Loading
Loading…
Loading…
Tender Value
₹1.8 Cr
EMD Value
₹3.7 L
Closing Date
17 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
Above/Below/Par
BUILDING
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the documents shall lead to summarily rejection of the offer.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil Engineering work.
14 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Indian Railways Standard General Conditions of Contract, April 2022 (IRGCC, April 2022) with correction slips issued up to date of inviting tender will be applicable for this tender.
As per Advance Correction Slip No. 5 dated 20.10.2023 "The Original Bank Guarantee should be delivered in person in this office (i.e in Receive and Dispatch Section of DRM office, Engineering Branch, West Central Railway, Jabalpur) before closing date for submission of bids (i.e. excluding the last date of submission of bids).
Three Miscellaneous works under Senior Divisional Engineer (North) Jabalpur Jurisdiction:- Part-1: Construction of RPF out post Building with furniture at Majhgawan. Part-2: Upgradation/modification of RPF Barrack with furniture at Rewa. Part-3: Repairs to staff quarters, Service building & Water Supply arrangements under Assistant Divisional Engineer (North) Satna sub division.
DRMW-JBP-44-2026
DRMW-JBP-44-2026
Open
Works - General
12 Months
Jabalpur, Madhya Pradesh
₹0
₹3.7 L
17 Apr 2026
23 Mar 2026
3 Apr 2026
148 items across 5 schedules · ₹36,11,400.86 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 100 | 205.45 | 20,545 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 80 | 253.95 | 20,316 |
| 3 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 30 | 7,226.95 | 2,16,808.5 |
| 4 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 15 | 6,833.4 | 1,02,501 |
| 5 | Foundations, footings, bases for columns | Sqm | 75 | 307.95 | 23,096.25 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 100 | 307.95 | 30,795 |
| 7 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 200 | 766.55 | 1,53,310 |
| 8 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 150 | 608.35 | 91,252.5 |
| 9 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 120 | 804.25 | 96,510 |
| 10 | Under 20 cm wide | Metre | 50 | 181.9 | 9,095 |
| 11 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 15 | 814.95 | 12,224.25 |
| 12 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | 3 | 18,644.6 | 55,933.8 |
| 13 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 1835 | 89.65 | 1,64,507.75 |
| 14 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 2500 | 89.65 | 2,24,125 |
| 15 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 20 | 8,683.8 | 1,73,676 |
| 16 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 45 | 10,306.2 | 4,63,779 |
| 17 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 15 | 6,882 | 1,03,230 |
| 18 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 40 | 8,288.35 | 3,31,534 |
| 19 | Area of slab over 0.50 sqm | Sqm | 15 | 4,425.35 | 66,380.25 |
| 20 | Granite work | Metre | 50 | 418.85 | 20,942.5 |
| 21 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 90 | 1,063.45 | 95,710.5 |
| 22 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 25 | 2,818.5 | 70,462.5 |
| 23 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 750 | 197.7 | 1,48,275 |
| 24 | 125x64x1.90 mm | Each | 20 | 95.5 | 1,910 |
| 25 | 75x47x1.80 mm | Each | 10 | 64.2 | 642 |
| 26 | 300x16 mm | Each | 20 | 260.3 | 5,206 |
| 27 | 150x10 mm | Each | 12 | 75.55 | 906.6 |
| 28 | 125 mm | Each | 20 | 60.05 | 1,201 |
| 29 | 100 mm | Each | 10 | 53.25 | 532.5 |
| 30 | Twin rubber stopper | Each | 10 | 62.25 | 622.5 |
| 31 | Using flats 30x6mm for diagonal braces and central cross piece | Sqm | 5 | 4,615.15 | 23,075.75 |
| 32 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | Kg | 300 | 146.55 | 43,965 |
| 33 | Hot finished welded type tubes | Kg | 500 | 154.9 | 77,450 |
| 34 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. | Each | 10 | 185.95 | 1,859.5 |
| 35 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 600 | 142.3 | 85,380 |
| 36 | Light shade pigment using white cement | Sqm | 25 | 1,233.05 | 30,826.25 |
| 37 | 25 mm thick | Sqm | 50 | 1,706.6 | 85,330 |
| 38 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 20 | 935.6 | 18,712 |
| 39 | Size of Tile 600 x 600 mm | Sqm | 120 | 1,286.6 | 1,54,392 |
| 40 | 110 mm diameter | Metre | 50 | 319.75 | 15,987.5 |
| 41 | 110 mm bend | Each | 10 | 132 | 1,320 |
| 42 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 50 | 671.55 | 33,577.5 |
| 43 | 1:6 (1 cement: 6 coarse sand) | Sqm | 350 | 294.35 | 1,03,022.5 |
| 44 | 1:4 (1 cement: 4 coarse sand) | Sqm | 350 | 354.5 | 1,24,075 |
| 45 | 1:4 (1 cement: 4 fine sand) | Sqm | 100 | 361.3 | 36,130 |
| 46 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 600 | 214.3 | 1,28,580 |
| 47 | Two or more coats on new work | Sqm | 800 | 137.85 | 1,10,280 |
| 48 | Two or more coats on new work | Sqm | 600 | 131.45 | 78,870 |
| 49 | Orissa pattern W.C Pan of size 580x440 mm | Each | 2 | 3,850.65 | 7,701.3 |
| 50 | Moorum | cum | 30 | 888.3 | 26,649 |
| 51 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 90 | 951 | 85,590 |
| 52 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). | cum | 2 | 8,613.55 | 17,227.1 |
| 53 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 2 | 5,781.35 | 11,562.7 |
| 54 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 3 | 5,540.55 | 16,621.65 |
| 55 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3 | 2,275 | 6,825 |
| 56 | 32 mm dia | Each | 10 | 90.95 | 909.5 |
| 57 | Rectangular shape 453x357 mm | Each | 3 | 1,158.95 | 3,476.85 |
| 58 | Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms | Each | 5 | 325.1 | 1,625.5 |
| 59 | 20 mm nominal dia Pipes | Metre | 30 | 513.75 | 15,412.5 |
| 60 | 25 mm nominal dia Pipes | Metre | 50 | 626.05 | 31,302.5 |
| 61 | 50 mm dia nominal bore | Metre | 75 | 654.2 | 49,065 |
| 62 | 50 mm nominal bore | Each | 2 | 878.25 | 1,756.5 |
| 63 | 25 mm nominal bore | Each | 1 | 399.15 | 399.15 |
| 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 2000 | 9.7 | 19,400 |
| 65 | 15 mm nominal bore | Each | 4 | 434.2 | 1,736.8 |
| 66 | 15 mm nominal bore | Each | 10 | 594.75 | 5,947.5 |
| 67 | 100 mm diameter | Metre | 15 | 375.75 | 5,636.25 |
| 68 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 200 | 433.95 | 86,790 |
| 69 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 250 | 531.8 | 1,32,950 |
| 70 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 45 | 1,019.8 | 45,891 |
| 71 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). | Sqm | 5 | 4,540.7 | 22,703.5 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocument_1.pdf
ATTACHMENT
Specialconditionsofwork3misc_compressed.pdf Special conditions of work
ATTACHMENT
SGCCApril22ACSNo.8to11.pdf
ATTACHMENT
Splcond.LetterofCredit.pdf
ATTACHMENT
RlyBdsletterdated03.6.24JPO-CableCut.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
Listofapprovedbrand.pdf
ATTACHMENT
Specialconditionsofwork3misc_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .