CA No GE(H)-56/2022-23 REPAIR / PAINTING AND POLISHING TO CHAIR CB STEEL WITH AND WITHOUT ARMS, REPAIR TO BED PLY TOP, SCHOOL DESK AND REPAIR TO FURNITURE OF MAP ACCN, MH AND ECHS AT HISAR MIL STN UNDER GE HISAR

Amount

Taking out unserviceable seat and providing new seat of required size (as per sample approved by GE) of chair CB steel with arms, fixed with steel screws and washers of appropriate size all as given here under :- Timber : It shall be first class hard wood teak (MP). The size of the rail of frame shall be 50 x 30mm. Cane : The plastic cane shall be 2 to 2.5mm wide white colour half round and 4mm wide plastic cane for boarder closely woven as per Godrej pattern. Finish : Two coats of black synthetic enamel paint over and including a coat of pink primer. Drg No FD-75(M)

All as per item No 1.00 here-in-before but back of chair CB steel with arms. Drg No FD-75(M)

All as per item No 1.00 here-in-before but seat of chair CB steel without arms. Drg No FD-75(M)

All as per item No 1.00 here-in-before but back of chair CB steel without arms. Drg No FD-75(M)

Taking out unserviceable arms of chair CB steel with arms and providing new arm rest of required size made out of 1st class hard wood teak (MP) duly black painted and fixed with steel screws and washers of appropriate sizes complete. Drg No FD-75(M)

Tightening of existing wooden arms rest with new steel screws and washers of appropriate size and painting arm with black paint after cleaning the surfaces by scraping with sand paper complete. Drg No FD-75(M)

Preparation of surfaces by scraping with sand paper and painting with two coat of synthetic enamel spray paint light grey to steel frame of chair CB steel with arms complete. Drg No FD-75(M)

All as per item No 7.00 here-in-before but chair CB steel without arms. Drg No FD-75(M)

Taking out old clits of chair CB steel with arms and without arms and providing new clits under the seat made out of 25 x 3mm thick MS flat of length 75mm welded by gas welding on MS conduit pipe 25mm dia by continuous welding all around the joint complete. Drg No FD-75(M)

Providing hard rubber shoes to chair CB steel with/without arms complete. Drg No FD-75(M)

Providing hard plastic caps to chair CB steel with/without arms complete. Drg No FD-75(M)

Cutting existing defective piece of frame of chair CB steel with/without arms and providing new piece of MS Conduit 20mm dia upto 10 cm long of existing size/bore having wall thickness 1.6 mm by gas welding all around complete. Drg No FD-75(M)

M & L for repairing of Bed Ply wood by replacing the under mentioned UNSV components/parts with new one complete all as directed by Engineer-in-Charge :- Drg No. FD-246

M & L for 12mm thick commercial ply wood BWR grade of existing size duly ISI marked. Drg No. FD-246

M & L for Stiffener of 1st class Hard wood teak (MP) of size 890x60x40mm. Drg No. FD-246

M & L for Long rail of 1st class Hard wood (MP) of size 1980x90x35mm. Drg No. FD-246

Taking out broken/UNSV head board of bed ply wood and S & F new head board including legs made out of 1st class hard wood (teak MP)and soft wood by making arrangement in bed ply wood , head board shall be covered with 4 mm thick ply wood type –I quality teak face (one face) veneered conforming to IS-1328-1982 including teak wood beading alround and applying polish on existing exposed wooden surface upto standard finish complete all as specified and shown on drgs. Drg No. FD-246

All as per Srl Item No 13.04 here-in-before but foot board. Drg No. FD-246

M&L for applying two coats of French polish to all exposed surface except ply wood top including necessary preparation of surface. Drg No. FD-246

Replacement of u/s lock of almirah large steel with new lock of brass six lever with set of duplicate key complete all as per specified in drawing. Drg No FD/E6/MAP/18

Replacement of u/s handle of almirah large steel complete all as per specified in drawing. Drg No FD/E6/MAP/18

Replacement of u/s clamps with bolt and nut of almirah large steel complete all as per specified in drawing. Drg No FD/E6/MAP/18

Repairing of bed ply top hard steel (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg . Drg No. FD/E6/MAP/08(R )

M & L for 12 mm thick commercial ply wood board BWR grade of existing size duly ISI marked. Drg No. FD/E6/MAP/08(R)

M & L for Hard rubber shoe superior quality as per drg. Drg No. FD/E6/MAP/08(R)

M & L for head made of 18mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white and having 6mm thick teak wood half round edging all round the head complete. Drg No. FD/E6/MAP/08(R)

M & L for foot made of 18mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white and having 6mm thick teak wood half round edging all round the foot complete. Drg No. FD/E6/MAP/08(R)

Repairing of teapoy verandah (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg. Drg No. FD/E6/MAP/17

M & L for Top made of 18mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white and having 4 mm thick teak wood half round edging all round the top complete. Drg No. FD/E6/MAP/17

M & L for Hard rubber shoe superior quality as per drg Drg No. FD/E6/MAP/17

Welding in repair not exceeding 10 cm in length of different points in the steel leg to teapoy verandah(MAP) by spot gas welding including conduit pipe (upto 20 cm length) matched with existing where ever required complete. Drg No. FD/E6/MAP/17

M & L for Painting with two coats of synthetic enamel spray paint black colour of teapoy verandah (MAP) as per drg. Drg No. FD/E6/MAP/17

Repairing of table dressing ladies (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg :- Drg No. FD/MAP-II/07

M & L for Mirror 5 mm thick, electro copper plated polished glass sheet fixed with frame of teak wood and back plywood commercial BWR 6 mm thick one side teak face as per drg. Drg No. FD/MAP-II/07

M & L for Top of 18 mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white and 6 mm thick teak wood edging on front side of complete box as per drg. Drg No. FD/MAP-II/07

M & L for Bottom made of 18 mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white both side teak face as per drg. Drg No. FD/MAP-II/07

M & L for Both side 18 mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white and 6 mm thick teak wood eding on bottom side as per drg. Drg No. FD/MAP-II/07

M & L for Back made of 8 mm thick ply wood commercial BWR gde one side teak face as per drg. Drg No. FD/MAP-II/07

Replacement of front side of existing drawer of 18mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white where ever required complete as per drg. Drg No. FD/MAP-II/07

Replacement of existing 25mm dia plastic coated knob. Drg No. FD/MAP-II/07

Repairing of stool dressing (MAP) by replacing the undermentioned u/s components/parts with new ones complete all as per drg and as directed by Engineer-in-Charge :- Drg No. FD/E6/MAP/14

All 04 sides 18mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white and 6 mm thick teak wood eding on top and bottom side complete as per drg. Drg No. FD/E6/MAP/14

Seat made of 50 mm thick, 32 density foam cushion duly upholstered with leatherite cloth of superior quality fixed and including 12 mm thick plywood BWR grade commerical bottom complete as shown on drg. Drg No. FD/E6/MAP/14

Repairing of chair CBA with hand rest by replacing the under mentioned u/s components/parts with new ones complete all as per drg and as directed by Engineer-in-Charge :- Drg No. FD-260

Welding of broken joints with continuous gas welding including proper deeply filling to make smooth finish complete. Drg No. FD-260

Top made of 18 mm thick prelaminated MDF board exterior grade one side teak face veneered and other side balancing white with and including 6mm thick teak wood edging all around the board complete as per drg. Drg No. FD-260

Providing new seat with accessories complete as per drg. Drg No. FD-260

Repairing of chapoy IP folding (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg and as directed by Engineer-in-Charge :- Drg No. FD/388(R )

8 mm thick plywood board BWR gde commercial ISI marked in two pieces fixed with suitable steel screw all as shown drg. Drg No. FD/388(R )

Preparation of old painted steel/iron surfaces and applying one coat of painting with OG synthatic enamel Paint complete. Drg No. FD/388(R )

PVC hard rubber shoe superior quality of suitable size complete. Drg No. FD/388(R )

Repairing of dressing mirror (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg :- Drg No. FD/E6/MAP/16

M & L for Mirror 5 mm thick, electro copper plated polished glass sheet fixed with frame of teak wood and back plywood commercial BWR 6 mm thick one side teak face as per drg. Drg No. FD/E6/MAP/16

Reparing of bed side table (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg and as directed by Engineer-in-Charge :- Drg No FD/MAP/15

Top made of 18 mm thick prelaminated particle board exterior gde both side laminated (one side teak face veneered and other side balancing white) with and including 4 mm thick teak wood edging all around the top complete as per drg. Drg No FD/MAP/15

Back made of 8 mm thick plywood commercial BWR gde one side teak face as per drg. Drg No FD/MAP/15

Sides made of 18 mm thick prelaminated particle board exterior grade both side laminated with screw as per drg. Drg No FD/MAP/15

Drawers made of 12 mm thick plywood commercial BWR gde and including 6 mm thick teak wood beading all as per drg. Drg No FD/MAP/15

Front side of drawers 18 mm thick prelaminated particle board interior grade, both side laminated with & including 4 mm thick teak wood edging all round complete as per drg. Drg No FD/MAP/15

PVC hard rubber shoe superior quality of suitable size complete. Drg No FD/MAP/15

Preparation of old painted steel/iron surfaces and applying one coat of painting of bed side table (MAP) with black synthetic enamel paint complete. Drg No FD/MAP/15

S&F Chrome plated handle superior quality of suitable size complete. Drg No FD/MAP/15

Repairing of desk with sheet (Model -I) size 96x45 cm by replacing the under mentioned u/s components/parts with new ones complete all as per drg :- Drg No FD/09/06

Top made of 18 mm thick prelaminated MDF board exterior gde one side decorated teak veneered and other side balancing white and including 6mm thick teak wood edging all round the top complete. Drg No FD/09/06

Seat made of 18 mm thick prelaminated MDF board exterior gde one side decorated teak veneered and other side balacing white with and including 6mm thick teak wood edging all round the seat complete. Drg No FD/09/06

Back seat made of 18 mm thick prelaminated MDF board exterior gde one side decorated teak veneered and other side balacing white with and including 6mm thick teak wood edging all round the back complete. Drg No FD/09/06

Preparation of old painted steel/iron portion and applying one coat of synthetic enamel spray paint of olive grey / existing colur complete all as per Drg. Drg No FD/09/06

PVC hard rubber shoe superior quality of suitable size complete. Drg No FD/09/06

Repairing of desk with sheet (Model -II) size 110x45 cm by replacing the under mentioned u/s components/parts with new ones complete all as per drg :- Drg No FD/09/06

Top made of 18 mm thick prelaminated MDF board exterior gde one side decorated teak veneered and other side balancing white and including 6mm thick teak wood edging all round the top complete. Drg No FD/09/06

Seat made of 18 mm thick prelaminated MDF board exterior gde one side decorated teak veneered and other side balacing white with and including 6mm thick teak wood edging all round the seat complete. Drg No FD/09/06

Back seat made of 18 mm thick prelaminated MDF board exterior gde one side decorated teak veneered and other side balacing white with and including 6mm thick teak wood edging all round the back complete. Drg No FD/09/06

Preparation of old painted steel/iron portion and applying one coat of synthetic enamel spray paint of olive grey / existing colur complete all as per Drg. Drg No FD/09/06

Repairing of table dining 120x90 cm (MAP) by replacing the under mentioned u/s components/parts with new ones completed all as per drg :- Drg No FD/MAP-II/03

Top made of 18mm thick prelaminated MDF board exterior grade one side decorated teak veneered and other side balancing commercial white and having 6 mm thick teak wood half round edging all round the top complete. Drg No FD/MAP-II/03

Repairing of table dining 150x90 cm (MAP) by replacing the under mentioned u/s components/parts with new ones completed all as per drg :- Drg No FD/MAP-II/03

Top made of 18mm thick prelaminated MDF board exterior grade one side decorated teak veneered and other side balancing commercial white and having 6 mm thick teak wood half round edging all round the top complete. Drg No FD/MAP-II/03

Repairing of table dining 180x90 cm (MAP) by replacing the under mentioned u/s components/parts with new ones completed all as per drg :- Drg No FD/MAP-II/03

Top made of 18mm thick prelaminated MDF board exterior grade one side decorated teak veneered and other side balancing commercial white and having 6mm thick teak wood half round edging all round the top complete. Drg No FD/MAP-II/03

Repairing of chair verandah (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg :- Drg No FD/MAP-II/06

Replacement of stifteners made of MS sheet all as per drg. Drg No FD/MAP-II/06

Welding on broken joints with continuous gas welding including proper deeply filling to make smooth finish complete. Drg No FD/MAP-II/06

Painting with two coat of synthetic enamel spray paint black colour of teapoy verandah (MAP) as per drg. Drg No FD/MAP-II/06

Hard rubber shoe superior quality as per drg. Drg No FD/MAP-II/06

Repairing of TV Trolly (MAP) by replacing the under mentioned u/s components/parts with new ones complete all as per drg :- Drg No FD/E6/MAP/04 (R )

Replacement of top made of 18mm thick prelaminated MDF board exterior grade one side decorated teak veneered and other side balancing commercial white with steel hinges & including 6 mm thick decorative teak wood eding half round all side as per drg. Drg No FD/E6/MAP/04 (R)

Replacement of sides made of 18mm thick prelaminated MDF board exterior grade one side decorated teak veneered and other side balancing commercial white with steel hinges & including 6 mm thick decorative teak wood eding half round all side as per drg. Drg No FD/E6/MAP/04 (R )

Replacement of bottom made of 18mm thick prelaminated MDF board exterior grade one side decorated teak veneered and other side balancing commercial white with steel hinges & including 6 mm thick decorative teak wood eding half round all side as per drg. Drg No FD/E6/MAP/04 (R )

Replacement pf 5.5 mm openable glass shutter with magnetic catcher and brass handle as per drg. Drg No FD/E6/MAP/04 (R )

Replacement of 50mm dia caster wheel as per drg. Drg No FD/E6/MAP/04 (R )

Replacement of catchers as per drg. Drg No FD/E6/MAP/04 (R )

Repairing of table computer (MAP) by replacing the under mentioned unserviceable component/parts with new ones complete all as per drawing .:- Drg No TP & FD/E6/MAP/03

Telescopic channel of approved quality & suitable size to the key board pad of table with suitable size as per existing complete. Drg No TP & FD/E6/MAP/03

Top made out of 18mm thick prelaminated MDF board exterior grade one side decorated teak veneered and other side balancing commercial white with & including 6 mm thick decorative teak wood eding half round all side as per drg. Drg No TP & FD/E6/MAP/03

Repairing of rack shoe (MAP) by replacing the under mentioned unserviceable component/parts with new ones complete all as per drawing :- Drg No FD/E6/MAP/02 (R )

Welding on broken joints with continuous gas welding wherever required. Drg No FD/E6/MAP/02 (R )

Preparation of surfaces by scraping with sand paper and painting with one coat of synthetic enamel spray paint black to steel frame. Drg No FD/E6/MAP/02 (R )

Hard rubber shoe superior quality as per drg. Drg No FD/E6/MAP/02 (R )

Cleat made out of MS flat iron 25 x 6mm of size and shape as shown on drawing duly welded to frame and painted with two coat of black synthetic enamel paint complete. Drg No FD/E6/MAP/02 (R )

KHAZAN SINGH SAWHNEY

Vinayak Distributors

SMS Enterprises

shekhar & company

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD