Improvement to Kathali- Balpudi- NH-09 Warkute Agoti No.1 Chandgaon- Road MDR-127 km 0/00 to 16/700 Tal.Indapur Dist.Pune.

Amount

Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete.

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.

Excavation for catch / side water gutter in hard murum strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.

Watering and compacting of embankment formed of materials obtained from the road cutting, within a lead of 50 metre, not less than 97 percent of standard proctor density after laying them in layers of 20 centimetre to 30 centimetre with vibratory roller.

Providing earth work in embankment with approved materials obtained from departmental/ Private land or other sources with all leads including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grade & section, watering and compaction with power roller to achieve not less than 97 percent of standard proctor density etc. complete.

Scarifying the existing granular road surface to a depth of 50 mm by manual means and disposal of scarified material within all lifts and leads upto 1000 metre.

Excavation for roadway in hard murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed complete.

Construction of granular sub-base by providing close graded Material,spreading in uniform layers with Motor Grader/ Paver on prepared surface, mixing by mix in place method with rotavator at Optimum Moisture Content and compacting with vibratory roller to achieve the desired density complete as per clause 401. For Grading I Material.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing to proper grade and camber,applying and brooming requ Indian Standard Institute te type of screening binding materials to fill up the interstices of coarse aggregate,watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment to the required density with Grading-I, using Screening Type-A(13.2 millimetre Aggregate).

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing to proper grade and camber,applying and brooming requ Indian Standard Institute te type of screening binding materials to fill up the interstices of coarse aggregate,watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment to the required density with Grading- II, using Screening Type-B (11.2 millimetre Aggregate).

Providing hard murum side shoulder including supplying hard murum at the road site, including spreading and compacting for sidewidth layers on each side with power roller including artificial watering etc complete.

Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumen with sprayer on dry/hungry Black Top surface at 3.00 kilogram per 10 Square Metre using VG-30 grade bulk bitumen.

Providing and constructing 75 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone metal layers 30 percent crusher broken metal and 70 percent Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade at 2 kilogram per square metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 metric tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete including picking of existing WBM surface.

Providing and constructing 75 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone metal layers 30 percent crusher broken metal and 70 percent Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade at 2 kilogram per square metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 metric tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete including applying tack coat of VG- 30 grade bitumen at the rate of 0.30 Kilogramme per square metre on existing bituminous surface

Providing and Laying Open Graded premix surfacing 20 millimetre thickness composed of 13.2 millimetre to 5.6 millimetre aggregates premixed with bituminous binder transported to site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired compaction,using VG-30 Bitumen,including providing and laying seal coat, sealing voids in a bituminious surface laid to the specified level and cross fall using Type”A”seal coat but excluding prime / tack coat, using Bitumen VG-30 bulk bitumen, drum mix type hot mix plant with Superwisery Control and Data Acquisition using Ordinary Paver, with Vibratory roller.

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900 millimetre out of 2 millimetre aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress:67-2012 Table No 8.3 Supported with back support frame 25 millimetre x 25 millimetre x 3 millimetre, duly painted on back side with grey stove enamel paint and supported on one numberof mild steel angle iron post of size 65 millimetre x 65 millimetre x 6 millimetre, 3.45 metrelong, duly painted with with flat oil paint having alternate black and white bands of 25 centimetre width including Galvanised Iron fixtures etc. fixing the boards in Mix-25 grade concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including transportation etc. complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing of retro-reflectorised informatory sign board Rectangular/ Square in shape having area less than 0.9 square metre made out of 2 millimetre aluminum sheet bonded with white retro reflective sheeting bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/ heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress:67-2012, table number 8.3, supported with back support frame 25 millimetre x 25 millimetre x 3 millimetre, duly painted on back side with two coats of grey stove enamel paint and supported on one number of Mild Steel angle iron post of size 75 millimetre x 75 millimetre x 6 millimetre, 3.5 metre long, firmly fixed to the ground by means of properly designed foundation with Mix-25 grade cement concrete 45 centimetre x 45 centimetre x 60 centimetre, 60 centimetre below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paint having alternate black and white bands of 25 centimetre width including Galvanised Iron fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/ convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/ supplier.

Providing and fixing reinforced cement concrete 5th kilometre stones on major district road including painting ,numbering as per Indian Road Congress design kilometre stone and fixing in standard size cement concrete 1:4:8 block complete.

Providing and fixing reinforced cement concrete 1:2:4 ordinary kilometre stones including painting,numbering as per Indian Road Congress design for major district road kilometre stone and fixing in standard size cement concrete 1:4:8 block complete.

Providing and fixing reinforced cement concrete 200 metre stone as per Indian Road Congress standard including fixing in block of cement concrete 1:4:8,painting lettering complete.

Providing and fixing trap guard stone /boundary stone of standard size and shape including fixing in ground ,white washing complete .

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 metre).

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete.

Providing rubble filling of trap stones in foundation including hand packing, filling gravel/ sand in the voids etc. complete.

Providing and laying in situ / ready mix cement concrete of Mix-10 proportion with trap/ granite in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)) with reversible Drum Type mixer with Superwisery Control and Data Acquisition, with Natural Sand.

Providing cast in situ / ready mix M-15 grade cement concrete for head walls of Cross Drainage work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with Superwisery Control and Data Acquisition, with Natural

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-3 class of 900 millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Providing and laying cement concrete pipe of Indian Standard 458:2003 non pressure-2 class of 600 millimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete.

Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at Optimum Moisture Content as per drawings as per MORTH specification clause 3003.

Maintenance of Water Bound Macadam road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and gravelling complete.

Providing and constructing 75 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone metal layers 30 percent crusher broken metal and 70 percent Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade at 2 kilogram per square metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 metric tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete including applying tack coat of VG- 30 grade bitumen at the rate of 0.30 Kilogramme per square metre on existing bituminous surface

Providing and constructing 50 millimetre thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone metal layers 30 percent crusher broken metal and 70 percent Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade at 1.75 kilogram per square metre, spreading 12 millimetre size chips compacting with three wheel static roller having weight 8 to 10 metric tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete including applying tack coat at the rate of 0.30 kilogram per square metre on existing bitumen surface with VG- 30 grade bitumen.

Patch repair on already filled pot holes with 20 millimetre premix carpet and seal coat as per MORTH specification clause 3004.1 and 3004.2

Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 millimetre thick pre-mix carpet and seal coat as per as per MORTH specification clause 3004.1 and 3004.2

Maintenance of Hume Pipe Culvert by way of clearing, cleaning, erosion repair, repairs to cracks, parapet wall and protection work as per drawing complete.

Maintenance of road signs by way of cleaning and repainting of mandatory/ requlatory/ cautionary/ informatory and place identifications sign board as per drawings etc. complete.

Cutting of branches of trees and shrubs from the roadway or with in Right Of Way including disposal of wood and leaves to suitable location complete.

Trimming of grass, shurbs and weeds from the shoulders/ berms and disposing off the same to suitable locations complete.

Engaging JCB for removing road side trees, branches, land slide materials and for emergency work etc. complete.

Engaging labour for conveying trees, branches, land slide materials during rainy season etc. complete.

Engaging tractor with trailers for conveying trees, branches, land slide materials during rainy season etc. complete.

White washing two coats on parapet walls and white washing and geru lime painting to tree trunks including preparation of surface by cleaning, scraping complete.

J K JAGTAP AND CO

Gangsun India Construction Company