REPAIR/ MAINT OF INTERNAL/EXTERNAL PLASTER, PLINTH PROTECTION, JOINERY, PLUMBING, ROOF CHAJJA IN DOMESTIC AREA AT AF STN UTARLAI

Amount

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer over rendering of 10mm thick in CM 1:6 on concrete /stone/brick masonary surface, finished even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash over rendering 5mm thick un CM 1:3 on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer over rendering 15mm thick in two layer, 1st layer of 10mm thick in CM 1:6 and IInd layer of 5mm thick in CM 1:4 on brick/concrete surfaces finished even and smooth without using extra cement including taking down old cement plaster complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm all as specified.

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed

All as per item No 06 above but exc 1 Sqm and n.exc 2 Sqm each

Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening complete all as specified.

S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube,suppling and fixing in opening as per specification & drawing complete all as specified and directed.

S&F Fatory made solid panel PVC door shutter, 30mm thick(stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour PVC sheet for top rail,lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification & drawing

S&F 30mm th flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S&F 35mm th 2nd class Hard wood (Hollock) Kiln seasoned and chemically pressure treated glazed & skeleton shutters, open rebated at prepared to receive glass/gauze (without sash bars) edges of framing plain, chamfered, or rounded, fitted with and incl cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Pt-I, Sec-8, clause 8.24 (a) fixed to chowkhats complete all as specified and directed.

S&F 2nd class HW 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces.The size of rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed

S&F 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified.

S&F factory made for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and with & including making good the plaster of wall in CM 1:4 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.

Supply and fixing galvanized stainless steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

S & F 100 mm long medium weight, stainless steel Butt hinges complete all as specified and directed..

S & F 100 mm long medium weight, mild steel Butt hinges complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum handle cast type anodized 150 mm size complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M & L for applying two coat of synthetic enamel paints over one coat of pink primer on wooden surfaces over 10 cm width or girth including preparation new surfaces complete all as specified and directed.

M&L two coats of synthetic enamel paint to steel surfaces of any description,over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces complete all as specified and directed.

S & F in repair galvanized stainless steel wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square not exc 0.50 sqm in each pane, including hacking out old broken glass of any size and quality complete all as specified and directed.

S&F sheet glass 3mm thick ground or obscured or frosted or pin headed type , on one side & glazing with oil putty in square/ rectangular n.exc 0.5 Sqm in each pane including hacking out old broken glass of any size and quality complete all as specified.

S&F 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement including wire mesh ,glass panes etc complete, one shutter with glazing bars for glass penes and other shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on drawings drg No CEAA/TD/120 R dated 06 June 2002 sheet no 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.

S & F factory made for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc) including all accessaries and making the surface good including painting etc all as specifiedd in Drg No. CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.

S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc and similar work conforming to Fe-290, Gde -E-165 complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F 25mm dia fancy type PVC coated on MS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

S&F 20-25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.

Taking up or down steel water tubing of 15 mm bore and connections, including cleaning and refixing including connections in is old or new position including necessary cutting, threading, with necessary fittings like tee, elbow etc complete all as specified and directed.

Taking up or down steel water tubing of 20 mm bore and connections, including cleaning and refixing including connections in is old or new position including necessary cutting, threading, with necessary fittings like tee, elbow etc complete all as specified and directed.

Taking up or down steel water tubing of 25 mm bore and connections, including cleaning and refixing including connections in is old or new position including necessary cutting, threading, with necessary fittings like tee, elbow etc complete all as specified and directed.

S&F steel water tubing medium grade galvanized of 15 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors including taking down old tubing complete all as specified and directed.

S&F steel water tubing medium grade galvanized of 20 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors including taking down old tubing complete all as specified and directed.

S&F steel water tubing medium grade galvanized of 25 mm bore with all fittings and fixed complete to walls, ceilings or laid on floors including taking down old tubing complete all as specified and directed.

M & L for Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified.

Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) all as specified.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection finished concrete surfaces even and smooth without using extra cement complete as specified.

M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed.

M&L for 60mm thick M-35 grade, ISI marked machine made rubber moulded precast coloured interlocking tiles with grey cement and pigment confirming to IS 15658-2006 over 25mm thick sand cushioning laid over 50mm thick PCC 1:2:4 type B-1 using 20mm graded stone complete all as specified and directed. Note:- (i) Shape and colour shall be approved by Engr-in-charge. (ii) Edge pf paver block shall be closed using CM 1:3 and quoted rate shall be deemed to be inclusive, nothing extra will not admisible.

M & L for cement concrete type B1 1:2:4 (20mm graded aggregate) as in kerb, rounded and chamfered on edges etc complete all as specified and directed at site

M & L for rubber molded chequred cement concrete tiles 300 x 300 x 25mm thick laid with cement slurry over a 15mm thick screed bed jointed with CM 1:6 and pointed with grey pigment cement and pigments in floors all as specified.

S & F in repair vitreous china (water closet) squatting pan, orissa pattern, size 580 x 440 mm, white, with CI 100mm dia P or S trap front or white inlet and integral foot rests (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan pedestal pattern(EWC), white incl necessary fixing arrangments (excluding fixing bolts, flushing cistern and flush pipe) Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device icluding jet spray complete all as specified and directed..

S & F in repair 10 ltr cap. PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and 32mm flush pipe of polythene low or high density (including dismantling of half turn valve 32mm of any description if reqd) complete all as specified and directed.

S&F in repair wash hand basin vitreous china wash basin white flat back size 550x400 including supplied and fixed angle iron brakets errecting stand and CP Piller tap fancy type 1 No15 mm bore,32mm PTMT waste coupling& pvc waste pipe 32 mm dia and pvc 15mm 450mm long connection compleete all as specified.

S&F in repair PVC connection 15mm bore and 600mm lenth with PTMT nuts on both ends complete all as spfd and directed.

S&F in repair 15mm bore dia Chromium Plated fancy type bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair fancy type long shank pillar tap of 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type chromium plated stop valves/angle valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore two ways brass chromium plated angle cock cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule,long body complete all as specified and directed.

S&F in repair 15 mm bore dia fancy type CP stop valves, long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm bore all as directed.

S&F in repairs 15mm bore stainless steel CP Health faucet of standared quality and make with high denesity chromium plated flexible pipe of minimum length 1.50 mtr complete all as specified and directed.

S&F in repair chromium plated brass shower rose, 125 mm size with or without swivel joints long chromium plated arm including fixing to steel pipe or union 15mm bore complete all as specified and directed.

S & F in repair rotational moulded polyethylene double layered ISI marked white colour water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position including fixing of 20mm PTMT ball valve complete all as specified and directed.

S & F in repair rotational moulded polyethylene double layered ISI marked white colour water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including fixing of 25mm PTMT ball valve complete all as specified and directed.

M&L PCC 1:3:6 Type C-1 (using 20 mm graded coarse aggregate) finished concrete surface even & smooth without using extra cement as in platform below PVC tanks and all as specified and directed

S & F in repairs 5.50mm thick pvc acyrlic shelf 600mm long and 120mm wide with chromium plated railing ,mounted on decorative chromium plated bracket assembly set complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F in repairs cast iron floor trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified.

S&F in repairs plastic sheet covers for water closet, black,closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs vitreous China bowl urinal flat back, minimum size 465 x 355 x 265/430 x 370 x340 mm ,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipe complete all as specified.

S&F in repairs 15mm bore stainless steel chromium plated urinal spreader with pvc connection complete all as speicfied.

S&F in repair 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium road & high density plastic ball screwed for iron pipe & fixed complete all as specified and directed.

S&F in repair grating dome 125 mm dia of stainless steel with or without hole complete all as specified and directed.

S&F in repair PVC cover (lid) for PVC water tank for necessary locking arangments for 500 & 1000 ltr capacity water tanks complete all as specified and directed.

S&F in repairs 150mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate and fixed to steel wooden frame by necessary welding as required complete all as specified.

S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm complete all as specified.

S&F in repairs aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.

S & F in repairs aluminium door strip with bush and rubber gasket suitable for wooden doors to cover gap between door and floor etc complete all as specified and directed by Engr-inCharge.

S&F in repairs IInd class hard wood (teak) beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads from site complete all as specified.

M & L for providing and welding to steel window shutter hinge including removing to old projected type hinge and provided new box type hinge of Mild steel Fe-290 gde E-165 including necessary painting with 2 coats of synthetic enamel paint over of coat of primer including repairing to old window complete all as specified and directed.

S&F light shade Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match including dismantling of old tiling with cement plaster and rubbish off the premises complete all as specified and directed.

S&F glazed coloured ceramic tiles in vertical surface of walls like skirting/ dado etc of size 300X450X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over & including 10mm thick rendering in CM 1:3 on other then fair faces of brick work including dismantling of old tiling with cement plaster and rubbish off the premises complete all as specified and directed.

S&F glazed coloured ceramic tiles in vertical surface of walls like skirting/ dado etc of size 200X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles over & including 10mm thick rendering in CM 1:3 on other then fair faces of brick work including dismantling of old tiling with cement plaster and rubbish off the premises complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match shade of tiles including dismantling of old tiling with cement plaster and rubbish off the premises complete all as specified and directed.

S&F non skid coloured ceramic tiles 7-8mm thick (square or rectingular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over & including 15mm thick screed bed in CM 1:6 including dismantling of old tiling with cement plaster and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-1, using (20mm graded stone aggregates) as in base concrete to floors finished even & smooth without using extra cement all as specified.

M&L for mirror polished machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

M&L for chipping of slab/column/roof/chajjas/roof projection/balconies/staircase etc as directed and removing loose concrete with chisel hammer without much impact on concrete surface, clean the surface by sand blasting using river sand with min 6kg pressure at the nozzle or air blow by applying CICO clean rust remove or equivalent in two coat over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation inhibator coat @ 5Sqm/Ltr with CICO Zincilate-500 or equivalent to reinforcement surface as per manufacturers instructions incl all scaffolding, machinery, tools tackles and men materials and cleaning of debris complete all as specified and as directed by Engr-in-charge.Make CICO clean-O-rust, CICO Zincilate-500 or equivalent of Fosrec/Dr fixit/L&T/STP. Note:-The Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent and Authorised applicator agent shall be approved by the accepting office before execution of work.

M&L for applying bond coat with CICO-latex SBR or equivalent in Fosroc/Dr Fixit/STP/Sika as per manufacturer instructions, after preparing old surface of RCC to receive Polymer modified one component repair mortar or micro concrete. Laying of polymer modified one component repair mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, fixing etc complete all as directed. make CICO latex SBR or equivalent in Fosroc/ Dr Fixit/STP. Note:-The Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent and Authorised applicator agent shall be approved by the accepting office before execution of work.

M&L for preparation the surface and applying 15mm thick in two layer, each layer n.exc. 10mm thick with polymer modified mortar(PMM) on surface of slab/column/roof/chajjas/roof projection/balconies/staircase etc as directed with polymer modified one component repair mortar of PMM Cico Repocem or equivalent in Fosroc/ Dr Fixit/STP. inclusive of all materials, labours, supervision, tools, tackles, transportation, fixing etc complete all as directed.

M&L 10mm thick cement plaster in CM 1:3 mixed with and incl water proofing compound @ 100ml/50Kg of cement or as per manufacturer instructions of CICO-super or equivalent in Fosroc/ Dr Fixit/STP. Note:-The Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent and Authorised applicator agent shall be approved by the accepting office before execution of work.

M&L for 20cm thick precast cement concrete 1:3:6, type C-1 using 20mm graded stone aggregate block masonry with solid block, exc 10 cm in width & set in CM 1:6 including dismantling of old stone/boulders masonary complete all as specified & as directed.

S&F in repair 15 mm bore brass chromium plated wall mixer for mixing hot and cold water along with CP brass caps screwed for fiixing complete all as specified and directed.

S&F in repair 15 mm chromium plated wash basin mixture fancy type, with capstan heads, chromium plated, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm iron pipe and fixed comple all as specified and directed.

S&F in repair 15 mm bore chromium plated kitchen sink mixture fancy type, with capstan heads, chromium plated, screwed down for high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm iron pipe and fixed comple all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.complete all as specified and directed.

S&F in repair PVC(SWR) bends 110 mm bore of any radius complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless sink steel 1mm thick kitchen with plugs, washers and waste pipe , waste coupling, cantilevers brackets, connecting union overall size 915x460mm bowl size 410x330x160mm complete all as specified.

S&F in repairs kitchen plate rack with racks and guard bars made out of stainless steel minimum 1mm thick, over all size 750mm X 600X250mm and assembled with using brass nuts, bolts and washers complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite and round to the edge of stone slab on platform complete all as specified and directed.

M&L for 20 CM thick precast cement comcrete 1:3:6, type C-1 using 20cm graded stone aggregate block masonry with soild block, exc 10cm in width & set in CM 1:6 including dismantling old block masonry complete all as specified and directed.

M&L for 50mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finished even and smooth using extra cement for floor finish complete all as specified and directed

S & f in repairs 5.50mm thick sheet glass corner shelf 300X300mm size in quarter circle shape or rounded at one side with chromium plated railing,mounted on decorative chromium plated bracket assembly set complete all as specified and directed.

National Rewinding Works (BID ID -3130324)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3114349)

M/S Tanisha Traders (BID ID -3130373)