Cluster for 1. Construction of Atal Bus Stand (A-Type) (Part-I) 2. Construction of Atal Bus Stand (A-Type) (Part-II) and 3. Construction of Atal Bus Stand (A-Type) (Part-III) at Sanapalla Under Khurda Municipality Block, Khurda

EQP

50014370 Supply & fixing of Rapid Bus Wash Systems -3BT which is a self-propelled, fully automatic controlled wash unit with double side brush rollers with 360 washing solution. Installed on a washing bay of length 20 mtr and width 6 mtr along with necessary R.C.C work with water proofing and tilling complete flooring with slab as per drawing design and construction of foundations, drains, drain sumps, supports of all types, platforms, drain channels.3-brush system made of Imported polyethylene X Profile Bristle brushes (1 horizontal and 2 vertical brushes) in Fully Galvanized Interior and Exterior Frame Structure having Balanced GI pipe roller (automatic/manually operated), Stainless Steel 0-degree Nozzle for 360 washing (front, Rear, Top and Bottom) with inbuilt Dosing Systems for Shampoo, Counter Following Systems ,6 mm Heavy Wire Rope Systems, VFD Control System for smooth operation, Brush load sensor for any proper water pressure flow, Traffic light and Guide Rail for safe movement of machine, Two Vertical hinged brushes with pneumatic shock, dampening systems, Controlled systems – Onboard controlled panel, PLC Control System, Caterpillar 3 Pole Slide on suspension cable and hose handing systems and Switch gear installed on a Guide Rail mounted on the washing bay. The main features are Floor Mo unted Trolley, Energy Chain System, Structure Body painted with High Gloss Automotive Paint, Anti-Tilt and Anti Derailing Mechanism, Space Saving Trolley Design, Semi-Assembled System for quick installation, Trolley Speed of 10 - 15 m/min, PLC Controlled Automatic System, Very sensitive Control system for safety of the vehicle, VFD Controlled Drive, Horizontal Brush, High Penetration IP67 Sensors, Touch Screen Operation, On board Control Panel, Automatic / Manual Model Contour Following Top and Vertical Brushes, High Quality PE bristle Brushes, Stainless Steel / PPE Nozzles, Stainless Steel Piping, Entry Point Under Chassis Wash Equipment, TWE 3BT Equipment Height Extension up-to (4.1m, 4.6m, 5.1m), Exit Side Blowers 30 HP, Backlight Wash Cycle Display, 3 years Spares kit,LED Bay Lights, 1 and 1.5 HP With Gear Box, 2HP Mono Block pump 1no Body mount inbuilt 3phase 420-volt AC supply having IP 55, Brush Pressure Sensing by Latching Units Systems. CONTROL PANEL 1. Quantity : 1 Lot 2. Cable : Cabling for lights & Pump 3. Conduit : to be placed under civil 4. Panel Box : Inclusive of voltmeter, lamp, VSS, MCB etc. 5. Type : Wall Mounted EQUIPMENT DIMENSION 6. LENGTH-13 MTR 7. WIDTH- 2.7 MTR 8. HEIGHT-3.8 MTR E-INTER CONNECTING PIPE WORKS 9. Quantity: 1 Lot 10. MOC: uPVC 11. Schedule 40 12. Valves & Fittings: Upvc/ brass B-WORK UNDER CUSTOMER SCOPE as layout. 1. Power supplies: 415V Three Phase 63 Amp Distribution 2. Water Tank: 5000 Ltr and 1 Inch connection to Machine 3. Hydra: For unloading machine and installation. 4. Space for Equipment’s storage Make: Honda Wash System/ Ginie/Varadom Technologies[N.S.W.I] Ground Floor

FUR

50016637 MATRIX 3 Str Comm Arm, T.White (1145 x 638 x 785) Ground Floor

MIS-CVL-AREAFILLIN

50010877 Supplying, filling or Spreading of filling sand by mechanical means including cost of all labour,material T & P etc. complete as per the direction of Engineer-in-charge. Ground Floor

MIS-CVL-COMPOUNDWA

50000002 Earthwork in disintintigrated rock not requiring blastingto be removed by pickaxe crowbars and depositing materials within 50m. initial lead and 1.5m. initial lift including rough dressing as per direction and specification of the deptt. includig stacking useful materials separately as ordered in foundation. Ground Floor

50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor

50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor