Renovation and Upgradation works of Office Chamber and Rest Room of Honble Minister etc. 2nd Floor of Block E Janata Bhawan Dispur, Guwahati 6.

Amount

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.5mm thick

1.0mm thick

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement prime

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Peroviding fitting and fixing of wal panelling with 19mm thick ply wood board and pasting with 1mm thick laminates on fair faces and making groves or making design as per approved drawings including varnishing and polishing where ever necessay complete as per direction of the deptt.

Providing fitting and fixing Wooden Blinds with Accessories & Installation etc. complete as directed

Providing fitting and fixing Partition with all necessary fittings etc. complete as directed

Providing fitting and fixing Console Table with all necessary fittings etc. comple as directed.

Providing fitting and fixing wooden Finish Office Table (7'x3') will all necessary fittings etc. complete as directed.

Providing fittttttnd fixing Office Chair wooden with all necessary fittings etc.complete as directed.

Providing fitting and fixing Sofa 3+1+1with centre table & side table (2 Pcs) with all necessary fittings etc. complete as directed.

Providing fitting and fixing Glass Film with all necessary fittings etc. complettttttttt directed

Providing fitting and fixing Door Mat with all necessary fittings etc. complete as directed

Providing fitting and fixing Bath Mat with all necessary fittings etc. complete as directed

Providing fitting and fixing Showpiece with all necessary fittings etc. complete as directed

Providing fitting and fixing Globe with all necessary fittings etc. complete as directed

Providing fitting and fixing Tissue Box with all necessary fittings etc. complete as directed

Providing fitting and fixing Showpiece artificial Flowerwith all necessary fittings etc. complete as directed

Providing fitting and fixing Multi Holder with all necessary fittings etc. complete as directed

Providing fitting and fixing Flower Base with all necessary fittings etc. complete as directed

Providing fitting and fixing Dustbin with all necessary fittings etc. complete as directed

Providing fitting and fixing Handcraft with all necessary fittings etc. complete as directed

Providing fitting and fixing Wall clock with all necessary fittings etc. complete as directed

Providing fitting and fixing Door Bell with all necessary fittings etc. complete as directed

Providing fitting and fixing 3+1+1 Sofa Upholestry change with polish etc. complete as directed.

Providing fitting and fixing Accessories Stoppers, Handle, Lock etc. with polish etc. complete as directed

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

3 pin 5/6 A socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm)

4 Module (125mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module

4 Module

8 Module

12 Module

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supply, installation Testing and Commissioning of 1200mm sweep BEE 5 star rated, ceiling fan with Brush Less Direct ccurrent (BLDC) Motor class of insulation B 3 nos. blade ,30cm long down rod, 2 nos. canopies shackle kit safety rope copper winding, Power Factor not less than 0.9 service value (CMM/W) minimum 6.00, Air deliveery minimum 210CMM, 350RPM (Tolerance as per IS 374-2019 THD less than 10% remote or electronic.regulator unit ofr speed contron and all remaining accessories incluidng safety in, nut,bolts washers, temperature rose =75 degree C (max) insulation resistance more that 2 mega ohm, suitale for 230 v, 50Hz single phase AC supply earting etc. complete as required.

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved specified and directed by the Deptt. (SKYLAND/Vee-Dee/V-GUARD/VERTEX /INDO/VENUS make)

Supplying including fitting fixing of following A.C. 2 Model starter in the existing 2 model Modular board necessary connection as approved by the Deptt. As srequired complete and as directed by the Deptt. 25 Amp. 2 Module Starter

Supplying installation tsting and commissioning of Exhust fan 225mm air flow as rquired 1.5sq.mm copper mulstrand wire connection an as specified and directed by the Deptt. Orient/Usha/Crompton make

Supplying and fixing of recessed Jaquar or equivalent Phillips/Wipro LED spot light fittings complete with shade back plate including connection cable, as approved by the deptt. Etc. as required 6 watt LED Light.

Supplying installation, testing and commission of the following indoor Decorative Recess-mounted liner LED strip light premium 50W with Derver complete with all accessories such as ballast, starter etc. in the false ceiling type Armstront /Gypsum or similar ceiling mounting with necessary support with 1.5sq.m.m PVC insulaetd S.C. copper conductor as required and as directed by deptt. (Phillips/Jaquar/LT/Wipro make) 50W LED Strip Light.

Supplying installation testing and commissioning of Recess-mounted, COB based tiltable lineat spot light die case aluminium housing with beam angle 30degree LRNEO15010XCLRNE015010XC as required 1.5 sq.mm copper multistrand wire connection an as specified and dirrrrrrrby the deptt. 10 W Recesses-mounted ,COB based tiltable linear spot light die case aluminium housing with beam angle 30 degree LRNEO15010XCLRNE015010XC (Phillips/Jaquar make)

BIJAY KALITA (BID ID -255822)