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified.

S & F in repair Stop cock concealed long shank chromium plated fancy type 15 mm bore screwed down high pressure with crutch or butter fly handle complete all as specified and directed.

S & F in repair Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified.

Taking down aluminium shutter with frame any size and refixing in same opening after repair the all rails, styles, rubber beading, handle, lock, butt hinges etc complete all as specified and directed. The shutter frame shall be tied at top (internally) with screw of round bar 10mm dia

Taking down alunimum door/window incl all fittings exc 1 Sqm and n. exc 2.0 sqm, complete all as specified

S & F Anodised aluminium frame (powder coated of min thickness of 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S & F for Anodised aluminium (powder coated) door shutters, aluminium section including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each leaf, stainless steel hinges - 04 Nos on each leaf, anodised aluminum snap beading screws etc. complete all as specified.

S & F for Anodised aluminium (powder coated) window and ventilator shutters, fixed type without sash bar, aluminium section including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, stainless steel butt hinges-03 nos on each leaf and 02 Nos handles on each leaf etc. complete all as specified

S & F for aluminium anodised 75 x 75mm size diamond pattern 4mm thick grill including F/H section frame fixed with cadmium plated screw to window complete all as specified and directed.

M&L for 4.8 to 5.5mm thick glass ordinary quality, glazing or black with aluminum beeding and gasket to aluminum framework in square exc 0.50 sqm in each pane in repair complete all as specified.

Demolition of existing sunken treatment upto height of 90 cm including plaster and M&L for water proofing treatment on existing sunken floor/wall with and including the following specification complete all as specified and directed :- (a) 50mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) and laying in slope towards spout pipe. (b) 15mm thick (average) plaster in CM 1:3 on sunken floors and walls using WPC as per manufacturer instruction (c) Apply one coat bituminous primer @ 0.5 Kg/ Sqm on walls and floor conforming to IS 3384-1965 on prepared surface till the surface is properly impregnated (d) Apply hot air blown bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (e) APP polymeric water proofing memberance weight not less than 3.0 Kgs/Sqm laid as per manufacturer instructions confirming to IS (f) One spout of 40mm GI pipe length 0.45 M in sunken floor (g) Filling of sunken floor with PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) upto height required as per site requirement. (h) S&F of trap as per site requirement

Taking up or down Steel Tubing bore of pipe in 15mm and connections, and removal to store etc complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 20mm and connections, and removal to store etc complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 20mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

Supply and fixing in repairs vitreous China squatting pan of pattern(Orrissa pattern) size 580mm x 440 mm white with PVC P Trap of 110/125mm bore as suitable at site, front or back inlet and foot rests any pattern to flushing pipe and anti syphonage pipe and making good floor including lime concrete).etc complete all as specified and directed.

S & F in repair for Vitreous China, semi-pedestal pattern (Anglo-Indian Type) coloured including 'P' or 'S' trap with flush pipe of chromium plated brass 32 mm dia for low level flushing cistern incl plastic seat cover white closed pattern with float bottom and cover and jet connection and mild steel chrominum plate or aluminized hanging device fixed in repairs complete all as specified and directed.

S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed.

S&F in repair Low Level Flushing Cistern PVC valveless syphonic action type, 10 ltrs capacity white, with inlet pipe connection, ball float and handle including brackets and flush pipes to squatt pattern closet including all joints and making good to the floor etc complete all as specified and directed. complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F in repair Rotational moulded polyethylenewater storagetanks (cylindrical vertical with closed top) 1000 Ltr capacity, hoistedand fixed in position, including 20 mm dia PTMT Float valve complete all as specified. all as specified in SSR Part I

S & F in repair Rotational moulded polyethylenewater storagetanks (cylindrical vertical with closed top) 500 Ltr capacity, hoistedand fixed in position, including 20 mm dia PTMT Float valve complete all as specified. all as specified in SSR Part I

Shree Gopal Engineers & Contractor

M/S SRI JAGDAMBE TRADERS