CERTAIN REPAIRS TO JOINERY, PLASTERING, ROOFING, PLUMBING, TILING, FLOORING, SANITARY FITTING AND OTHER MISC WORKS TO JCOs / OR MD ACCN AT SITE-III AND NEW SF AT FATEHGARH CANTT

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L for 75 mm thickness PCC 1:3:6 type C2 using 40mm stone aggregate in plinth protection including finishing smooth without using extra cement, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2( using 40mm graded stone aggregate) as in flooring and mass concrete to complete all as specified and directed

M&L for coloured chequred cement concrete tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floor with white cement and pigment including screed bed of 15mm thick in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 5mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete complete all as specified and directed.

M&L for preparation of new plastered surfaces & applying 2 coats of cement base paint over a coat of primer complete all as specified and directed.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of alkali resistant primer including preparation complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 450 x 300 x 7mm thick on vertical surface over 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed.

M & L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) 15 mm thick CM including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking up or down steel tubing and connections, incl cleaning for refixing or removal to store complete all as specified and directed.

(a) 15 mm dia

(b) 20 mm dia

M&L for laying GI medium grade tubing incl all fittings laid in floors /fixed on walls complete all as directed for the following bore of pipes complete all as specified and directed.

(a) 15 mm dia

(b) 20 mm dia

S&F in rep gun metal gate valve 20mm dia, globe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified an directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia and waste pipe complete all as specified and directed.

Demolition of cement concrete (reinforcement cut as required to facilitate demolition) RCC water tank of any description & in any position not specifically provided for complete all as specified and directed

Dismantling of PVC water tanks capacity exc 250 ltrs and n.exc 500 ltrs and removing to store complete all as specified and directed.

S & F 500 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair 20mm dia Ball valves standard of PTMT any colour high pressure with epoxy coated aluminium rod & high density plastic ball screwed,for iron pipe and fixed.(Minimum weight 20mm - 210gms complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S & F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia pipe complete all as specified and as directed.

S&F in repair 15mm dia Bib tap standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S & F in repair stop valves / angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F in repair 15 mm bore concealed Stop stop cock fancy type screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S & F in repair tubular towel rail 20 mm dia D type brass chrormium plated 600 mm long between flanges complete all as specified and as directed.

S & F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug / waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460 mm with bowel size 410 mm x 330 mm x 160 mm complete all as specified and s directed.

S&F in repair utencil plate rack 1 mm th of size 60 cm x 60 cm x 25 cm, of pattern as approved by engineer-in-charge, fixed to wall by means of four nos rawal plugs, complete in all respect complete all as specified and directed

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs in CM 1:4 complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 sqm each complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf. Note : Glass, and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf without sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm welded to FI frame and 100mm spacing of guard bar complete all as specified. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

All as per item No 43 above but as in ventilator fixed type (partly glazed and gauzed) complete all as specified and directed

S&F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note :-M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note :- M.S. hold fast/ lugs or SS dash fasteners shall be paid for same item).

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorativetype flush door type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. Fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately).

S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed

S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded complete all as specified and directed

S & F MS work as in widnw guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorativetype wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. S/S wire mesh incl in this item. (Note: stainless steel butt hinges shall be paid separately).

Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 6mm thick pre laminated moulded wall lining for kitchen cabinet, cupboard. The laminated shutter should be pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 6mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cabinet, cupboard. The laminated shutter should be pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S&F factory made Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed

S & F 30 mm thick factory made flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

M&L for Cement concrete type B0 1:2:4 (12.5m m graded stone aggreagte) as in filling inside pressed steel chowkhats all as specified and directed

M & L for PCC 1 : 3 : 6 type C1 using 20 mm graded stone aggregate as in fixing of hold fast including necessary form work complete all as specifed and directed.

S & F ball catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc complete all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F sheet glass ordinary quality 3 mm thick and glazing with oil putty or fixed with bead / glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S & F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors complete all as specified and directed

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, fixed in aluminium windows/vent complete all as specified and directed

S&F Aluminium handles, cast type anodised of size 100mm etc complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 150mm size etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section of 200mm size etc complete all as specified and directed.

S&F 125mm hasp and staple, aluminium anodised, incl mils steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F Aluminium handles, cast type anodised of size 150mm etc complete all as specified and directed.

S&F 300 mm long Aluminium alloy. anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F stainles steel butt hinges of size 100mm medium weight complete all as specified and directed

S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brakets 02 nos finalie 02 nos) etc complete all as specified and as directed.

S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 30 mm etc complete all as specified and as direced.

S & F in repair mild steel helical door spring 300 mm longe ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M & L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

Dismantling framed work timber scantlings 40sq. cm and over in section, in any position all as specified and directed

M&L Rolled mild steel Fe-410-W(Gde-E-250) quality-A in rolled sections as in main and cross beams, hip and jack, water tank where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified and directed

S&F for Expanded metal in available size weight not exc. 4.00 kg per sqm , cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed

Dismantling of cast iron / PVC / AC / SGSW pipes alongwith fittings and accessories upto 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with new clamps complete all as specified and directed

S&F 75 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with new clamps complete all as specified and directed

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 110 mm bore pipe with clamps complete all as specified and directed

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 75 mm bore pipe with clamps complete all as specified and directed

S&F PVC (SWR) bends any radius for 110 mm bore pipe complete all as specified and directed

S&F PVC (SWR) bends any radius for 75 mm bore pipe complete all as specified and directed

S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal with acess door opening for cleaning complete all as specified and directed

S&F 110mm bore PVC (SWR) Cowl for vent complete all as specified and directed

S&F PVC (SWR)110mm branch piece, single (single Y) equal or unequal complete all as specified and directed

S&F PVC (SWR) 75mm branch piece, single (single Y) equal or unequal complete all as specified and directed

S&F in repair CP grating doom 100/125mm dia with or without waste hole etc complete all as specified and directed.

Supply & Fixing in repair 32/40 mm dia PVC Waste pipe suitable for Wash hand basin/kitchen sink complete all as specified and directed

S&F in repair CP sink waste coupling 70/75mm dia incl all fittings complete all as specified and directed.

P K ENTERPRISES (BID ID -3083759)

M/S S P CONSTRUCTION (BID ID -3084707)

M/S DEEN ENTERPRISES (BID ID -3091086)

M/S SRI JAGDAMBE TRADERS (BID ID -3076521)