Construction of Multi Purpose Community Hall at Vill Rania Block Rania

Amount

Earth work in excaviation in foundation trenches in ordinary soil (vide classification of soil item A) & disposal of excaviated earth as ovrained to a distance upto 50 mnincluding all lifts, levelling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approve design, building specification & direction of E/ incharge5.1.1

Extra for earth work in hard soil as per specification and direction of engineer incharge(vide classification of item B)5.1.2

Earth work in filling in sub floor trenches and plinth in layersnot exceeding 150 mm thick, well watered, rammed, fully conpared and fine dressed with earth obtained after cutting within lead of 50m and lift of 1.5m all completed as per direction of the E/I( mode of measurement compacted volume).5.1.7

Providing coarse clean sand in filling in foundation trecches or in plinth including rammingamd watering in layers not exceeding 150mm. Thick with all leads and lifrs including cost of all materials, labours, royality and taxes all complete jobs as per building specification and direction of the E/I . ( mode of measurement compacted volume) 5.1.10

Providing degination 75B one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of the E/I.5.6.3

Providing and laying in position cement concrete (1:2:4)of specified grade excluding the cost the cost of centering and shuttering all work up to plinth level. 5.3.1.2

Providing and laying in position reinforced cement concrete of soecified grade excluding the cost the cost of centering and shuttering all work up to plinth level(1:1.5:3)M20 . 5.3.9.1

Providing cement concrete works in walls including attached pilasters butteress plinth and string courses fillets columns pillars piers abutment post and struts etc. above plinth level upto floor five level rxcluding cost of centering shuttering finishing and reinforcement: (1:1.5:3) M20. 5.3.10

Providing reinforcement concrete work in beam ,suspended floors, roofs having slope upto 15 degree landing balcony shelves do.. Do.. As per E/I. (Rcc M20)5.3.11

Providing Tor steelreinforcement as per approved design & drawing.5.5.4

Providing Tor steelreinforcement of 10 mm dia bar as per approved design & drawing.5.5.5(a)

Providing Tor steelreinforcement of 12 mm dia to 20 mm dia bar as per approved design & drawing.5.5.5(b)

Centering including struting , proping etc and removal form for5.3.17 Foundation footing bases for column etc.5.3.17.1

Weather shades,chajja etc.5.3.17.19

Column, piers ,Pillars etc5.3.17.6

Lintel beams ,plinthbeam etc.5.3.17.21

Stairs (excluding landings)etc.5.3.17.7

Suspended floors ,roof, landing balconies etc.5.3.17.20

Providing desination 75B brick work in cement mortar (1:6) in foundaton & plinth with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screning materials, racking out joints to 15mm depth, curing, taxes and royalty all complete as per build specification and direction of E/Incharge.5.2.6

Providing desination 100A brick work with fly ash lime brick (flag) in cement mortar (1:6) in super structure with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screening materials, racking out joints cost of screening materials, racking out joints to 15mm depth, curing, taxes and royality all complete as per build . specification and direction of E/ in charge.5.2.48

Providing desination 112 mm thickreiforced designation 100A brick work with fly ash lime brick in cement mortar (1:4) in super structure with approved quality of clean coarse sand of F.M 2 including providing 10mm th.mortar joints cost of screening materials, racking out joints cost of screening materials, racking out joints to 15mm depth, curing, taxes and royality all complete as per build . specification and direction of E/ in charge.5.2.54

Providing and laying damp-proof course 50 mm thick with cement concrete (1:2:4) . 5.3.5

Supplying fitting and fixing 20 gauge GCI sheet gate fitted on MS angle frame of size 60x60x6mm including cost of fabrication.. Do as per E/i. 5.5.29

Supplying , fitting and fixing M.S grill made of 20 X 6mm. M.S flat/ square bars as per approved design & drawing, properly fibricated with joints contiuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. 5.5.12

Providing and laying Double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS: 15622/ ISO 13006, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete Size of Tile 600 x 600 mm5.6.28

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete..DSR 11.37A

Providing and laying 6 mm precast white glazed tiles in walls over 12 mm cement mortar (1:3)…do… with A grade white tiles. 5.6.23.1

Providing and laying 25 mm. Thick kotah stone tiles in risers of steps , skirting and pillers of approved size , texture and colour laid over 12mm. Thick cement mortar (1:3) and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborundum stone including cost of curing , taxes and royalty all complete as per building specification and direction of E/I.BCD 5.6.20

Providing 12mm. Cement plaster (1:6)l with clean coarse sand of F.M .15. including cost of carriage, screening, curing with all lead and lifts of water,scaffolding, taxes and royalty all complete as per building specifications and direction of the E/I. 5.7.3

Providing 6mm, cement plasters (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of carriage, screening , curing with all lead and lifts of water, scaffolding taxes and royalty all complete as per buiding specifications and diarection of the E/I.5.7.6

Providing 12mm, cement plasters (1:3) with clean coarse sand of F.M 1.5 with floating coat of neat cement in skirting including cost of carriage, screening , curing with all lead and lifts of water, scaffolding taxes and royalty all complete as per buiding specifications and diarection of the E/I.5.6.10

Finishing wall with Acrylic smooth exterior paint of required shade(new work two or more coat applied @ 1.67 litre/10 sqm)DSR 13.46.1

Providing two coats of Oil bound distempring of approved shade and make over a coat of cement primer over new surface do…do… as per E/I.5.8.18

Painting with synthetic enamel paint of approved shade and mnufacture do…do… as per E/I.5.8.41

Painting with synthetic enamel paint of approved shade and mnufacture do…do… as per E/I.5.8.45

Providing 16 mm dia Fan hook.. 5.5.13

Making plith protection 50 mm thick of cement concrete 1:3:6 over 75 mm thick bed of dry brick blast do.. Do as per E/I.5.3.8

Providing 250 mm wide brick drain in cement mortar (1:6) with av. 150 mm clear depth and 250 mm apron including cost of earthwork involved with 75 mm cement concrete (1:4:8) ..do.. 5.10.33

Carriage of materials: Bricks

stone chips

Point wiring in PVC conduit with piano type switch Wiring for light point /call bell point / exhaust fan point with 1.5 sqmmFRPVC insulated coper conductor single core cable in surface / recessed PVC conduit with paino type switch phenolic laminated sheet with suitable size of Msbox and erthing the point with 1.5 sq mm FRPVC insulated copper conductore single core cable etc as required Group C 1.3.3

power plug Wiring in pvc conduit 2x4 sq mm wiring for light /power plug with 2x4 sq mm frpvc insulated copper conductor single core cable for loop earthing as required.1.5

Wiring for circuit /submain wiring alongwith earth wire with the follwing sizes of FRPVC Insulated copper conductor single core cable.1.7 2x1.5 sqmm +1x1.5 sqmm earth wire.1.7.1

2x2.5 sqmm 1x2.5 sqmm earthwire.1.7.2

4x2.5 sqmm+4x2.5sqmm earthwire.1.7.8

4x10 sqmm +2x6 sqmm earthwire1.7.11

Supplying and drawing coaxial TV cable RG-6 Grade 0.7mm solid copper conductor PE insulated shielded with tinned copper braid and protected with PVC. 1.17

S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required .1.21 20 mm PVC coduit.1.21.1

25 mm PVC coduit.1.21.2

Suppling and fixing following moduler type switch / socket on the existing switch box / cover including connection etc. as reqd.1.24 5/6 amps switch1.24.1

15/16 amp oneway switch 1.24.3

5/6 amps 3 pin socket outlet1.24.4

5/16 amps 6 pin socket outlet1.24.5

S/F Moluler type electronic fan regulator1.25.

S/F moduler type blanking plate.1.26

S/F following size /modules G.I. box along with module base and coveretc.1.27 1 or 2 module (78mmx78mmx45mm) for telephone TV outlet.1.27.1

4/5 module(78mmx140mmx50mm) 1.27.2

6 module(78mmx205mmx50mm) 1.27.3

S/F 2 pin 5 amp ceilling rose on the existing junctionbox etc.1.33

s/f brass batten angle holder including connection etc.1.34

Installation testing and commissioning of ceilling fan including wiring the down rods of standards 1.50sqmm frpvc included copper conductor etc.1.44

Installation of exhaust fan upto 450mm sweep in existing opening.1.48

Supplying and fixing 20amp 240v SPN industrial type socket outlet , with 2 pole and earth metal enclosed plug top alongwith 20amps, G- series, SP MCB ,in sheet steel enclosure , on surface or in recess, with chained metal cover for the socket , outlet , and complete with connections , testing and commissioning etc . as requried . (2.18)2.18

Supplying and fixing following ways horizontal type three pole neutral sheet steel MCB distribution board 415 v do…do… as per E/I.2.9.6 8 way (4+24)double door horizontal type.2.9.6

s/f 6 amp to 32 amp rating 240 v 10 kA c curve MCB DB .2.12.1 6/32 amp single pole

40 amp TPN2.12.9

s/f single pole blanketing plate in existing MCB DB2.13

Supplying and fixing following rating double pole 240 v RCCB etc as required.2.16.2 40 amp

Earthing with G.I. earth plate 600mmx600mm x6mm tick including accessories and providing masonary encloser with cover plate.3.4

P/F 25mmx5 mm GI strip on surface etc3.15

P/F 6 SWG dia GI wire on surface or in racess for loop earthing along with existing surface cable as required.3.18

Supplying of XLPE insulated PVC sheated heavy duty armoured electrical cables with aluminium conductor 1100 v.JSR740 4 core 16 sqmm

SITC of following rating recess surface mounted LED round/square stape down light etc.JSR 9.3.4 18/20 w Led Round down light

Bulk head fitting with 9/10 watt LEDJSR M869

SITC of following rating surface monted LED tube lighting fitting suitable for 230 v 50 H single phase supply etc.JSR9.5.1 10/12 W LED Tube light

SITC of 300 mm (12")Exhaust fan for single phase 230 v 50 HZ.JSR M775

Supply installation and testing and commissioning of following size fan blade etc as required.JSR 9.4.1 1200 mm (48") ceilling fan.

Supplying, fitting and fixing viterous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of viterous white glazed earthenware footrest to be fixed in floor 15mm C.I. body brass spindle stop cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and dirction of E/I. 580mm long - With 12.5 liter low level PVC cistern3.2.1

Supplying and fixing 40 mm high white vitreous glazed (European type W.C. pan) with p trap seat and lid, 15 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, parryware/Hindware/with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. 3.2.2(b) with 10 litre Pvc citern

Supplying ,fitting and fixing viterous white glazed earthen ware wash hand basin--do… 3.2.5

Supplying ,fitting and fixing flat back or angular lipped front viterous white glazed earthen ware urinal--do… 3.2.3 Flat back or standard corner (600mmx350mm)

P/F PTMT soap dish holder having length of 138 mm 102 mm wide. height 75 mm with concealed fittings arrangements. 18.65

Providing and fixing c.p. brass long body bib cock of approved quality confirming to standard weight not less than 690 gm. DSR 18.51.1

Providing and fixing C.P. brass bib cock of approved conforming to IS 8931. 15 MM NOMINAL Bore .DSR 18.49.1

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. 18.53.1 15 mm nominal bore

Providing and fixing C.P. EXTENSION NIPPLES 15 mm size with 12" BSP threads of approved quality . 18.75.1

Providing and fixing mirrors of superior glass of approved quality and of required shape and size. DSR 17.32.1

Providing and fixing PTMT Grating of approved quality and of required shape and size. 125 mm nominal dia. With 25 mm waste hole DSR 17.58.1.2

Providing and fixing unplasticised P.V.C connection pipe with PTMT nuts,collar and brush of approved quality and colour. 15 mm nominal bore With 45 cm length . DSR 18.74.2

Providing and fixing 32 mm waste pipe for sink or wash basin including PVC WASTE FITTINGS. DSR 17.28.2.1

Providing and fixing on wall face unplasticised- PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes.. DSR 12.42 12.42.1.1 75mm coupler

12.42.1.2 110mm coupler

12.42.2.1 75 mm pushfit coupler

12.42.2.2 110 mm pushfit coupler

12.42.3.1 75 mm single Tee with door

12.42.3.2 110 mm single Tee with door

12.42.4.1 75 mm single Tee without door

12.42.4.2 110 mm single Tee without door

12.42.5.1 75 mm bend 87.5

12.42.5.2 110 mm bend 87.5

12.42.6.1 75 mm Shoe plain

12.42.6.2 110 mm shoe plain

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings … do… DSR 18.8 Concealed work 18.8.1 15 mm dia.

18.8.2 20 mm dia.

Providing and fixing CPVC pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings … do… DSR 18.9 External work 18.9.3 25 mm dia.

18.9.4 32 mm dia.

18.9.5 40 mm dia.

Supplying labour and materials for construction of inspection chamber with desig. 75 b having internal dimension 600 x450 mm and 250 mm wall thickness..do.. All comp. 3.3.8

Making soak pit 2.5 m dia.,3.0 m dep with 45x45 cm dry brick honey comb…do.. All comp. DSR 19.32.1

Providing and fixing cp brass stop cock of standard design and make…do.. All. DSR 18.52.1

Polythene water storage tank of ISI mark with cover and locking system.. M-079

P/F PTMT towel rail ..do..all comp. 3.1.21 C (i)

P/F c.p towel ring complete with brackets fixed to woolen cleats with cp brass..do.. All comp. DSR 17.72

Providinng and laying of 110 mm dia. Pvc pipe for outlet of water..do.. All comp. DSR 12.41.2

Providinng and laying of 75 mm dia. Pvc pipe for outlet of water..do.. All comp. DSR 12.41.1

Cost of drilling 200mm x165mmx125 mtr dia Deep borewell : Supplying all materials labour, tools & equipments for driling 200/150 dia borewell in any kind of soil/rock by using DTH supper Rig machine and bell hammer technology inclusive of mollisation dermolisation of rig air complete job including of transportation charge up to the site -do-PHED page no-57 Item no-M-1035 From 0.00 m to 50.00m Below GI

From 51.00 m to 220.00m Below GI

Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size dia. DSR 23.3.3

development of tube well in accordance with IS to establish maximum rate do…do.. As per E/I. DSR 23.12

Supplying and fitting MS Cap over 200 mm dia casing pipe all complete job as per direction of E/IDSR 23.13.3

Providing and fixing suitable size threaded mild steel clamp for borewell of 200 mm dia. .. DSR 23.14.3

submersible pump 100 mm dia(with bronz impeller upto 20 stage) :- 1.50 H.P. PG-66/67 M-1055

Supplying fitting and fixing of standard make starter board with arrangement of all necessary including all traxes as per E/I..M-1065 PG-77

S/F/F 3 core 4 sqmm flat copper cable do..do… as per E/I. M-1627

S/F/F lowering 32mm dia G.I. column pipe do..do.. As per E/I. DSR 18.12.4

Add 18 % GST

Add 1% Labour Cess

GREEN PARK (BID ID -694661)