Installation of an additional transformer and re-organization of HT and LT overhead line for New MQ type at Pragati Nagar Colony under Dipka Area.

Amount

Erection/ replacement of damaged 10/ 11/ 13 mtr. long steel tubular poles including excavation of pole pit as per site conditions and grouting by cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) etc (0.38 cum each pole)

Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle (20 mm X 600 mm), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Stringing of ACSR Rabbit conductor, including loading onto departmental vehicle, transporting to site and unloading, laying of conductor along route, stringing and binding on insulators and jumpering.

Supply, laying & stringing of 8 SWG GI wire earth

Fabrication of MS Channel/Angle/Flat for bracket or clamp as per requirement.

Supplying and fixing of MS nut, bolt of different size as required

Supply of GI wire & erection of cradle guarding wire between the span including binding of guard wire.

Supplying and erection of 100 mm X 65 mm pin insulator complete with G.I. Spindle and nuts etc. as required.

Supplying and erection of Shackle insulator (75 mm X 90 mm) with G.I. bolts and nuts and GI straps etc as required

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply & fixing of 11 KV, 400 Amp, 3 Phase Isolator

Note: The estimated cost is excluding CMPF @ 12% and CMPS @ 7%. These statutory payment as applicable shall be reimbursed to the contractor on production of proof of payment limited to the maximum likely number of workmen to be deployed per day is 06 nos.

Total impact of GST for the purpose of CTC

V R ENTERPRISES (BID ID -1150657)