REPAIR TO HARD STANDING FENCING, GATE STORM WATER DRAIN COMPOUND WALL AND OTHER MISC WORK UNDER AGE B/R-II GE (NW) NAVY NAGAR, COLABA, MUMBAI

Amount

Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge

Material & Labour for 100 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed

Material & Labour for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floors, finished the surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal whilst the concrete is green all as directed .

Material and labour, forming construction joints of width 10mm & depth 25mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.

Material and labour, forming contraction joints (dummy joints) of width 10mm & depth 35mm, in cement concrete 100mm thick, priming the surface with primer and filling sealing compound Grade ‘A’ (upto 2mm to 3mm below the top surface of pavement/ hardstanding), including use & waste necessary form work, complete all as specified & directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

Material & Labour 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in subbase to floors all as specified and directed.

Material & Labour for sand cushioning under interlocking paver blocks watering and compact complete all as specified & directed . Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.

Material & labour for Factory made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

Material & labour for Factory made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete all as specified and directed

Material and labour for cement concrete type B-1:2:4 (20 mm graded stone aggregate as in cills, steps, seismic and other simlar bands, plinth courses, string courses parpets and railings upto 60 cm in height, coping etc concrete complete all as specified and directed.

Material & Labour for 20 mm thick screed bed or beding layer for laying floor finishes in CM 1:6 complete all as specified and directed

Material & Labour for prepolished coloured chequerd floor tiles of size 300x300x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed. Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)

Dismantling posts or struts (wood,steel or RCC) any section,in natural ground including taking out embedded portion and making good distrubed ground complete all as specified and directed

Dismantling of fencing wire mesh any type, any size, complete as specifed and directed

Excavating in post holes in soft loose soil (or similar holes ) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble and removing surplus soil all as specified and directed

Supply & fixing mild steel work as in angle iron post and struts in fencing including welding, cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling,bolting or riveting and welding to existing boundary wall fencing post and other similar location etc complete all as specified and directed

Supply & fixing hot dipped galvanised mild steel PVC coated chain link of Size 75mmx75mm, made of 3.5mm dia GI wire, including line wires, or any other approved mesh of any size and dia of GI wire complete all as specified and directed.

Material & Labour for 12 mm dia for mild steel screw bolts (machine made) with hexagonal or square heads at one end and nut and bolts n. exc 5 cm long all as specified and directed

Demolition of brick/ Stone work built in cement mortar including all quoins,arches pillars etc all as specified and directed

Material and labour for Brick work built in cement mortar 1:4 using old side sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed

Material & labour for providing PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation complete all as specified and directed.

Material and labour for extra forming fair finished drain or channel inner girth in cement concrete using extra cement including forms, moulds, mitred/stopper ends etc complete all as specified and directed.

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

Material & labour for 15mm thick rendering in cement mortar(1:4) on fair faces of brick work or concrete surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by Engr-in-charge.

Material & labour for preparation of new plastered surfaces of any description not otherwise described over 10 cm width or grith and applying two coat of synthetic enamel paint over priming panit plaster coat complete all as specified and directed.

Material & labour for preparation of old decorated plastered surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling of MS grill/grating of any description and position etc.

Supply & fixing including fabrication framed work in MS iron such as grills, gratings gate fencing , etc with end of bars shouldered and/ or riveted or bolted with nuts and bolts framework conforming to Fe.290. Gde-E-165 complete all as specified and directed.

Material & Labour for two coat synthetic enamel paint over a coat of red oxide primer on new steel surfaces including prepration of surface of any description over 10 cm width or girth not otherwise all as specified and directed

Material & Labour for Cement concrete type C-2 1:3:6 ( 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directd.

Material & Labour for broken stone or boulders of hard core n exc 63 mm deposited, spreaded and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

Material & Labour for machine cut. pre polished, kota stone slab flooring 22 to 25 mm thick over 15mm thick cement screed bed in CM 1:6 laid & jointed with grey cement slurry & pointed with pigment to match the shade of the slab including rubbing & polishing (Mirror finish) complete all as directed by Engr-in-Charge.

Dismantling old serviceable/unserviceable barbed wire including removing of unserviceable barbed wire from site and serviceable materials kept in safe custody for re-use all as directed

Supply & fixing galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of post including securing and tying at crossing with and provision of galvanised mild steel wire staple or steel pins etc all as specified (Each line wire to be mesured)

Supply & fixing Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to Aluminium doors,windows shutter aluminium wire staples complete all as specified and directed.

Supply & fixing in repairs aluminium serrated finish 20mm dia curtain rod of approved pattern and shade with all fittings as per site requirement such as end block, rounded block, brackets, CP screws, rovel plug, etc. complete all as specified and directed by Engr-in-charge.

Material & Labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified and directed

Material & Labour for extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40 mm to face stones and dressing of face beds and joints, as specified, of random rubble walling uncoursed or brought up to courses

Material & Labour for prepartion of old decorated surfaces of floor including washing and applying one coat of floor guard complete all as specified and direted by EIC Make ; Indico/equivalent all as specified and directed.

Material & labour for Keyed pointing to random or polygonal rubble, uncourse or brought upto courses CM 1:3 all as specified and directed

Removing excavated soil and demolised material exc 5 Km but n.exc 10 Km out side MoD land complete all as specified and directed

Dismantiling of Asbestos/galvalume sheet (Corrugated, semicorrugated, etc.)sheets in roof covering complete all as specified and directed.

Supply and Fixing in position Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as in roof covering/claddig to wall, fixed with self tapping screws, having tensile strength of 550 Mpa yield strength and zinc (galvanised) + Aluminium combined coating of 150 GSM/PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to 7 micron Epoxy primer fixes. RMR 1040 profile width 1125mm all as specified and directed.

Supply and Fixing in position multilayer (min 4 layer) Polycarbonate transparent water prooing roof covering sheets 10 mm thk of grid size 5*5/4/3mm size each, fixed in trusses with suitable aluminium joints (joints shall be covered with minimum 3mm thick aluminium flat/T- Section of minimum width 50mm with polycarbonate covering all complete) and edges shall be covered with aluminium U section as per manufacturers direction completely as specified and directed by Engr in charge ( Note: Aluminium section and joints shall be included in the unit rate quoted)

Dismantling mild steel work as in angles, tubular ,brackets of vally gutter of any description and in any position.

Supply & Fixing 1.25 mm thick steel rolling shutters, with out ball bearing, gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp, safety lever locks mild steel with 4 levers for rolling shutters, ball bearing and staple and one shop coat of primer erected in position as indicated, including taking down all parts complete push pull or manual type all as specified and directed by Engr-in-charge

Material & Labour for preparation of old decorated surfaces of wall including washing and applying one coat of Acrylic emulsion paint exterior grade (100% Acrylic) over a coat of primer including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge.

Material & Labour and fabrication of mild steel work as in posts,purlins,crane gantires, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed .

satyanarayan conastruction (BID ID -3120193)

RAMESH ENTERPRISES (BID ID -3120943)

Garima Construction Co (BID ID -3122569)

RAJENDRA CONSTRUCTION (BID ID -3121612)

Nexus Infratech (BID ID -3121533)

ASHOK CONSTRUCTION (BID ID -3121343)

MUKESH CONSTRUCTION CO (BID ID -3120808)

AGRAWAL ASSOCIATES (BID ID -3119287)

Shetty Construction Co (BID ID -3120351)

RS Enterprises (BID ID -3121594)

Shree Ayyappa Engineering (BID ID -3122256)

Darpan Construction (BID ID -3122454)