Up-gradation of existing CCTV surveillance system at VikasSadan.

Dome Camera 5MP "Supply Installation Testing & Commissioning IP Dome camera with1/2.8” inch or better progressive CMOS, Effective pixels 2592 x 1944 (5 MP approx.) @ 25/30 fps or better, Varifocal motorized lens of range 4 to 10 mm or better, auto focus with remote zoom and IR cut filter, Minimum Illumination Sensitivity- Color-0.4 lx; Mono-0.05 lx; IR- ~ 0 lx, IR range 40 mtrs or more (IR LED's with effective distance upto 40 meter or better and 30 meter for colour view in night), Dynamic range- 130 dB or better, True day/night, Signal to noise ratio > 50 dB, Automatic Electronic Shutter (AES) with shutter speed range 1 sec -1/30000 sec or better, Dynamic noise reduction, Video compression H.265/H.264/OEM, White balance, Backlight Compensation, True Day/Night, Audio input/output- line level I/O, Triple streaming, SD card support up to 2 TB or more with overwrite settings, Auto back focus for fast installation, Password protection, IP address filter, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE. Video analytics- AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording Camera should have MTBF of > 60000 hr. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. and as per specification sheet attached complete as required"

Bullet Camera 5MP "Supply Installation Testing & Commissioning IP Dome camera with1/2.8” inch or better progressive CMOS, Effective pixels 2592 x 1944 (5 MP approx.) @ 25/30 fps or better, Varifocal motorized lens of range 4 to 10 mm or better, auto focus with remote zoom and IR cut filter, Minimum Illumination Sensitivity- Color-0.4 lx; Mono-0.05 lx; IR- ~ 0 lx, IR range 50 mtrs or more (IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night), Dynamic range- 130 dB or better, True day/night, Signal to noise ratio > 50 dB, Automatic Electronic Shutter (AES) with shutter speed range 1 sec -1/30000 sec or better, Dynamic noise reduction, Video compression H.265/H.264/OEM, White balance, Backlight Compensation, True Day/Night, Audio input/output- line level I/O, Triple streaming, SD card support up to 2 TB or more with overwrite settings, Auto back focus for fast installation, Password protection, IP address filter, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE. Video analytics- AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording Camera should have MTBF of > 60000 hr. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. and as per specification sheet attached complete as required"

Dome Camera 2MP Supply Installation Testing & Commissioning of Dome camera with 1/2.8” inch or better progressive CMOS sensor, Varifocal motorized lens of range 4 to 10 mm or better, auto focus with remote zoom and IR cut filter, Effective pixels 1920 x 1080 (approx. 2MP) or better @25/30 fps or better, Minimum Illumination Sensitivity –Color: 0.07 lx, Mono: 0.03 lx, & IR: ~0 lx, IR range 40 mtrs or more (IR LED's with effective distance upto 40 meter or better and 30 meter for colour view in night), Dynamic range- 120 dB, Signal to noise ratio > 50 dB, Automatic Electronic Shutter (AES) with shutter speed range 1 sec -1/30000 sec or better, Dynamic noise reduction, Video compression H.265/H.264/OEM, White balance, Backlight Compensation, True Day/Night, Audio input/output- line level I/O, triple streaming, SD card support up to 512 GB or more with overwrite settings, Auto back focus for fast installation, Password protection, IP address filter, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE+. AI based analytics- deep learning based object classification: person, vehicle. AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with 512 GB memory Card. Camera should have MTBF of > 60000 hr. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: ≤ 95% (non-condensing) or better Ratings- IP66 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. and as per specification sheet attached complete as required

Bullet Camers 2MP Supply Installation Testing & Commissioning of Bullet camera with 1/2.8” inch or better progressive CMOS sensor, Varifocal motorized lens of range 4 to 10 mm or better, auto focus with remote zoom and IR cut filter, Effective pixels 1920 x 1080 (approx. 2MP) or better @25/30 fps or better, Minimum Illumination Sensitivity –Color: 0.07 lx, Mono: 0.03 lx, & IR: ~0 lx, IR range 50 mtrs or more (IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night), Dynamic range- 120 dB, Signal to noise ratio > 50 dB, Automatic Electronic Shutter (AES) with shutter speed range 1 sec -1/30000 sec or better, Dynamic noise reduction, Video compression H.265/H.264/OEM, White balance, Backlight Compensation, True Day/Night, Audio input/output- line level I/O, triple streaming, SD card support up to 512 GB or more with overwrite settings, Auto back focus for fast installation, Password protection, IP address filter, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE+. AI based analytics- deep learning based object classification: person, vehicle. AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with 512 GB memory Card. Camera should have MTBF of > 60000 hr. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: ≤ 95% (non-condensing) or better Ratings- IP66 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. and as per specification sheet attached complete as required

ANPR Camera Supply Installation Testing & Commissioning of high resolution 5 Mp bullet camera with 1/2.8” inch or better progressive CMOS sensor, Effective pixels 2592 (H) x 1944 (V) (5MP approx.) or better @60fps, Varifocal motorized lens of range 5 to 40 mm or better, IR range- 50 m or more(IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night), Minimum Illumination Sensitivity-Color 0.007 lx, Mono 0.0008 lx & IR ~ 0 lx or better, Dynamic range≥130 dB, True Day/night, White balance, Automatic Electronic shutter, BLC, Privacy Masking, Dynamic noise reduction , Triple streaming, Audio input/output-line level I/O, SD card support up to 2TB with overwrite settings, Auto back focus for fast installation, Video Compression: H.265/H.264, Password protection, IP address filter, watermarking, HTTPS encryption, full end to end encryption with supported VMS or devices.Simple single cable installation with POE+. AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60°C or better, Humidity: Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC. Display- It must display the details like image of vehicle, speed, time stamp and Display location of the violating vehicle. AND as per specification sheet attached complete as required

Multi Sensor Camera 12 MP Supply Installation Testing & Commissioning of 12MP IP Multi sensor camera with 4x 1/2.8” inch or better progressive scan CMOS sensor, Effective Pixel: 4 X 2048 (H) x 1536 (V) or more @ 30 fps or better, Varifocal motorized lens of 3.3- 5.7 mm or better, Motorized zoom and focus, Minimum Illumination Sensitivity- Color: 0.1 lx Mono: 0.01 lx & IR: 0 lx. WDR- 120 dB or better, IR range- 360⁰ upto 30 Mtrs or more, True Day/Night, Dynamic Noise Reduction, Audio input/output - line level I/O, SD card support up to 1TB with overwrite settings, auto back focus for fast installation, Video Compression: H.265/H.264, One IP address for all four imagers, Simple single cable installation, Password protection, HTTPS encryption, IP address filter, watermarking, HTTPS encryption, full end to end encryption with supported VMS or devices AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60°C or better, Humidity: Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC and as per specification sheet attached complete as required

PTZ Camera 2 MP Supply Installation Testing & Commissioning of Outdoor IR HD PTZ Camera with 1/2.8" progressive scan CMOS, Effective pixels 1920 x 1080 or better @ 60 fps or better, Motorized varifocal lens with 30x Optical Zoom (4.3-4.5mm) to (129 -135 mm) or better; °, Min.- 16X Digital Zoom, Minimum Illumination Sensitivity- Color: 0.01 lux, Mono: 0.004 lux, with IR: 0 lux, WDR 120dB or better, Dynamic Noise Reduction, BLC, White Balance, Pan Range- 360° continuous, Tilt Range- 0° to 90°, Pan/Tilt Modes- Pan: 0.1°/s - 300°/s & Tilt: 0.1°/s - 200°/s with preposition accuracy of ±0.1°, Presets- 256 or more, Automatic Tours, IR distance 200 mtr. or better, IR either internal or external with full 360 deg PAN coverage; White Led illumination 60m or more; Memory card slot (support up to 2 TB or more), Audio input/output- line level I/O, Auto back focus for fast installation, Video Compression: H.265/ H.264, Password protection, HTTPS encryption, IP address filter, watermarking, HTTPS encryption, full end to end encryption with supported VMS or devices, Simple single cable installation with POE+. AI based analytics- deep learning based object classification: person, vehicle, AI based analytics deep learning based with- Objects in Area, Object Loitering, Objects Crossing Beam, Object Appears or Enters Area, Object Not Present in Area, Objects Leave Area, Object Stops in Area ,Tamper Detection, video tampering alarm, camera should support 5s pre-alarm recording. All mentioned analytics should be able to run simultaneously. Onboard FIPS140-2L3certifiedTPM, Secure Boot, Signed and encrypted firmware, CCEAL6+, Iris control : P-iris, Privacy masking zone ( up to 30 zone). Auto network replenishment (ANR)- In case of network failure, the recording should be stored on the on-camera storage device and later synced with main storage to ensure 100% recording. Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 2 TB. It should be supplied with 2 TB memory Card. Operating Condition- Temperature: -10°C to +60 °C or better, Humidity: Humidity: ≤ 95% (non-condensing) or better Ratings- IP66, IP67 or better, Vandal proof IK10 housing, or better. Type 4X standards compliance. Certifications- ONVIF Profile (S, G , T & M), UL, BIS, CE, FCC, RoHS & STQC and as per specification sheet attached complete as required

Workstation Client Workstation a) Processor – Intel Core i7-10700K or equivalent CPU b) Memory – Minimum 32 GB c) Hard disks – 1 TB SSD Disk d) OS- Windows 11 Pro, 64bit e) Network Card – 1Gbit/s network card f) GPU - NVIDIA RTX A4000

Disply Supply, Installation, Testing & Comissioning of 43 inch 4K LED display, IPS / VA Panel Technology, Landscape & Orientation Resolution 3840X 2160 (16.9) UHD. Brightness 350 NIT, Built in Wi-Fi and Bluetooth inbuilt digital signage player, Android Built in Memory 16 GB, Processor Cortex A55x4 1.1 Ghz Processor Triple Core Mali 470 600 MHz 16 GB Memory24/7 operation, Brightness 350 nits, Contrast Ratio 1100:1, 178/178 Viewing Angle (orizontal: Vertical), 8ms Response Time (milli seconds) Built in speaker (10W+10W). Inputs DVI-D, Display Port, HDMI & Dual USB Plug & Play , RJ45 LAN, Output Stereo mini Jack, Remote Controlling of device, Display remotely controlled Internal/External, BIS Certificates etc. Complete as required

Core Switch SITC & fixing of L3 Core switch 20x100/1000 Base-X SFP ports,4x1000 RJ45/SFP 100FX/1G combo user ports* 4x1G SFP(+) uplink ports (*10G upgradeable), 2xSFP+ ports and 2x Stacking ports (Comprises 40 Gbps stacking Bandwidth). The proposed switch will have redundant Hot Swappable RPS from day-1. Switch Should support non-blocking wire speed. Should have Non-Blocking Architecture. The switch will have minimum 210 Gbps switching capacity. The switch should have minimum 125 Mpps forwarding rate. Each Switch should have Switch and Transceivers should be from the same OEM. Should have advanced routing with OSPF, ISIS, PIM and VRF for IPv4 and IPv6. Static Routing, RIP , from day 1,Should support ISSU from day 1 ,Should support stacking with min 4 members in a stack, Neighbour discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 829,475 Hr. Preferred Make : CISCO/Juniper/Alcatel