Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹33 L
EMD Value
₹66,000
Closing Date
30 Nov 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE 866 EWS
GE 866 EWS CARNICOBAR PIN-913866 C/O 99APO
PROVISION OF MAIN LT CABLE FOR 500 KVA DG SET AT NEW CAPTIVE POWER HOUSE AT AF STN CAR NICOBAR AND CONSTRUCTION OF PARKING SHEDS FOR AIRCRAFT SPECIALIST VEHICLES (ASVS) AT 122 HF AND PROVISION OF IMPROVEMENT OF 19 SQN CAFETERIA AT AF STN CAR NICOBAR
2026_MES_798009_1
8875/E8
Open Tender
Civil Works
Item Rate
270 days
GE 866 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
GE 866 EWS
₹66,000
Yes
9 Nov 2026
9 Nov 2026
7 Dec 2026
9 Nov 2026
30 Nov 2026
23 Nov 2026
9 Nov 2026 - 16 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and mixed with earth around, inlayers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface in Hard rock or concreet surfaces including necessary core cutting into surfaces (or similar holes) complete all as specified and as directed. | 8 | Each | - | - |
| 2 | Material and Labour plain cement concrete 1:2:4 type B2 using 40mm graded granite stone aggrgate as on foundations filling and mass concrete, and finishing cement concrete surface even and smooth Without using extra cement, complete all as specified and as directed. | 8 | Cubic Metre | - | - |
| 3 | Supply and fix Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E-250) quality-B as in bracing members etc complete including necessary cutting , welding in any shape and in any position / direction in hangar doors etc complete all as specfified and as directed by the Engineer-in-Charge. | 915 | Kilogram | - | - |
| 4 | S&F steel work in tubular truss, purlins & columns including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 of grade St-240 complete all as specified and as directed. | 1,100 | Kilogram | - | - |
| 5 | Supply and fix mild steel plate (plain or chequerred), channel, square cut or notched(ordinary or counter sunk) forming holes with riveted, bolted or welded attachment to bottom of pipe conforming to Fe 410-W quality A(Gde-E-250) complete all as specified and directed. | 170 | Kilogram | - | - |
| 6 | M&L for MS work as in Wind Tie in roof and MS structural works in trusses, etc with screwed ends including nuts, washers and mild steel plates for walls chimneys, roofs arches etc any kind rods and straining bolts conforming to Fe 410-0 or Fe 310-0 complete all as specified . | 250 | Kilogram | - | - |
| 7 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering /cladding to wall, fixed with self tapping screws including providing of rubber washer/Bitumen washer with filling of Bitumen between joint of sheet and Self tapping screws complete all as specified. | 165 | Square Metre | - | - |
| 8 | S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering in roof covering /cladding to wall, fixed with self tapping screws including providing of rubber washer/Bitumen washer with filling of Bitumen between joint of sheet and Self tapping screws complete all as specified. | 12 | Square Metre | - | - |
| 9 | Supply and fix mild steel bolts purpose made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm and not exceeding 10 cm of shank 16 to 20mm etc complete all as specified and as directed. | 120 | Kilogram | - | - |
| 10 | Material and labour for preparation of new or previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed. | 120 | Square Metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
8875Tenderdocument.pdf
Tender Documents • 1.09 MB
BOQ_895210.xls
BOQ • 0.30 MB
8875Testing.pdf
Additional Documents • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .