Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹29.4 L+₹92,307 (3.24%)Rejected-AOC 1442 1 NANADANPURA BABINA CANTT TEHSIL DISTT JHANSI UP | BABINA | JHANSI | UP | L2 | Rejected-AOC NOT LOWEST BIDDER | |
| 3 | L3₹30.6 L+₹2.1 L (7.46%)Rejected-AOC | L3 | Rejected-AOC NOT LOWEST BIDDER | |
| 4 | L4₹30.7 L+₹2.2 L (7.88%)Rejected-AOC | L4 | Rejected-AOC NOT LOWEST BIDDER | |
| 5 | L5₹30.9 L+₹2.5 L (8.66%)Rejected-AOC | L5 | Rejected-AOC NOT LOWEST BIDDER |
| Sl No | Description | Qty | Unit | HARNAM SINGH ANIL SINGH L6 | M/s Indu Enterprises L4 | M/S SHIVA TRADERS L2 | M/S A.R BUILDERS L1 | M/S Ritu Tandon L8 | PRATAP CONSTRUCTION L5 | M/S Kharya Associates L7 | RAHUL ASSOCIATES L8 | MS SHUBHAM SANTOSH JAIN L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed. | 690 | Sqm | 100 ₹69,000 | 79 ₹54,510 | 95 ₹65,550 | 73 ₹50,370 Lowest | 87 ₹60,030 | 85 ₹58,650 | 90 ₹62,100 | 87 ₹60,030 | 80 ₹55,200 |
| 2.00 | M & L for Non-skid digital coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed. | 40 | Sqm | 1,400 ₹56,000 | 1,360 ₹54,400 Lowest | 1,420 ₹56,800 | 1,370 ₹54,800 | 1,410 ₹56,400 | 1,500 ₹60,000 | 1,390 ₹55,600 | 1,410 ₹56,400 | 1,380 ₹55,200 |
| 3.00 | All as the item above but as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified. | 6 | Sqm | 1,400 ₹8,400 | 1,420 ₹8,520 | 1,390 ₹8,340 | 1,370 ₹8,220 | 1,630 ₹9,780 | 1,400 ₹8,400 | 1,410 ₹8,460 | 1,630 ₹9,780 | 1,350 ₹8,100 Lowest |
| 4.00 | M/L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed. | 30 | Sqm | 1,350 ₹40,500 Lowest | 1,500 ₹45,000 | 1,540 ₹46,200 | 1,370 ₹41,100 | 1,440 ₹43,200 | 1,370 ₹41,100 | 1,470 ₹44,100 | 1,440 ₹43,200 | 1,400 ₹42,000 |
| 5.00 | M/L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified. | 9 | Sqm | 1,500 ₹13,500 | 1,400 ₹12,600 | 1,470 ₹13,230 | 1,370 ₹12,330 | 1,420 ₹12,780 | 1,360 ₹12,240 | 1,440 ₹12,960 | 1,420 ₹12,780 | 1,350 ₹12,150 Lowest |
| 6.00 | Material and Labour for Vitrified tiles dark or light shade /double charge /ultra charged 1200 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.Make : Johnson tiles / Kajaria / Orient Bell/AGL, Sample as approved By AGE (I). | 120 | Sqm | 2,050 ₹2,46,000 | 2,000 ₹2,40,000 | 220 ₹26,400 Lowest | 1,970 ₹2,36,400 | 1,955 ₹2,34,600 | 2,050 ₹2,46,000 | 1,960 ₹2,35,200 | 1,955 ₹2,34,600 | 2,000 ₹2,40,000 |
| 7.00 | Material and Labour for Vitrified tiles dark or light shade /double charge /ultra charged 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell/AGL, Sample as approved By AGE (I). | 15 | Sqm | 2,230 ₹33,450 | 2,260 ₹33,900 | 2,300 ₹34,500 | 2,270 ₹34,050 | 2,300 ₹34,500 | 2,270 ₹34,050 | 2,330 ₹34,950 | 2,300 ₹34,500 | 2,200 ₹33,000 Lowest |
| 8.00 | Material and Labour for glazed ceramic exterior wall tiles 6 to 8 mm thick etc set & jointed in cement and pointed in coloured cement to match the shade of tile over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified & directed. Make – Johnson (Endura) or equivalent in Johnson tiles / Kajaria / Orient Bell/AGL/ Euro tiles, sample as approved by AGE (I). | 50 | Sqm | 2,300 ₹1,15,000 | 2,210 ₹1,10,500 Lowest | 2,250 ₹1,12,500 | 2,270 ₹1,13,500 | 2,310 ₹1,15,500 | 2,230 ₹1,11,500 | 2,300 ₹1,15,000 | 2,310 ₹1,15,500 | 2,300 ₹1,15,000 |
| 9.00 | M/L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed. | 200 | Sqm | 1,550 ₹3,10,000 | 1,510 ₹3,02,000 | 1,610 ₹3,22,000 | 1,490 ₹2,98,000 | 1,420 ₹2,84,000 Lowest | 1,530 ₹3,06,000 | 1,600 ₹3,20,000 | 1,420 ₹2,84,000 Lowest | 1,600 ₹3,20,000 |
| 10.00 | M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand in vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed. | 20 | Sqm | 1,510 ₹30,200 | 1,580 ₹31,600 | 1,600 ₹32,000 | 1,490 ₹29,800 | 1,480 ₹29,600 Lowest | 1,560 ₹31,200 | 1,500 ₹30,000 | 1,480 ₹29,600 Lowest | 1,550 ₹31,000 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
23 Jun 2025, 6:00 pmClosed
BRIJ BIHARI
LAKEVIEW CAMP MIL STN TALBEHAT 284125
REPAIR/MAINT OF FLOOR, PLUMBING AND SANITARY WORKS AT VARIOUS ZONE AT MIL STN TALBEHAT
2025_MES_713051_1
AGE(I)/TBT/34 OF 2025-26
Open Tender
Civil Works
Item Rate
180 days
AGE (I) TALBEHAT
7 documents required · 7 mandatory
₹500
AGE (I) TALBEHAT
₹60,000
Yes
26 Aug 2025
7 Jun 2025
25 Jun 2025
9 Jun 2025
23 Jun 2025
16 Jun 2025
Amount
Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.
M & L for Non-skid digital coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.
All as the item above but as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.
M/L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.
M/L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified.
Material and Labour for Vitrified tiles dark or light shade /double charge /ultra charged 1200 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.Make : Johnson tiles / Kajaria / Orient Bell/AGL, Sample as approved By AGE (I).
Material and Labour for Vitrified tiles dark or light shade /double charge /ultra charged 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shed of tiles, over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell/AGL, Sample as approved By AGE (I).
Material and Labour for glazed ceramic exterior wall tiles 6 to 8 mm thick etc set & jointed in cement and pointed in coloured cement to match the shade of tile over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified & directed. Make – Johnson (Endura) or equivalent in Johnson tiles / Kajaria / Orient Bell/AGL/ Euro tiles, sample as approved by AGE (I).
M/L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.
M&L Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchand in vertical surfaces such as skirting, dados and risers to steps etc including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles 300x600 / 450 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as spd & directed.
Demolition of stone slab and tiles of any description or thickness in floor aprons etc laid / bedded and pointed in any mortar.
M & L for 20mm thick granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.
Moulding as In edge of granite platform complete all as specified & directed.
M&L for preparing plastered or unplastered surfaces of wall, pilasters, cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, molds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed.
Description same as per item No 01 above but applying subsequent coat of white wash on walls complete all as specified and directed.
M&L for preparing plastered or unplastered old surfaces on ceiling applying one coat of white wash complete all as specified and directed.
Description same as per item No 03 above but subsequent coat of white wash on ceiling in lieu of walls complete all as specified and as directed
M&L for preparing of surfaces of walls, pilasters, cornices etc. by washing, rubbing down & stopping etc. and applying one coat of oil bound distemper in any colour complete all as specified and directed. Make :-Asian Paints (Brand-Tractor Uno)/ Berger paint (Brand -Bison) / Nerolac paint (Brand-Beauty)
Description same as per item above but applying subsequent coat of oil bound distemper on walls complete all as specified and directed.
Complete removing of existing treatment of wall surfaces and applying two coats of oil bound distemper in any colour over a coat of 1mm thick wall care putty complete all as specified and directed.Make :-Asian Paints (Brand-Tractor Uno)/ Berger paint (Brand -Bison) / Nerolac paint (Brand-Beauty)
M&L for preparation of old painted surfaces of wood & wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint (Ist quality) complete all as specified and as directed. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Sunthetic Hi- Gloss)
M&L for preparation of old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.(Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Sunthetic Hi- Gloss)
Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.
All as per srl item above but 20 mm bore
S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.
All as per srl item above but 20 mm bore
M&L brick wall or plaster cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets with padestal, CP waste coupling 32mm ,waste pipe complete all as specified and directed.
S&F in repair Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.
S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed
S&F in repair One piece ceramic floor mounted western water closet white with soft close seat cover including flush tank, trap and all fittings complete all as specified and as directed, Make :(Hindware Cat No. 92562 (S-22)/Cera Cat No. S1013119
S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed.
Ditto Item No 34 but length 60 cm long.
S&F in repairs PVC waste pipe 32mm bore 600mm long with one end socketed complete all as spd & directed.
S&F in repair CP grating round 110 mm with hole/with out hole as required complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.
Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.
M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.
M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in band,coping,slightly rounded or chamfered angles and throating,and similar work including necessary form work all as specified and directed.
M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for Rendering 15mm in CM 1:4 on fair faces of brick work finished even and smooth without using extra cement complete all as specified and as directed.
S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.Make : Parryware , Hindware ,Prayag, Jaquar
S & F in repair 15mm bore pillar tap, foam flow with flange, Half Turn/ Quarter turn, fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. Make : Parryware , Hindware ,Prayag, Jaquar
S & F in repair 15mm bore light angular stop valves with wall flange, Half Turn / Quarter turn, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Cera, Parryware , Hindware ,Prayag, Jaquar
S&F Half Turn / Quarter turn, 15mm dia CP central hole basin mixer without pop up waste system with 450 mm flexible hose for mixing of hot and cold water screwed for iron pipe and fixed complete all as specified and directed. Make : Parryware or Hindware , Prayag or Jaquar
S&F Half/quarter turn chromium plated 15 mm bore wall mixture 2 in 1 with provision for over head shower with 115 mm LB pipe & wall flange complete with bend pipe and wall flange, complete all as spfd & directed , Make:-Parryware, Hindware, Jaqur.Prayag
S&F in repair brass chromium plated towel rail 20mm dia D type 60cm long between flange all as specified and directed by Enge-in-Charge
S&F Sink made of stain less steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union overall size not less than 495x429mm, bowl size 410x330x 160mm complete all as specified and directed.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm bowl size 410mm X330mm x160mm complete al as specified and as directed
S&F in repair bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws complete all as spfd and directed by Engr-in-charge.
Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n.exc 500trs capacity each complete all as specified and directed
Dismantling of existing unserviceable water tank of any description capacity exc 500 Ltr but n.exc 1000trs capacity each complete all as specified and directed
S& F rotational moulded synthetic (HDPE) water storage tank 500litre capacity (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as spd & directed.
S&F rotational moulded polethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion all as specified SSR Part-I complete all as spd & directed.
S&F in repair ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as spd & directed.
S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe all as specified and as directed
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete and all as specified and directed.
S&F for 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified.
S&F PVC bend/ shoe of dia. 110mm complete all as specified incl. taking down old unserviceable complete all as specified.
S&F in repair tubular stainless steel curtain rod 20mm dia with including fixing brackets complete all as specified and directed.
S&F decorative type knobs with bracket of Stainless steel fixing at end of curtain rod complete al as spd & directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples completed all as spd & directed.
S&F in repair Stainless steel Magnetic door catcher size 5.08x2.54x2.54 cm with plate completed all as spd & directed.
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.
S & F sheet glass, ordinary quality 3mm thick fixed with oil putty size of glass not exc 0.50 Sqm in each pane for steel or wooden window fixed with wooden bead and pin tacked complete all as specified and directed.
S & F figured glass pin headed type, 4mm thick and fixed with oil putty, size of glass n. exc 0.50 sqm in each pane for steel or wooden windows/doors fixed with wooden beadand pin tacked complete all as specified and directed.
S&F in repairs 18mm thick (one side colour decorative lamination & other side balancing lamination sheet) solid PVC board with cement solvent adhesive for shutter /kitchen cabinet/cup board shutter/ partition wall / wall cabinet and similar works complete all as specified & directed.(Note : Colour approved by Engr-in-charge) Make :- Rajshree or Equivalent as approved by Engr-in-charge.
S&F continous (Piano) hinges, brass finish of whem open 30mm width of flaps complete all as specified and as directed
M&L for IInd class H/W Plain , Solid , Straight chowkats and frames sec area n exe 40 sqcm complete and all as specified..
S&F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed
S&F 75mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed
Demolition of Reinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete.
S&F steel reinforcement of TMT Bars of size 8mm dia and over cut to length bent to shape as required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed.
M&L for form work, fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) etc complete all as specified and directed.
M&L for form work fair finished to edges of concrete flats, treads floor and roofs n exc 20 cm wide and sides of RCC/PCC bends in walls (horizontal or slopping) and similar works exc 10 cm but n exc 20 cm wide complete all as specified and directed.
M & L for RCC 1:2:4 (Nominal Mix), type B-1, using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc .complete all as specified and directed.
S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets and similar work complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.
S & F in repairs 18 mm thick Celuka ply / PVC of grade 1 quality of one side prelaminated and other side plain white or colour to make kitchen cabinet/ drawer shutters and similar work complete as per specifications and as directed by the engineer - in - charge.Make:-Rajshri or equivalent
S & F in repairs 12 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.
S & F in repairs 6 mm thick Celuka ply / PVC of grade 1 quality of both side plain white or colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet back covering and pull out drawer base complete as per specifications and as directed by the engineer - in -charge. Make Rajshri or equivalent.
S & F auto closing hinges 35 mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed Make:- KAFF or equivalent
S & F Ball bearing runners 45 mm (length 20" to 25") Telescopic , full extension load capacity 50 kgscomplete all as specified and as directed Make:- KAFF or equivalent
S & F stainless steel handles 100 mm size for kitchen cabinet/ any shutters complete all as specified and as directed.
S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 795 x 500 x 150 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (Thali basket) pull out type, size 530 x 500 x 200 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm with necessary fixing clips etc complete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 x 200 mm with necessary sliding frame structure, fixing clips etc complete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (storage basket) pull out type, size 530 x 500 x 100 mm with necessary fixing clips etccomplete all as specified and directed by Engineer-in-charge.
S&F chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc. complete all as specified and directed by Engineer-in-charge.
Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)
M/S SHIVA TRADERS (BID ID -3333656)
MS SHUBHAM SANTOSH JAIN (BID ID -3334072)
M/s Indu Enterprises (BID ID -3333370)
PRATAP CONSTRUCTION (BID ID -3333279)
HARNAM SINGH ANIL SINGH (BID ID -3333100)
M/S Kharya Associates (BID ID -3333300)
RAHUL ASSOCIATES (BID ID -3333545)
M/S Ritu Tandon (BID ID -3333925)
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .