Provn of one Guard room near guard post No.J-86 at HQ 31 Sub Area and Addn/Altn to bldg No.P-1442 for connecting passage to HQ CORPS Annex bldg and Provn of lightening conductors for DSC Guard post and watch tower of FOD at BB Cantt, Srinagar

Amount

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5M wide for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, lying of pipes, cable etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M & L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregsate as in foundation, filling and mass concrete complete all as specified and directed.

Use and waste of form work to sides of concrete foundation, footings, plinth beam etc, vertical or to batter for rough finished surface complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregsate as in foundation, footings, foundation beam, plinth beams and bases of columns, basement slabs, and mass concrete complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam, lintels, cantilevers etc for rough finished surface complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregsateas as in beams, cantilevers , bressummers, lintels over 1.5m clear span complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, landings and similar work (Horizontal or sloping) for rough finished surface n.exc 200 mm thick complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregsateas in pillars, posts, struts, piers, columns complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns for rough finished surface complete all as specified and directed.

M & L for RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregsate as in slabs supported on walls beam and colums in floors, roofs, landind, deck slabs and shelves and the like complete all as specified and directed.

M&L for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

M&L for TMT bar 5 to 10mm dia, as in stirrups, spacers and binders etc, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

Returning filling in including spreading, leveling and well ramming, in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed.

Removing surplus excavated material from site to a distance not exc 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L for brick work sub class B old size brick straight or curved on plan exc 6m mean radius build in CM (1:6), complete all as specified and directed.

M & L for brick work sub class B old size brick straight or curved on plan to any radius built in CM 1 : 4 in half brick thick walls complete all as specified and directed.

M & L for 20mm thick damp proof course in CM 1:2 mixed with water proofing compound to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. Note: WPC shall be measured and paid separately as supply only.

Supply only Integral waterproofing compound complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for broken stone hard core of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type B-1 using 20mm graded crushed stone aggregates as in sub base of floor complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in sub base for floor finishes etc complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20 - 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab laid over and including 15mm thick screed bed in cement mortar 1:4 including rubbing and polishing complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20 - 25 mm thick in riser of steps, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab fixed over and including 10mm thick rendering as in backing layer in cement mortar 1:3 including rubbing and polishing complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square/ rectangular) polished, area of each tiles exc 0.06sqm but not exc 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed or bedding layer 15mm thick in CM (1:6), complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick rendering as in backing layer in CM 1:3, complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Gde Fe 410-W (Gde- E-250) quality-A complete all as specified and as directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, with riveted, bolted or welded attachment of Gde Fe 410-W (Gde- E-250), quality-A complete all as specified and as directed.

S&F 16mm dia mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwewd both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 15cm and n exc 22.5cm long complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour, 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

S&F hangers 6mm dia GI adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. Flat 40 X 3 mm size 60mm long and expansion hold fasterns 12.5mm dia 40mm long complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement building board 600x600mm fixed or laid/inserted to MS frame work with screws complete all as specified and directed.

M&L preparing newly asbestos fibre cement building board surfaces of ceiling and applying three coats of white wash complete as specified and directed.

S&F 20mm thick 2nd class softwood clean sawn boards or planks, width n exc. 25 cm as in eavs board/ wall boarding etc complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to be finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) to be finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 5mm thick in CM (1:3) on ceiling, surface to be finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening preparatory to distempering complete all as specified and directed

M & L for 2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed complete all as specified and directed.

S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereers complete all as specified and directed.

S&F 30mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed.

S&F 30mm thick Glazed and skelton shutters,in window, vintilators open rebeted and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for scuring glass etc; Sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.20 (a) complete all as directed.

S&F Sheet glass ordinary quality 4.00 mm thick, glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded, plain colour PVC "C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as per specification and drawing and as directed.

S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed

S&F stainless steel butt hinges medium weight with stainless steel pins 100mm long complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F 250mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint on new steel surface over one coat red oxide primer of any description not otherwise described exceeding 10cm width or girth, complete all as specified and directed.

M&L 75mm thick, PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection / hard standing etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) water closet, white complete all as specified and directed.

S&F 10 litre capacity PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white (including flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified & directed.

S&F Vitreous China wash basin, size 550 x 400mm, white, flat back, with waste, coupling, chain and plug and porcelean stopper & backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed.

S&F 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe etc complete all as specified and directed.

S & F 15mm dia galvanised tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F 20mm dia galvanised tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F 15 mm dia PVC connecting pipe 450mm long with PTMT nuts of suitable size at both ends complete all as specified and directed.

S&F 15 mm bore, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F brass cromium plated tubuler towel rail 20mm dia inclding brackets complete all as specified and directed.

S&F 125mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F tubular towel rail 20mm dia brass chromium plated 'D' type 60cm long between flanges complete all as specified and directed.

S&F 1000 ltrs capacity rotaional moulded polythelene water storage (Three layer) (cylindrical vertical with closed top) hoisted and fixed in positions all specified in SSR part-I complete all as specified and directed.

S&F 20 mm dia PVC ball cock (PVC float valves) high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and directed.

M&L PVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) pipes 75mm dia bore single sockets, in any length with rubber ring joints, laid in trenches or floors complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75mm dia bore complete all as specified and directed.

M & L for PCC 1 :4: 8 Type D-2, using 40mm graded crushed stone aggregate as in bed to drain pipes of 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F 150mm bore salt glazed ware drain pipe, of Grade 'A' laid in trenches and jointed with cement joint complete all as specified and directed.

M & L for PCC 1 : 2 : 4 type B-1, using 20mm graded crushed stone aggregate as in lintel upto 1.5m clear span, cills, steps, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, bed block etc complete all as specified and directed

M & L for precast RCC 1 : 2 : 4 Type B1, using 20mm graded crushed stone aggregate as in cover slab for manholes, chajjas, mangers, shelves, drain covers of required shape etc. set in CM 1:4 complete with joints to match complete all as specified and directed.

M & L for Cutting into existing manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, lying of pipes, cable etc. n exc 10 sq m on plan and exc 1.5m and n.exc 3m in depth and getting out in any type of soil complete all as specified and directed.

M & L for 40mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in floor finish the surface even and smooth with using extra cement including 3mm thick 38mm wide glass dividing strips complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) to be finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) to be finished even and smooth without using extra cement, complete all as specified and directed.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), skirting etc complete as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including screed bed or bedding layer 15mm thick in CM (1:6), complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado/vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 10mm thick rendering in backing coat in CM (1:3), complete all as specified and directed.

M&L for 22-25mm thick granite stone slab (of any type) machine cut as in skirting/dado, jointed with grey cement slurry and pointed with white cement with admixture or pigment to match the shade of granite stone fixed over and including 10mm thick bedding layers in cement mortar 1:4 complete all as specified and directed.

Dismantling of wall and ceiling boards (fiber pulp, insulation, etc..) or unsulation boards/slabs, any thickness, including cover fillets complete, all as specified and as directed.

S&F aluminiun anodised snap grid ceiling of frame size 600x600mm, main Tee section of size 36.5mmx25mm x1.4 mm thick , cross Tee section of size 23.5mm x26.4 mm x1.4 mm thick, supported at ends all along the wall with aluminium anodised angle of size 40 mm x 25 mm x 2 mm thick and 4mm dia GI suspenders including 4mm thick E board ceiling HPSC fixed to aluminium frame complete as per manufacturer's instructions and as directed.

M&L wooden ceilling (Khatamband) over 12mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling over wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc 13 Sqcm and n.exc 25 sqcm and triangular in section secured with nails or brads anging with roof truss through 6mm dia GI wire as approved by GE including necessary frame work complete all as specified and directed.

M&L Australian wooden pannelling over 12mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall over wooden fillets of 2nd class softwood, wrought rectangular in section of sectional area exc13 & not exc 25 Sqcm plain fillets secured with nails as approved by GE including necessary frame work complete all as specified and directed.

S&F UPVC Window,(unplastisized poly-Vinly Chloride) sliding windows multi-chambered and stiffened framed windows using 88mmx52mm size section all-round as main frams and shutters made with profile section of size 57mmx42mm,including the cost and fixing of 5mm thick clear flot glass in shutters and stainless steel wire mesh shutters shall have well defined welded corner joints without any gaps,fixed the window unit to the existing masonry with anchor fasteners as required. The shutters shall have necessary handles and other associated fittings to the faciliated smooth operation.Both the frames and shutters shall be reinforced with GI proflies of thickness 1.25mmthe entire window is covered with MS powdercoated tube of size 40mm*20mm all-round the frame the frame section,10mm square bars horizontally placed at120mm C/C and suitably placed vertically to avoid buckling and providing structural strength, Minium weight shall be 10kg/Sqm and fixed to UPVC frames with suitable fasteners. The gaps between the window frames and masonry walls shall be filled with silicon or with any other suitable filler materials complete all as specified and directed.

S&F anodised aluminium powder coated (minimum 50 micron thickness) door shutter with frame, glazed with 5.50mm thick tinted glass and frame work shall be not less than 0.8m (section to be used for bottom rail, middle rail and other members shall be of 150x44x3mm, 125x44x3mm and 44x44x3mm respectively) including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size,where required double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in above complete all as specified and as directed.

S&F frameless toughened glass door with sliding shutters (02 Nos) or side hinghed type shutter 12mm thick, factory toughened plain sheet glass, using the stainless steel fitting of polished chrome finish, in each shutter (satin stainless steel finish for handles) including cutting necessary holes and cutouts complete all as specified and as directed by Engr-in-charge. (a) Lock patches with EPC nad strike plate XL-C-4011A:01 No (for openable shutter) (b) Floor spring 90mm opening (EN4) 01 No (for openable shutter) (c ) Top patches XL-C 4012: 01 No (for openable shutter) (d) Bottom patches XL-C 4013: 01 No (for openable shutter) (e) Top pivots XL-C 4014: 01 No (for openable shutter) (f) 450mm long H-Type handles 25mm dia of grade SS-304, XL-C-3003A: 01 No (01 Set for openable shutter)

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down Aluminium partation any size includind glass, partation board etc complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 Sqm but n. exc 4.00 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S & F 25mm dia galvanised tubing medium grade with all fittings laid in trenches complete all as specified and directed.

S&F 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply, laying brick sub class 'B' bricks old size for protection of underground cable laid in trenches, laid flat complete all as specified and directed.

M & L for sand cushining with a layer of fine sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches for cable protection complete all as specified and directed. Note: Measurement shall be taken only after punning down sand cushining.

Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 95sqmm 3.5 core complete all as specified and directed.

Supply, install, test & commission LT outdoor type Busbar, dust & Vermin proof self supporting fabricated out of CRCA steel sheet 1.6mm in inner compartment of suitable size with 450 mm depth with Angle Iron frame (50x50x5mm) support to mount with bolts & nuts including PCC 1:3:6 Type C-2 , cubicle type floor mounting, suitable for 3 phase 4 wire, 415 V, 50 Hz, AC supply, busbar capcity 600 Amps and Incommer MCCB FP, 250 Amp rupturing capacity 50 kA with adjustable Thermal Magnetic based having cable ally on both sides of panel independant bays for incomming & outgoings with openable from front, rear side, duly painted with powder coating and gasket complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead 25x4mm GI earth Strip by means of bolts nuts check nuts & washers of galvanized iron or , procteded by GI medium grade pipe 15 mm bore upto 7.5 mtr including chamber of concrete pit in pcc (1:2:4) type B1 using 20 mm graded stone agg. with 40 mm thick cover of RCC 1:2:4 with XPM (weight not less than 4Kg/SqM) and frame of cover 25 x 25 x 3 mm with lungs 2 Nos and with 6 mm dia MS bar grade to shape, GI light grade 20mm bore pipe for watering at bottom 1.75 Mtr long based on top edge of earth plate salt and charcoal filling test point made out of bornze/gun metal fixing arrangement, funnel, wire mess and earth work in hard/dense soil, returning filling and surplus soil to a distance not exceeding 50 Mtr all as per Plate N0 3 of SSR-2010 Part-I and connected to earthing test point all as specified or indicated including testing on complete all as specified and directed.

M&L for point wiring with 1.5 sqmm, copper conductor FRLS (standard) PVC insulated ISI marked unsheathed in and including PVC conduit medium grade ISI marked not less than 20mm dia with all fittings/accessories and also including PVC ISI marked unsheathed 1.5 sqmm copper multi starandard cable FRLS as earth wireconnected to common earth dolly and MS sunk pressed mild steel terminal box suitable for accessories, junctioin box, other boxes made from 1.6mm thick steel sheet of suitable size for mounting of switches, fan regulatores for following:-

(a) One light/fan point controlled by one way switch 5 Amp

(b) One 3 pin socket outlet, 5 Amps independent

M&L for point wiring with 2.5 sqmm, copper conductor FRLS (standard) PVC insulated ISI marked unsheathed in and including PVC conduit medium grade ISI marked not less than 20mm dia with all fittings/accessories and also including PVC ISI marked unsheathed 2.5 sqmm copper multi starandard cable FRLS as earth wireconnected to common earth dolly and MS sunk pressed mild steel terminal box suitable for accessories, junctioin box, other boxes made from 2mm thick MS sheet complete all as specified and directed.

All as per item No.112 above but One 3 pin socket outlet, 15 Amps, independent, with 4sq. mm size of wire.

S&F single pole and neutral Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amps complete all as specified and directed.

S&F Modular 6 Amps 230 Volts one way switch, 1 module complete as specified and directed.

S&F Modular socket 6 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular 16 Amps 230 Volts one way switch, 1 module complete as specified and directed.

S&F Modular socket 6/16 Amps AC 230 Volts 2/3 pin combined 2 module complete all as specified and as directed.

S&F ceiling rose 3 phase PVC/polycarbonate, isolated body complete all as specified and directed.

S&F White cover plate with frame,1 module complete all as specified and directed

S&F White cover plate with frame, 2 module complete all as specified and directed

S&F White cover plate with frame, 3 module complete all as specified and directed

S&F White cover plate with frame, 4 module complete all as specified and directed

S&F White cover plate with frame, 6 module complete all as specified and directed

S&F White cover plate with frame 8 moudule complete all as specified and directed

S&F lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

S & F stepped type electronic fan regulator, 120 W-2 module type as reqd complete all as specified and directed.

M&L for providing submain wiring with 2x6sqmm and 1x6 sqmm earth wire, FRLS PVC insulated unsheathed copper strandard conductor, single core cable in PVC recessed conduit including PVC conduit medium grade and fittings of size not less than 25 mm dia, wall thickness not less than 1.8 mm complete all specified and directed. Note : Two run of 2 x 6 sqmm and one run 1x6 sqmm and one run of PVC conduite shall be measured as one RM.

S&F light grade galvanised steel tubing of nominal dia 40 mm with fittings laid in, trenches, fixed to wall for protectection etc complete all as specified

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) omplete all as specified and directed.

S&F exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with, blades, and frame and louvers omplete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose omplete all as specified and directed.

S&F LED street light fitting 60 Watt 230 V, AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection omplete all as specified and directed.

S&F Water heater storage type, electric, capacity 25 litres, BEE 5 star rated omplete all as specified and directed.

S&F Sheet metal enclosure TPN factory made IP 43 protection double door DB,s 415 V, Triple pole and neutral 6 way with 200 Amp rated bus bar, complete all as specified and direcred.

M&L for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or 4mm dia GI earth wire , procteded by GI medium grade pipe 15 mm bore upto 7.5 mtr including chamber of concrete pit in pcc (1:2:4) type B1 using 20 mm graded stone agg. with 40 mm thick cover of RCC 1:2:4 with XPM (weight not less than 4Kg/SqM) and frame of cover 25 x 25 x 3 mm with lungs 2 Nos and with 6 mm dia MS bar grade to shape, GI light grade 20mm bore pipe for watering at bottom 1.75 Mtr long based on top edge of earth plate salt and charcoal filling test point made out of bornze/gun metal fixing arrangement, funnel, wire mess and earth work in hard/dense soil, returning filling and surplus soil to a distance not exceeding 50 Mtr all as per Plate N0 3 of SSR-2010 Part-I and connected to earthing test point all as specified or indicated including testing on complete all as specified and directed.

S&F MCB SPN 40 Amp , 240 V , 50 Hz AC made from moulded self extinguishing termostat plastic and suitable for 'C' curve, 10 KA breaking capacity, complete all as directed.

S&F MCB single pole 6 to 32 Amp , 240 V , 50 Hz AC made from moulded self extinguishing termostat plastic and suitable for 'C' curve, 10 KA breaking capacity, complete all as directed.

Supply, laying and testing XLPE insulated, unarmoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 50sqmm 3.5 core in conduit/pipe, in ducts, on wall complete all as specified and directed.

All as per item No.139 above but cross-sectional area 25sqmm 4.0 core all as specified and directed.

M&L for providing submain wiring with 2x10sqmm and 1x10sqmm earth wire, FRLS PVC insulated unsheathed copper strandard conductor, single core cable in PVC recessed conduit including PVC conduit medium grade and fittings of size not less than 25 mm dia, wall thickness not less than 1.8 mm complete all specified and directed. Note : Two run of 2 x 10 sqmm and one run 1x10 sqmm and one run of PVC conduite shall be measured as one RM.

M&L for providing submain wiring with 2x4sqmm and 1x4sqmm earth wire, FRLS PVC insulated unsheathed copper strandard conductor, single core cable in PVC recessed conduit including PVC conduit medium grade and fittings of size not less than 25 mm dia, wall thickness not less than 1.8 mm complete all specified and directed. Note : Two run of 2 x 4sqmm and one run 1x4 sqmm and one run of PVC conduite shall be measured as one RM.

S&F detectors complying with and type certified to EN-45 adderessable type smoke detector photoelectric / optical with base with self built intelligence as per is 11360 complete all as specified and directed.

S&F recessed mounted LED luminaries 36/40 Watt LED 230 Volts panel celesta fittings suitable for armstrong grid ceiling complete all as specified and directed.

S&F recessed mounted LED luminaries 08/10 Watt LED 230 Volts panel celesta fittings suitable for armstrong grid ceiling complete all as specified and directed.

S&F landscape light 9 w including necessary connection and colour as per site requirement with and incl PCC 1:2:4 type B-1 using 20mm graded stone aggregate for foundation complete all as specified and directed.Make : Bajaj cat part No. BGSBL 9 W LED WW or equivalent in Havells / Philips/L&T

S& F single pointed air termination copper rod 12mm dia, 300 mm long on roof of Gurad Posts and Watching towers in various location suly fixed with the help of copper base plate in PCC blocks complete all as specified and directed.

S& F aluminium strip 25mm x 3.15mm alongwith PVC insulators with saddles and fixing screws for fitting the strip complete all as specified and directed.

S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.

M&L for providing pit in PCC 1:2:4 type B-1, using 20mm crushed stone aggregate, with iron frame with angle iron of size 25X25X3mm in frame work with precast RCC 1:2:4 type B-1 cover, reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle for pit of size 400 x 400 x 350mm inner size with CI cover complete all as specified and directed.

S & F 40mm dia galvanised tubing light grade laid in trenches, fixed to wall, under ground for protection of earthing lead from mechanical injury or tempring complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X 6 mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI strip 32 x 6 mm thick as earthing lead by means of steel bolts,nuts, check nuts and washers test points made of GI strip 32 x 6 mm, 10 cm long , medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade ,salt,charcol etc all as shown in electrical plate No. 3 of MES schedule 2009 part-I and connected complete all as specified including testing on completion complete all as specified and directed.

M&L for PCC block of size 0.30m x 0.30m x 0.15m in cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) including necessary suitable formwork and 25 x 3 mm thick angle iron around the PCC block with MS strip for fixing in roof, complete all as specified and directed.

M/S TAJ DIN KHARI

M/S NORTHERN ELECTRICAL WORKS

M/S MAHIR MUNEER

M/S DFA Enterprises

M/S Tajamul Ah Buchh

M/S ATTAR BUILDERS