Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-AOC H NO 114 A 10 GHAZI NAGAR RADDI CHOWKI GOHALPUR JABALPUR MP | L1 | Accepted-AOC AOC | |
| 2 | L2₹16.5 L+₹66,619.20 (4.20%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bidder | |
| 3 | L3₹16.7 L+₹85,559.20 (5.40%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest bidder | |
| 4 | L4₹17.5 L+₹1.7 L (10.7%)Rejected-Finance WARD NO 36 CHAUBEY COLONY NARSINGHGARHPURWA CHHATARPUR MADHYA PRADESH 471001 | CHHATARPUR | MADHYA PRADESH | 471001 | L4 | Rejected-Finance 4th lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
GE SAUGOR
REPAIR, MAINT OF CERTAIN BR WORKS IN MD ACCN OF HAWK HILL IN AGE BR-II AREA UNDER GE SAUGOR
2023_MES_592678_1
GE/SGR/TOK-12 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Saugor
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GARRISON ENGINEER SAGAR
₹40,000
Yes
30 Jun 2023
3 May 2023
3 Jun 2023
3 May 2023
1 Jun 2023
20 May 2023
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
Demolition of RCC in precast cover slab any thickness (reinforced) complete all as specified and directed
Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal serviceable tiles to store and rubbish off the premises complete all as specified and directed
Demolition of stone sett paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed
Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) n exc 1.5 sqm each etc and making the surface good with cement plastering on jambs and cills of openings in CM 1:6 complete all as specified and directed
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but not.exc 4 Sqm and making the surface good with cement plastering on jambs and cills of openings in CM 1:6 each complete all as specified and directed
Taking down shutters of any description exc 1sqm but not exc 2sqm each and making the surface good with cement plastering on jambs and cills of openings in CM (1:6) complete all as specified and directed.
M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all quoins arches, pillars, etc., built in cement mortar complete all as specified and directed.
M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortar 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.
M&L for Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
M&L for precast reinforced cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregates) set in CM(1:4) in landings,kitchen platform, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed .
M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as floors set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
S&F coloured anti skid ceramic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and noty exc. 0.18 sqm (400mm x 400mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match to match colour of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
M&L for glazed ceramic tiles of size 450mmx 300mmx 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match colour of tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .
M&L for 600mm x 600mm x 8mm to 10mm thick coloured vitrified tiles as in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed
All as per Srl item No. 17 above but in dado / skirting laid. over and including 10 mm thick rendering in CM (1:4) -ditto-.
M&L for 16mm to 18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed
M&L for ounding/ chamferring to edges of stone slabs one edge , such as in steps , cooking platform and other similar situations complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block glossy finished chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment over and including 30 to 50mm stone dust cushioning complete all as specified and directed
M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound complete all as specified and directed
M&L for 25 mm thick PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed
M&L for plain cement concrete type D-2, 1:3:6 (using 20 mm graded stone aggregate) as in sub base complete all as specified and directed
M&L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete all as specified and directed
M&L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonry / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Providing cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles, throating and including all necessary form work complete all as specified and directed
M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed
S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1.2.4, type B-1 (using 20 mm graded stone aggregates) and M&L PCC 1:3:6 type C-0 (using 12.5 mm graded store aggregate) for filling in pressed steel frame complete all as specified and as directed
All as per Srl item No 30 above but size 125mm x60mm ditto-
S&F steel window with side hung shutters with glazing bars devotailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc including cutting holes and making good in PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) and M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and directed.
S&F steel window with side hung shutters without glazing bars and fixed to steel frame complete all as specified and directed
S&F fixed type ventilators aluminium powder coated of frame size 50.80mmX 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,side and top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed (with double or single shutter)
S&F 35mm thick second class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed.
M&L for second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.
S&F in repair 18mm/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in kitchen cabinet boxes, shelves complete all as specified and directed
M&L for extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick, fixed with nails for 18/19mm thick prelaminated boards complete all as specified and directed.
S&F continuous (piano hinges, mild steel, bright finish or electro galvanised width of flaps (when opened) 40mm complete all as specified and directed
S&F Aluminium handles 100mm size, cast type, anodised complete all as specified and directed
S&F 100 mm hasp and staple, safety type, aluminium anodised, with mild steel hinge pin including bolt and hinge plate and fixed with screws complete all as specified and directed
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm prelam PVC sheet on back face complete all as specified and directed
S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.
S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed.
S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, Length of bolt 300 mm . complete all as specified and directed.
S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed
S & F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws complete all as specified and directed
S&F 300mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F framed work such as grills gratings, sun shed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framed work or water tanks and similar work conforming to Fe 290, Gde E 165 complete all as specified and directed.
Hacking out old broken glass (any thickness, size,quality or description) from wooden / steel frames glazed with oil putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.
S&F in repairs 110mm dia PVC(SWR) pipes single socketed in any length with rubber ring jointed fixed to wall or in trenches with and including suitable size mild steel clamps complete all as specified.
S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed
S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .
S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed
S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or fixed to walls complete all as specified and directed.
S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed
S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed
S&F in repairs 25 mm dia aluminium powder coated droppery rod including brackets complete all as specified and directed
S&F GI tubing 15 mm bore medium grade with all GI fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed
S&F GI tubing 20 mm bore medium grade with all GI fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections complete all as specified and directed
S&F in repair PVC float valve assembly including accessories with float valve 20mm dia complete all as specified and directed.
S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed.
S&F in repair chromium plated bib taps, cast copper alloy fancy concealed type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.
S&F in repair angular stop valve , 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup screwed down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed
S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.
S&F in repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, fixed in repairs complete all as specified & directed.
S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair complete all as specified and directed
S&F in repair vitreous china WHB white flat back size 550mmx400mm including S&F angle iron brackets, C.P pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.
S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580mmx440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including P or S trap complete all as specified and directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.
S&F in repairs toilet paper holder, vitreous China white, box type to walls with CP (CP) brass screws complete all as specified and directed
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction, hoisted & fixed in position of 1000 ltrs capacity including dismantling water tanks complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction, hoisted & fixed in position of 500 ltrs capacity including dismantling water tanks complete all as specified and directed.
Taking down of old roof treatment of any description including mud puska, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height complete all as specified and directed.
M&L for PCC 1:2:4, type B-0 (using 12.5mm graded stone aggregates) on roof top as a levelling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement complete all as specified and directed..
M&L rendering 15 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed.
M&L for applying evenly a coat of blown type bitumen 85/25 at the rate of 1.50 kg per square metre over a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm and blinding with clean dry sand @ 0.05 Cum per Sqm over roof surfaces including preparation of old surface complete all as specified and directed.
Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and directed.
M&L for point wiring for the following with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-
One light point or fan point controlled by one switch
One Call Bell point controlled by one push button switch
5 Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No 92 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directe:-
One light point or fan point controlled by one switch
One Call Bell point controlled by one push button switch
5A mp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No 94 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire
S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed. .
S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed. .
S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed. .
S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed. .
S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed.
S&F modular bell push 6A one module complete all as specified and directed. .
S&F switch piano type flush, single pole, one way 5 A, 230 V complete all as specified and directed.
S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed. .
S&F switch piano type flush, single pole, one way 15 A, 230 V complete all as specified and directed.
S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed. .
S&F ceiling rose, surface backlite,three terminal complete all as specified and directed. .
S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. .
S&F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed. .
S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed. .
S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed. .
M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge.
S&F in repairs testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.
S&F in repairs testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.
S&F in repairs sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quote rate
S&F in repairs double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate
S&F in replacement TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.
S&F in replacement socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination complete all as specified and directed.
v k builder
maharaja construction and suppliers
m/s mahendra kumar khare contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .