Construction of yoga center and M.R. to the gym building at udayampalayam in ward no. 50 of east zone coimbatore corporation.

Amount

1. Clearing light jungle as per the direction of Departmental officers etc. completed.

2. Scrapping the old damaged plastering surface as per the direction of Departmental officers etc. completed.

3. Removing and Relaying the footpath slab as per the direction of Departmental officers etc. completed.

4. Dismantling the old damaged Brick work in cement mortar as per the direction of Departmental officers etc. completed.

5. Earth work excavation for foundation in all types of soils and sub soilsincluding soft disintegrated rock andsoft rock to the fulldepth as may be directed except in hard rock requiring blasting, including necessary string,strutting,shuttering, bailing or pumping out sub soil water, removal of slush wherever necessary and also including refilling the sides of foundations with excavated soil in lavers of 15 cm. thick, wellrammed and consolidated depositing the surplus earth within the compound in places shown by the departmental officers with all leads and lifts and clearing and leveling the site etc. complete complying with the standard specifications, drawings and as directed by departmental Engineers.

6.Filling with Quarry Rubbish including watering and consolidation including cost and conveyance Complete complying with standardspecifications and as directed by the departmental Engineers.

7. Cement concrete of mix 1:4:8 (one cement fours and and eight couse aggregate) using hard broken granite stone jelly of 40 mmgauge for foundation levelling course, including shuttering, dewatering wherever necessary and laid complete complying with standard specifications and drawings and as directed by the departmental Engineers including all cost curing etc., complete I layers of not more than 15cm thick & conveyance of materials laying curing etc., complete.

8. Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cmx60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed.

9. Supplying and erecting centering for sides soffits including supports and strutting upto 3.29m high for plain surface such as rectangular column top and bottom slabs of boxing, sill, slabs, sun shade etc., in all floors using mild steel slabs of sizes 90cm x 60cm and BG 10 stiffened with welded mild steel angles of size 25X25x3mm for boarding laid over country wood joists of size 10cm X 6.5cm spaced at about 90cm C/C and supported by casurina props of 10cm to 13cm dia spaced at 75cm C/C etc., complete as directed. Sl.No.123 C Part-II

10. Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets of size 90cmx60cm and BG 10 stiffened with welded mild steel angles of size 25mmx25mmx3mm for boarding laid over country wood joinsts of size 10cmx6.50 cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. Sl.No.123

11. Supplying, Fabricating and placing in position mild steel or deformed steel bars for all reinforced cement concrete items of work including cost of steel transporting straightening cutting, bending, cranking binding welding etc. Including cost of binding wire MS.chairs laps to fix the reinforcement in all positions, all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.

12. Reinforced Cement concrete 1:1.5:3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete.

13. Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"x43/8"x2 3/4" including finishing, curing, etc., complete complying with standard specification.

14. plastering the exposed surface of RCC works in cement mortar 1:3 mix 10mm thick such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor as directed by the departmental Engineers.

15. plastering with cement mortar 1:5 mix 12mm thick in all floor as directed by the departmental Engineers.

16. Supply and fixing of mild steel door using all round "L" angle 25 X 25 X 6mm thick, cross bracing 20x6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc.,

17. Supply and fixing of M.S. Gate using all round "L" angle, Patta, M.S. Sheet with necessary locking arrangements including cost and conveyance etc.,

18. Supply and fixing of M.S. Window using all round "L" angle 25 X 25 X 6mm thick, cross bracing 20x6mm M.S.Flat and 18gauge M.S. Sheet with necessary locking arrangements including cost and conveyance etc.,

19. Supply and fixing L" angle, cross bracing, Patta with necessary fittings etc., including priming coat.

20. Roofing with Galvolume sheet Iron corrugated sheet of 0.40mm thick including bolt, nuts and bitumen washer, etc., complete

21. Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rebate for housing the shutter. with frame

22. Supply and fixing of RCC jolly as per the direction of departmental oficers etc. completed.

23. Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification.

24. Flooring finishing with first quality plain ceramaic tiles of all colours of size 305cm x 305cm x 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10m2

25. Daddoing the walls with first quality colour glazed tiles of 150X150X6mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete.

16. Supplying and fixing in position of Indian make white water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position levelling complete with necesary connection as per standard specification.

26. Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

27. Painting with first quality emulsion paint two coats including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

28. Painting new iron work for doors, windows, grills, weld mesh sceens etc., two coats over one coat of primer as per the direction of departmental officer etc., completed.

29. Painting old iron work for doors, windows, grills, weld mesh sceens etc., two coats as per the direction of departmental officer etc., completed.

30. Conveyance of Surplus earth from Work site to city outer 0 to 15 Km distance including loading, unloading, transportion and all labour charges as per the direction of departmental officers etc., completed.

31. Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil)

32. Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting

33. Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

34. Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mm x100mm x 75mm MS switch box with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point

35. Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories in flush with wall with 150mm x 100mm x 75mm MS switch box concealed type with 3mm thick hylum sheet cover for 15A 3 pin flush type non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and rnaking good of the concealed portion for concealed power plug point

36. Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp with CFL

37.Supplying and fixing of position of Indian make white glazed earthwere wash basin 550mm x 400mm with all accessories such as cost Iron brackets, 32mm dia C.P. Waste coupling, Rubber plug and chain, 32mm dia 'B' class, G.I. Waste pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc.

GST add 18 %

K RAMASAMY

A S P AND CO

R KANNAN