REPAIR/MAINT TO GRIT PLASTER RCC REPAIR CHAJJA, INCLUDING MISC B/R ITEMS UNDER AGE B/R -II OF GE (W) AGRA

Amount

Taking down cement plaster on brick or stone walls/RCC ceiling including racking out joints, hacking for key, scrubbing down with wate, including necessary scaffolding etc removing rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L washed stone grit plaster on exterior walls in two layers under layer 12 mm thick cement plaster 1:4 (1 cement 4 coarse sand furrowing the under layer with scratching tool applying cement slurry on the layer @ 3 Kg of cement plaster 1:1/2:2 ( 1 cement 1/2 coarse sand :2 stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern incl. scrcbbing and washing the top layer with brushes and water to expose the stone chippings complete all as specified (payment for providing grooves shall be made separately)complete all as specified and directed by Engr-in-Charge.

M&L for forming groove of uniform size 15mm wide and 15 deep in the top layer of washed stone girthplaster as per approved pattern using wooden battens ,nailed to the under layer including removal of wooden battens repair tothe edges of panes and finishing the groove complete as per specifications and of the Engineer -in -charge.

M & L for rendering cement mortar 10 mm thick in CM 1:3 on concrete surfaces as in ceiling and finished the surface fair and even without using extra cement complete all as specified and directed by Engr-in-Charge.

S&F galvanised welded steel wire fabric as extra reionforcement to RCC members like ceilings, chajja’s, beams, columns parapet walls, waste slab etc including all cutting and waste (wt not exc 4.00 kg/Sqm) complete all as specified and directed.

M&L for applying one coat of epoxy resin (Fair Bond EP) on old concrete surfaces of ceiling and beam chhajja stair case etc @ 0.30 Kg/Sqm, 25mm thick (verage thickness) of cement and sand (Fine grit) ratio 1:3 mixed with chloride free spray concrete lastriiser (spray rete) as per manufacture instruction with guiniting machine presser capacity not less than 5 Kg per Sqcm and finished the surfaces (Except ceiling plaster) complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on concrete, brick/stone surfaces of wall finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge

M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 mixed finished fair and even, complete all as specified and directed by Engr-in-Charge. Note:- WPC shall be measured and paid separately as supply only.

Supply only integral water proofing compound (Liquid) complete all as specified and directed by Engr-in-Charge

M&L for applying two coats of white washing on newly plastered surfaces of ceiling including preparation, complete all as specified and directed by Engr-in-Charge

M&L for applying two coats of white/colour washing on newly plastered surfaces of wall including preparation, complete all as specified and directed by Engr-in-Charge

M&L for applying two coats of oil emulsion distemper over a coat of 1mm thick wall care putty on newly plastered surface, complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of cement based paint over a coat of primer on newly plastered surfaces including preparation, complete all as specified and directed by Engr-in-Charge

M&L two coats of weather proof exterior emulsion (APEX) on walls/chajja fascia including preparation of newly plastered surfaces complete all as specified and directed by Engr-in-Charge

Demolition Cement concrete (Reinforced) in Roofs, floors, beams, staircases, landing, chajjas and similar work, complete all as specified and directed by Engr-in-Charge.

M & L for reinforced cement concrete (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) lintel of door/window, beams and columns in floors, slabs and in shelves etc.

S & F TMT bars 10mm dia and over, cut to length, bent to shape required including cranking bending spirally, hooking ends and binding with mild steel wire not less than 0.9 mm dia (annealed) complete all as specified and directed by Engr-in-Charge

S & F TMT bars of 5mm dia and over upto 10mm dia in stirrups, spacers and binders etc complete all as specified and directed by Engr-in-Charge.

M & L for precast cement concrete 1:2:4, type B1 (using 20mm stone aggregate) in drain/MH cover, window or door cills, lintels, bressumers, steps, chajjas, shelves and similar articles set in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge

M & L for flat formwork to lintel beam, soffits, roof beams, lintels, cantilevers, shelves including supports,overhangs, etc complete all as specified and directed by Engr-in-Charge.

S & F in repair 110 mm bore dia PVC (SWR) pipe, single socketed in any length including rubber ring, fixing with 1mm thick necessary steel sheet with clip/screw vertical wall suface incl necessary CM 1:4 for rain waterpipe, complete all as specified and directed by Engr-in-Charge

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed by the Engineer-in-charge.

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thick, below or above the ground level, complete all as specified and directed by Engr-in-Charge

M&L for 75 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, as in plinth protection, hard standing & sub base of chequered tiles etc.complete all as specified and directed by Engr-in-Charge

M & L for cement concrete colour chequered tiles size 30cm x 30cm x 25mm thick, set, jointed with white cement & pigments and pointed in neat cement slurry including screed bed or bedding layer, over 15 mm thick in CM (1:6) complete all as specified and directed.

S & F steel windows with side hung shutters with using 'Z' steel section without glazing bars including projected box type hinges, tower bolt, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed by Engr-in-Charge

S & F steel windows with side hung shutters using seel section with glazing bars including projected box type hinge, tower bolt, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S & F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed by Engr-in-Charge

Dismantling structural steel work including doors, chajjas frame work, gates etc complete all as specified and directed by Engr-in-Charge.

S&F rolled section angle as in main and cross beams hip and stude angle, frame work, jack rafters, purlins, RCC work suport where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc including steel primer coat, welding, confirming to Fe290 grade E-165 complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall etc, fixed with self tapping screws with suitable washer complete all as specified and directed by Engr-in-Charge

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet for ridges 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with suitable washer complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork/stone work built in cement mortar including all quoins arches pillar etc complete all as specified and directed by Engr-in-Charge.

M&L for brick work using sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete complete all as specified and directed by Engr-in-Charge.

All as per itme No 36 above but except brick (using old bricks) complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each, removal to store complete all as specified and directed by Engr-in-Charge

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm not exc 4.00 Sqm each, removal to store complete all as specified and directed by Engr-in-Charge

S&F framed work such as guard bars, grills etc and similar work including welding/reveting, fixing with screws, nut bolt etc complete all as specified and directed by Engr-in-Charge .

S&F framed work such as hold fast and similar work including welding/reveting, fixing with screws, nut bolt etc complete all as specified and directed by Engr-in-Charge .

S&F framed work of angle or other section in door frame etc and similar work including cutting/welding/reveting etc confirming to Fe-290 Ged E-165 complete all as specified and directed by Engr-in-Charge .

M&L for 30 mm thick Flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed by Engr-in-Charge .

M & L for 35 mm factory made 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated and fixed to frame, complete all as specified and directed.

M & L for 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc complete all as specified and directed by Engr-in-Charge .

S & F mild steel 300 mm, ordinary rat tail rod pattern springs (helical door spring) including roller and roller plate complete all as specified and directed by Engr-in-Charge .

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges,125 mm) complete all as specified and directed by Engr-in-Charge .

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge .

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed by Engr-in-Charge .

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door complete all as specified and directed by Engr-in-Charge

S & F 300 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and directed by Engr-in-Charge.

M & L for two coat of synthetic enamel paint on new steel surfaces over one coat of red oxide zink coated primer including preparation of surfaces complete all as specified and directed by Engr-in-Charge

M & L for two coat of synthetic enamel paint on new wooden surface over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-in-Charge

M&L for washing, rubbing down of old distempered surfaces of walls and applying one coat of oil emulsion distemper on wall by using roller devicecomplete all as specified and directed by Engr-in-Charge

M&L for washing, rubbing down of old decorated plastered or un-plastered surface of wall and applying one coat of cement based paint on old decorated surfaces complete all as specified and directed by Engr-in-Charge.

M&L for washing, rubbing down of old decorated plastered or un-plastered surface of wall and applying one coat of white/colour washcomplete all as specified and directed by Engr-in-Charge

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed block, copping, post hole, benching embedding hold fast etc complete all as specified and directed by Engr-in-Charge

Taking up or down 20 mm bore dia steel tubing and connections, including removal to store/ site complete all as specified and directed by Engr-in-Charge

Taking up or down 15 mm bore dia steel tubing and connections, including removal to store/ site complete all as specified and directed by Engr-in-Charge

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge

S&F 20mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge

Dismantling water tanks incl float valve and removing to store capacity of water tank exc 500 & n exc 1000 litres complete all as specified and directed by Engr-in-Charge.

S & F rotational moulded polyethylene water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of water tank 1000 litres complete all as specified and directed by Engr-in-Charge.

S & F rotational moulded polyethylene water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of water tank 500 litres complete all as specified and directed by Engr-in-Charge.

S & F 20 mm ball brass valves,high pressure (float valve),with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

Demolition floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick screed bed in CM 1:4 as in verticle surface etc complete.

SHRI RADHAYSHYAM JHA (BID ID -3085157)

aman construction & general suppliers (BID ID -3091737)

M/s Sharda Costruction Company (BID ID -3091704)

M/S DEVENDRA KUMAR GUPTA (BID ID -3086079)

M/S OMKAR SINGH YADAV (BID ID -3085717)

sumesh furniture (BID ID -3091373)

Gupta Automobiles (BID ID -3086383)

M/s Kok Singh Sisodia (BID ID -3091625)