Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.5 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹24.9 L+₹1.3 L (5.38%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹26.1 L+₹2.4 L (10.3%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹27.4 L+₹3.7 L (15.6%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
22 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Minniebay
Junglighat PO Port Blair
ADDITION ALTERNATION TO REST ROOM FOR SHIPS GALLEY STAFF AT INS UTKROSH UNDER GE MINNIEBAY, PORT BLAIR
2022_MES_541180_1
8167/E8
Open Tender
Civil Works
Item Rate
180 days
GE Minniebay
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE Minniebay
₹48,000
Yes
18 Oct 2022
27 Jul 2022
29 Aug 2022
27 Jul 2022
22 Aug 2022
9 Aug 2022
60 days
Amount
Demolition of precast cement concrete work built in cement mortar including all quoins, arches and pillars complete all as specified and as directed by Engr-in-Charge
Material and Labour for Plain Cement Concrete Type D2 1:4:8 (nominal mix) using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed by Engr-in-Charge.
Material and Labour for reinforced cement concrete 1:1.5:3 (nominal mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and as directed by Engr-in-Charge.
Material and Labour for form work to sides of rough finished concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed by Engineer-in-Charge
Material and Labour for precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
Material and Labour for rendering 10mm thick on fair faces of block masonry / concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge..
Material and Labour for external rendering 5mm thick in cement mortar 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in cement mortar 1:6 over block masonry or concrete surfaces finished even and fair complete all as specified and directed by Engr-in-Charge. Note : Water Proofing Compound shall be measured and paid separately as 'Supply only'
Supply only water proofing compound conforming to IS-2645 1975 complete all as specified and directed by Engr-in-Charge
Supply and Fix aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid including preparation of new surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr-in-Charge.
S & F Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc including fixing of glass, wire mesh, particle boards etc complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge. Note - (i) Weight of necessary Aluminium alloy handles and locking arrangements shall be considered for measurement and payment under this unit rate. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. (ii) Glass panels, prelaminated particle boards, glass & aluminium wire cloth as applicable shall be measured and paid separately as suppy only under relevent item of this schedule
Supply only 5 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and directed by Engr-in-Charge.
Supply only 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge.
Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engr-in-Charge.
M & L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge..
M&L for plain cement concrete 1:5:10 type E2 (nominal mix) using 40mm graded aggregate as for floor surface complete all as specified and directed by Engr-in-Charge.
M&L for reinforced cement concrete 1:2:4 (nominal mix) type B 1 using 20mm graded stone aggregate as in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and directed by Engr-in-Charge.
M&L for form work to sides and soffits of rough finished floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc also splays between floors, and beams,etc complete all as specified and as directed by Engineer in Charge.
M&L for reinforced cement concrete 1:2:4 (nominal mix) type B 1 using 20mm graded stone aggregate in lintel up to 1.5 m clear span, Cills, steps , seismic and other bands complete all as specified and directed by Engr-in-Charge.
Form work to edges of concrete flats, treads, breaks in floors, window cills,concrete railings, openings in concrete walls, floors and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 10cm wide and n.exc 20cm wide with rough finished surfaces complete all as specified and directed by Engr-in-Charge..
M&L for reinforced cement concrete 1:2:4 (nominal mix) type B 1 using 20mm graded stone aggregate in Chajjas complete all as specified and directed by Engr-in-Charge.
M&L for form work to chullah hoods, chajjas,troughs and similar items including edges,etc complete all as specified and as directed by Engineer in Charge.
M&L for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and as directed by Engineer in Charge.
M&L for TMT bars 6 mm to 8 mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire complete all as specified and as directed by Engineer in Charge.
M&L for preparation of new plastered wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer - in -Charge.
M& L for preparing newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of alkali resistant primer all as per manufacturer's instructions complete all as specified and as directed by Engineer in Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding [but not backing] and removing serviceable tiles to the stores and removing rubbish / debris of the premises complete all as specified and as directed by Engineer in Charge.
M & L for 7 mm to 8 mm thick [Square or Rectangular] non skid ceramic tiles, coloured of size exceeding 0.11 Sq.m and not exceeding 0.18 Sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed by Engineer in Charge.
All as per item No 27.00 above but on vertical surfaces including 10mm thick backing coat of dado/skirting in cement mortar 1:3 complete all as specified and as directed by Engineer in Charge.
M&L for glazed ceramic tiles coloured 300x 200x 7 to 8mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:3 complete all as specified and as directed by Engineer in Charge.
M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer in Charge.
Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer in Charge.
M&L for 100mm thick plain cement concrete 1:4:8 , type D2 using 40mm graded aggregate for paving, sub base path etc including formwork, deviding strips and finishing even and rough complete all as specified and as directed by Engineer in Charge.
M & L for coloured chequered cement concrete tiles 300mm x 300mmx 25mm thick, set and jointed neat cement slurry and pointed with coloured or grey cement match with pigment, over and including15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and as directed by Engineer in Charge.
S&F 300x300x9 to 10mm thick (or higher dimension with same thickness) vitrified tiles, heavy duty dura stone, weather proof impact resistant, abrasion resistant tiles of any colour any design as approved including screed bed 15mm thick in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube complete all as specified and as directed by Engineer in Charge.
S&F 30mm thick factory made solid PVC molded door shutter with wood free EPS , (stiles), with 2, 4, or 6 raised panel design with 2mm thick Molded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and as directed by Engineer in Charge.
S&F floor door stopper of length 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed by Engr-in-Charge
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge
S&F in repairs 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new or previously untreated wood surface and applying two coats of synthetic enamel paint over 10cm girth or width over a coat of pink primer complete all as specified and as directed by Engr-in-Charge
M& L for plain cement concrete 1:3:6 type C2 using 40mm grade stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110mm bore PVC (SWR) drain pipes complete all as specified and as directed by Engr-in-Charge
M & L for 110mm PVC (SWR) pipes single socketed of any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engr-in-Charge
S&F PVC (SWR) bends any radius, 110mm bore complete all as specified and as directed by Engr-in-Charge
S&F in repairs 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed to walls, ceilings or in floors etc complete all as specified and as directed by Engr-in-Charge
S&F in repairs 25 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed to walls, ceilings or in floors etc complete all as specified and as directed by Engr-in-Charge
S&F in repairs PTMT gratings 125mm dia complete all as specified and as directed by Engineer-in-Charge
S&F in repairs vitreous china wash basin, white flat back of size 610x480x195mm including fixing taps, waste fittings, union plugs, connecting upto supply pipes, water taps ect providing cement mortar red liead joint cement complete all as specified and as directed complete all as specified and as directed by Engr-in-Charge.
Supply only pillar tap 15mm bore cast copper alloy, with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge
S&F in repairs stop valves cost copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed by Engr-in-Charge.
S&F in repairs PVC connection 15mm size, 600mm long fixed with CP brass nuts complete all as specified and as directed by Engineer-in-Charge
S&F in repairs Bib tap cast copper alloy chromium plated 15mm dia fancy type screwed down for iron pipe or brass ferrile etc complete all as specified and as directed by Engr-in-Charge
S&F in repairs towel rail 600mm long including chromium plated brass screws & wooden / plastic cleats (Minimum weight 190gms) complete all as specified and as directed by Engr-in-Charge
Excavation post holes or similar holes, each not exceeding 0.5 Cum, getting out in hard/ dense soil, Returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed by Engr-in-Charge.
M &L for plain cement concrete 1:2:4 type B-2 using 40 mm graded aggregate for post hole foundations including necessary form work complete all as specified and as directed by Engr-in-Charge
S & F mild steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed by Engr-in-Charge
M&L for Plates (Plain or Chequered) channels, square or notched (Ordinary and counter sunk) forming holes, without any attachment of Fe 290 (Gde E-165) complete all as specified and as directed by Engr-in-Charge
Material and Labour for mild steel work in doors or gates of angle or other section with gusset plates, rails braces, etc complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engr-in-Charge
S&F Mild steel screw bolts 11 mm to 15 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm long but not exc 15 cm long complete all as specified and as directed by Engr-in-Charge
M&L for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge
S&F 0.50mm thick pre painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge
S&F 0.50mm thick pre painted galvalume aluminum zinc coating GI based Plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge
S & F Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed by Engr-in-Charge
Dismantling of stone slabs in, suspended floors, chajjas, landings etc any thickness, jointed in any mortar complete all as specified and as directed by Engr-in-Charge
M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engr-in-Charge
M & L point wiring with 1.5 Sqmm (nominal area) pvc unsheathed multi stranded copper conductor pvc insulated 1100 volt FRLS grade multistranded cable drawn through and including PVC casing capping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,surface, in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches, switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following:-
One light / fan point controlled by one 05 Amps switch complete all as specified and as directed by Engr-in-Charge
One 5 Amps socket on independent board controlled by one way switch complete all as specified and as directed by Engr-in-Charge
One three pin socket 5 Amps on same board complete all as specified and as directed by Engr-in-Charge
All as per item No 66.00 above but with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 2.5 Sqmm conductor to common earth dolly complete all as specified and as directed by Engr-in-Charge
All as per item No 66.00 above but with 4 Sqmm single core multi stranded copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 4.0 Sqmm copper solid conductor to common earth dolly complete all as specified and as directed by Engr-in-Charge
S&F modular socket outlet 2/3 pin, 5 Amps, 240 volts flush type complete all as specified and directed by Engr-in-Charge
S&F modular socket outlet 3 pin 5/15 Amps 240 volts flush type complete all as specified and directed by Engr-in-Charge
S&F modular switches 6 Amps 240 volts flush type complete all as specified and directed by Engr-in-Charge
S&F modular switches 15 Amps 240 volts flush type complete all as specified and directed by Engr-in-Charge
S&F ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark complete all as specified and directed by Engr-in-Charge
Supply and fix LED tube light fitting, 1x20 w, 230v surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. Flicker free, high efficiency and robust industrial batten connecting with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-Charge Make : Cat Pat No BN308C LED20S-6500 L60 PSU WH of Phillips or equivilant makes mentioned in PS.
Supply and fix load line vertical sheet metail enclosure distribution board TPN 12 way IP 54 IK-09 with metal double door suitable for provision of MCCB , 36 KA 160 Amp for housing of MCBs complete complete all as specified and as directed by Engr-in-Charge Make : Legrand Cat part No 5077 53 or equivilant makes mentioned in list of makes Note : Front cover of DB shall be flushed with wall surface
S&F sheet metal distribution board SPN 8 way with category of protection double door type IP-54 IK-09 factory made with tinned copper 200 Amps rated bus bar suitable for MCBs complete all as specified and as directed by Engr-in-Charge Make - Legrand Cat part No-5076 41 or equivilant makes mentioned in list of makes Note : Front cover of DB shall be flushed with wall surface
S&F MCCB adjustable thermal and magnetic, 415 V, 160 Amps, 36kA, 3 pole with thimbles/lugs and nut, bolts complete all as specified and as directed by Engr-in-Charge
S&F MCB TP 40 to 63 Amps, 440 Volts, 10 kA breaking capacity 'C' Curve complete all as specified and directed by Engr-in-Charge.
S&F MCB DP 32 Amps, 415 volts 50 Hz AC supply,10 kA breaking capacity 'C' series complete all as specified and directed by Engr-in-Charge.
S&F MCB SP 6 to 40 Amps, 240 volts 50 Hz AC supply,10 KA C series complete all as specified and directed by Engr-in-Charge.
S&F sheet metal enclosure with socket plug top single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 to 32 Amps complete all as specified and as directed by Engr-in-Charge
Supply & Fix 1200mm sweep ceiling fan, BLDC, 240 volt , Opal . White/brown including rod minimum length 1.5 m and bush , nut bolts , capacitors including drilling on roof and fixed 1 to 1.5 feet rod and connecting bolts etc complete all as specified and as directed by Engr-in-Charge Make : Havells model No Effciencia Neo or equivilant makes mentioned in list of makes
Supply & Fix exhaust fan, 450mm sweep 240 volt , 1400rom,Opal . White/brown including making hole suitable size for fixing and making good to disturbed surface, fixing flap cover including fixing accessories complete all as specified and as directed by Engr-in-Charge
S&F wall mounted fan 450mm sweep, single phase, 230 volts, 50 Hz, fixing on wall with fan clamp/hook including necessary connecting accessories complete all as specified and as directed by Engr-in-Charge
S&F step type 2 module modular fan regulator of 220v, single phase complete all as specified and as directed by Engr-in-Charge
Supply and fix 30w, 240v street light LED fitting, luminous shall be more than 2000 lumen, efficiency not less than 100 lm/Watt , and accessories complete mounted on 40 mm dia light grade GI pipe bracket 1.2 mtr long bent to shape, mounted on wall, connecting complete all as specified and as directed by Engr-in-Charge
S & F 1x33v. 240v, 2'x2' LED light fittings recessed mounted general purpose square shaped luminaire with high transitivity diffuser with profiled & flat diffuser fitted on ceiling connecting with twin core twisted flexible copper conductor of suitable size complete all as specified and as directed by Engr-in-Charge
M&L for sub main wiring complete with 2x1.5 sqmm , single core , multi stranded copper conductor FRLS PVC insulated and sheathed cable 1100 Volts grade , drawn in PVC casing capping in surface / PVC conduit in concealed/surface (as required) along walls roofs etc including 1.5 Sqmm size FRLS PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr-in-Charge Note:- (i) All three wire/cable (phase, neutral and earth) shall be run through in each individual circuit from the DBs (ii) Three run of cables and one run of conduit shall be measured as one unit
All as per item No 88.00 above but 2 x 2.5 Sqmm and 1 x 2.5Sqmm for earth wire complete all as specified and as directed by Engr-in-Charge
All as per item No 88.00 above but 2 x 4 Sqmm and 1 x 4.0 Sqmm for earth wire complete all as specified and as directed by Engr-in-Charge
Supply, laying, testing and commissioning under ground cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed by Engr-in-Charge.
Supply, laying, testing and commissioning under ground cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 Sqmm 4 core complete all as specified and directed by Engr-in-Charge.
Excavation in soft loose soil not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out including forming of bottom for laying cable all as specified and directed by Engineer-in-Charge
Excavation in hard and dense soil Including road cutting etc not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out including forming of bottom for laying cable all as specified and directed by Engineer-in-Charge
Returning filling in including spreading leveling, watering and well ramming in layers n exc 25 cms all as specified and directed by Engineer-in-Charge.
Removal of surplus soil n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtrs above the starting point all as specified and directed by Engineer-in-Charge..
Supply and laying 80mm GI tubing medium grade ISI marked for cable protection complete all as specified and as directed by Engr-in-Charge
M & L for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate for foundation complete all as specified and as directed.
Supply, laying DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 90 mm and inner dia 76 mm polyethylene including couplers, bends, cap etc, with smooth internal and profiled external surface for non pressure under ground cable complete all as specified and as directed by Engr-in-Charge
M/s Pooja Enterprises
bansal construction
BISAKHA PLUMBING WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .