Laying of Drink water main and Distribution pipeline for newly constructed OHT at Lawyers colony in ward no.40,West Zone.

BT Road Cutting

Earth work Excavation in all solls for Water Supply Laying work Including Refilling the Excavated Earth etc complete

Supply of HDPE Pipes & Specials

200mm Dia HDPE Pipes

200mm Dia HDPE Bend

200mm Dia HDPE Tee

200mm Dia HDPE Fusion Cupler

200x160mm Dia HDPE Reducer

160mm Dia D I HDPE Pipe

160mm Dia D I HDPE Bend

160mm Dia D I HDPE Endcap

160mm Dia D I HDPE Tee

160mm Dia D I HDPE Fusion Coupler

Supply of C.I Sluice vales and D.I Specials

200mm Dia C I Sluice Valve

200mm Dia D I Tailpiece

150mm Dia C I Sluice Valve

150mm Dia D I Tailpiece

Supply of C.I/D.I Pipes & Specials

200mm Dia D I D/F Bend

200mm Dia D I A/F Tee

200 x 150mm Dia D I D/F Taper

150mm Dia D I Pipe 1.50 M

150mm Dia D I Pipe 1.0 M

150mm Dia D I Pipe 2.75 M

150mm Dia D I Pipe 0.5 M

150mm Dia D I D/F Bend

150mm Dia D I D/F Tee

Supply of D.I Specials

Supply of M.S Bolts and Nuts

Supply of R.I Sheets

Supply of Hemp Yarn

Supply and delivery of Open well Submersible pump set conforming to IS 14220/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable 9 for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, 1. Ily Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation.

2000 LPM x 40 M

Labour charges for the erection of submersible pumpset in Lorewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN witches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.

Above 20HP to 30 HP

Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed by the Officers

180mm to 250mm dia (OD) HDPE pipe

125mm to 160mm dia (OD) HDPE pipe

Jointing HDPE Pipes and Specials by butt fusion welding/electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2): 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Officers.

Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to with IS-638(1979) and M.S. bolts and nuts 14 of IS 1364-1 (2002), including cost of jointing materials such as bolt and nuts Rubber insertion and labour charges etc.,

200mm Dia D.I Double Flanged Pipes and specials 185 WD-W0327

150mm Dia D.I Double Flanged Pipes and specials 185 WD-W0327

Towards Labour charges for Fixing of Sluice Valves and specials

Towards Labour charges for Interlinking of newly laid main with existing Main