REPAIR/PAINTING AND POLISHING OF BEDS LOCKERS AND OTHER STEEL AND WOODEN FURNITURE AT PMS

Amount

STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD/E6/MAP/08(R) Bed Hard MAP

Pre laminated particle board from the head board frame (Size of Board : 610mm x 330mm)

Pre laminated particle board from the foot board frame (Size of Board : 610mm x 220mm )

Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

PVC Shoes

FD-388(R) Charpoy IP Folding

Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

PVC Shoes

FD/MAP/II/07 Charpoy IP Square Tube

Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

PVC Shoes

FD-1033 Almirah steel large 1/2H x 1/2 Sh

Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing

Handle chromium plated heavy duty

Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate

3 way locking device

Leg made out of MS sheet 1.00mm thick

Hanging rod 15mm dia made out of stainless steel

Shelf of existing size and shape made out of MS sheet 1.00mm thick

FD-1034 Almirah Steel Medium 1/2H x 1/2 Sh

Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing

Handle chromium plated heavy duty

Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate

3 way locking device

Leg made out of MS sheet 1.00mm thick

Hanging rod 15mm dia made out of stainless steel

Shelf of existing size and shape made out of MS sheet 1.00mm thick

FD-1029 Locker Steel/ Locker Bed Side

Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing

Hasp & stappples of size 150 mm long chromium plated

Handle of size 100 mm long 'D' Type chromium plated

Hanging rod made out of 20mm dia chromium plated pipe 500mm long

FD-157(M) Table Bed side steel

Top as per existng shape & size made out of MS sheet 1.00 mm thick of existing size & shape

Door shutter as per existng shape & size made out of M/S sheet 1.00 mm thick

Hard rubber/PVC shoe of existing shape & size

FD/E6/MAP/12 Chair Writing Steel

Seat made out of 12mm thick hot pressed plywood Upholstered with febric and moulded polyurethene foam with PVC lipping all round. (The polyurethene foam shall be 50mm thick and shall be moulded with density 50-55 kg per cubic meter thick and hardness 20 kg on humpden machine)

Back made out of 12mm thick hot pressed plywood Upholstered with febric and moulded polyurethene foam with PVC lipping all round. (The polyurethene foam shall be 50mm thick and shall be moulded with density 50-55 kg per cubic meter thick and hardness 20 kg on humpden machine)

Hand rest made of black integral skin polyurethene with 75-85 shore 'A' Hardness & Reinforced with MS insrest. It shall be scratch and wheather Resistant Size 210mm (Inner) and 230mm (Outer)

FD/E6/MAP/01 Chair Computer

Back made of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra conform with PVC lapping all arounds complete all as specified and directed.

Seat frame of size 510x470x60 and seat made of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam complete all as specified and directed.

Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed

Seat machine with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant

Hydraulic of Chair Computer

Pedestal assy injection moulded in black 30% glass filled nylon. A 10.5mm dia forged bright sinc plated MS castor pin is of press fitted into each prong for holding the castor. It is 600mm pitch centre dia

STEEL/TP FURNITURE Removing/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD-256 Chair Varandah

Remove of old caning from the steel frame of chair varandah and reconditioning the frame by means of welding wherever required to bring it in original shape as per drg.

Supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as apporeved by GE

PVC shoes

FD-255 Teapoy verandah

Top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around Size of particle board shall be 450mm x 300 mm.

PVC shoes

FD-1028 Book Case Steel

Door made out of 1.00mm thick MS Sheet

Sliding Roller with MS Channel 1.25mm thick

Glass 3mm thick

Handle Stainless Steel 100mm

Shelf made out of MS sheet 1.00mm thick. All as shown on drg.

Lock 6 lever with deuplicate key ISI marked with round shape of MS key plate

FD/E6/MAP/02(R) Rack Shoe Steel

3mm dia CR Rod of length 300mm

25mm dia CR Pipe

3mm dia CR Rod of length 700mm

PVC Shoe fixed with MS Screw

FD/E6/MAP/17 Teapoy verandah MAP

Top made of 18mm thick Pre-laminated Particle Board with teak wood beading fixed to M S frame with screw (Self Tapping hardened sheet metal screw)

PVC Shoe

FD/E6/MAP/03 Table Computer

Top made of 18 mm thick Pre-laminated Particle board exterior grade of size 561 x 900 mm

Tray made of 18 mm thick Pre-laminated Particle board exterior grade of existing shape & size

Drawer of existing shape & size, made of 18 mm thick Pre-laminated particle board exterior grade

Key board tray of existing shape & size, made of 18 mm thick Pre-laminated particle board exterior grade

Nylon buffers

WOODEN FURNITURE Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polish to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD-277 Peg Table

Leg made out of 1st class teak Wood seasoned of size 30x50x362mm high

Top rail made out of 1st class hardwood teak of size 20mm x 40mm x380mm

Top made out of 18mm pre laminated particle board one side laminated exterior grade with 4mm teak wood beading all around

PVC shoes

FD/MAP/II/07 Repair to Table Dressing Ladies W/Stool.

Shutter made of ply board

back made of 18mm thick MDF/pre-laminated particle board

Top made out of 18mm thick pre-laminated particle board of size 900x380mm with 4mm thick teak wood beading on front side

Side made out of 18mm thick pre-laminated particle board one side teak face

Side of drawer of size 330x115mm made out of 18mm thick pre-laminated particle board

Back back of drawer of size 315x115x12mm

Bottom of drawer made out of 6mm ply wood of size 315x330mm.

Stainless Steel Handle 50mm

Magnetic Catcher

Top of Stool of existing shape & size made out of plywood 12mm thick BWR IS-303

wheel of Stool

75 mm 40D Cushion covered of Stool

SS Telescopin channel

Mirror frame made out of teak wood well seasoned size 3130x19x25mm

Mirror of size 1220x365x5.5mm thick

6mm th ply for back of mirror

FD-230 Table dressing gents with mirror

Frame of mirror made out of well seasoned teak wood of size 19x25x2320mm

Back ply of mirror 6mm thick of size 380x760mm

Mirror of size 380x760mm, 5.5mm thick

Top of table made out of 1st class teak wood plank of size 900x300x 12mm

Back of table made out of 1st class teak wood plank of size 900x135x12mm

Side of table made out of 1st class teak wood plank of size 300x135x12mm

Bottom of table made out of 1st class teak wood plank of size 900x300x12mm

Front of drawer made out of 1st class teak wood plank well seasoned of size 285x125x12mm

Back of drawer of size 280x115 (Back side) made out of 12mm thick well seasoned 1st class HW(Teak)

Side of drawer and providing the new one of size 280x130 made out of 12mm thick well seasoned 1st class HW(Teak)

Bottom of drawer of 6mm thick BWR plywood of size 290x265

Stainless Steel Handle 50mm

FD/MAP-II/03 Table dining 6 Pers (MAP )

Table top made out of 18/19mm thick prelaminated particle board one side teak veneered with teak wood beading all around

Leg of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws

Long rail of size 1500 x 45 x 90 mm made out of 1st class well seasoned teakwood

Short top rail of size 900 X 45 X 90 MM . made out of 1st class well seasoned teakwood

MS Right angle of size 150 x 30 x 5 mm

PVC Shoes

FD/MAP-II/03 Table dining 4 Pers (MAP )

Table top made out of 18/19mm thick prelaminated particle board one side teak veneered with teak wood beading all around

Leg of size 750x45x90mm made out of 1st class well seasoned teakwood duly fixing PVC rubber shoe at the bottom of legs with mild steel screws

Long rail of size 1200 x 45 x 90 mm made out of 1st class well seasoned teakwood

Short top rail of size 900 X 45 X 90 MM . made out of 1st class well seasoned teakwood

MS Right angle of size 150 x 30 x 5 mm

PVC Shoes

FD-229 Chair Easy

Front Legs made out of 1st class HW well seasoned (Teak)

Front rail of seat frame (Hole should be 12.5mm apart of each other), made out of 1st class HW well seasoned (Teak)

Side Rail, made out of 1st class HW well seasoned (Teak)

Back Rail, made out of 1st class HW well seasoned (Teak)

Arm Rest, made out of 1st class HW well seasoned (Teak)

Supply and weaving with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane

PVC Shoes

FD-246 Bed

head board (both side) frame of bed. Made out of plywood 4mm thick one side teak face (Size of ply : 780mm x 340mm)

foot board (both side) frame of bed. Made out of plywood 4mm thick one side teak face (Size of ply : 780mm x 180mm)

Legs (head) made out of teak wood. Size of leg 60mmx 60mm x 860mm

Legs (foot) made out of teak wood. Size of leg 60mmx 60mm x 500mm

Long rail of size : 35mm x 90mm x 1980mm made out of Teak wood well seasoned

Plywood 12mm thick BWR IS-303 for bed top

FD-241 side board

Leg made out of 1st class teak wood well seasoned

Stainless steel handle 50mm

Plywood 6mm thick BWR for back

Shutters made out of 18mm thick particle board exterior grade one side teak face and other side balancing white

Shelves made out of 18mm thick particle board exterior grade one side teak face and other side balancing white

Drawers made of 1st class hard seasoned teak wood free from knots

Top made out of prelaminated particle board one side teak face and other side commercial/balancing white exterior grade with french polished teak wood edging all around

WOODEN FURNITURE Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polish to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD-278 Teapoy

Top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around Size of particle board shall be 450mm x 300 mm.

Legs of existing shape and size made of 1st class hard seasoned teak wood free from knots

Top rail made of 1st class hard seasoned teak wood free from knots .

Short rail made of 1st class hard seasoned teak wood free from knots .

PVC shoes

FD-275 Table writing

top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around

sides made out of 19mm prelaminated particle board one side teak veneered

shutter made out of 19mm thick prelaminated particle board one side teak veneered bonded with phenol formaldehyde exterior gde

drawers made out of prelaminated particle board & 1st class well seasoned teakwood for sides and front & 6mm thick commercial plywood for bottom of drawers

MS butt hinges 50mm medium wt cold rolled mild steel.

stainless steel handle 50mm

plywood back of table writing & supply & fix new 6mm thick 5 ply plywood commercial BWR gde type BB fixed with 20mm mild steel screws

legs made out of 1st classs well teak wood

long rail made out of 1st class well seasoned teak wood

short rail made out of 1st class well seasoned teak wood

long stiffiner made out of 1st class well seasoned teak wood

Short stiffiner made out of 1st class well seasoned teak wood

PVC shoes

FD-281 Sofa set 4 Seater

Front Leg made out of Teak wood well seasoned

Rear Leg made out of Teak wood well seasoned

Front Rail made out of Teak wood well seasoned

Back Rail made out of Teak wood well seasoned

Arm Rest made out of Teak wood well seasoned

back wdn bearers made out of Teak wood well seasoned

bottom wdn bearers made out of Teak wood well seasoned

100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched

FD-281 Sofa set (3+1+1) Seater

Front Leg made out of Teak wood well seasoned

Rear Leg made out of Teak wood well seasoned

Front Rail (long sofa) made out of Teak wood well seasoned

Back Rail (long sofa) made out of Teak wood well seasoned

Front Rail (single sofa) made out of Teak wood well seasoned

Back Rail (single sofa) made out of Teak wood well seasoned

Arm Rest made out of Teak wood well seasoned

back wdn bearers made out of Teak wood well seasoned

bottom wdn bearers made out of Teak wood well seasoned

100 mm thick x 40 density of size 530x560mm covered with new tapestry cloth duly stitched

FD-274 Table Centre.

leg made out of 1st class teak Wood seasoned of size 60x30x356mm

top long rail made out of 1st class hardwood teak of size 20x50x900mm

top short rail of size 20x50x450mm and shape made out of 1st class HW well seasoned teak

top made out of 18 mm prelaminated particle board

PVC shoes

FD-233 Hat Stand

looking mirror of size 460x300mm 5.5mm thick

Board made out of 19mm thick prelaminated particle board one side teak face

brass peg hook

FD/E6/MAP/09 Bin Linen Multipurpose

legs made out of 1st class teak wood well seasoned

stainless steel handle 50mm

back ply plywood 6mm thick BWR

shutters made out of 18mm thick particle board exterior grade one side teak face and other side balancing white

drawers made of 18mm thick particle board exterior grade

top made out of prelaminated particle board one side teak face and other side balancing white exterior grade with french polished teak wood edging all around

Magnetic Catcher

WOODEN FURNITURE Removing/taking out carefully old unserviceable worn out/components parts of the following wooden furniture without disturbing the other parts and supply and fixing with new parts as specified and as appended below, made to shape & size all as per drawing and as directed and M&L of the same as listed below with new materials/components, made to finishing to receive paint /polish to bringout the new serviceable condition all as specified, directed and shown on drawing:-

FD/E6/MAP/ 16 Mirror Dressing Gents

looking mirror of size 1130x530x5.5 mm thick silver coated

glass shelf of size 5.5mm thick

BAck ply of mirror dressing gents of size 1170mmx540mmx6mm thick 5 ply BWR grade

Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY/BLACK OR AS APPROVED by GE paint both inside and outside (outside only in case of round/square pipe/tube) by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :- (Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE

FD/E6/MAP/08(R) Bed Hard MAP

FD-388(R) Charpoy IP Folding

FD/MAP/II/07 Charpoy IP Square Tube

FD-1033 Almirah steel large 1/2H x 1/2 Sh

FD-1034 Almirah Steel Medium 1/2H x 1/2 Sh

FD-1029 Locker Steel/ Locker Bed Side

FD-157(M) Table Bed side steel

FD/E6/MAP/12 Chair Writing Steel

FD/E6/MAP/01 Chair Computer

FD-256 Chair Varandah

FD-255 Teapoy verandah

FD-1028 Book Case Steel

FD/E6/MAP/02(R) Rack Shoe Steel

FD/E6/MAP/17 Teapoy verandah MAP

FD/E6/MAP/03 Table Computer

Material and Labour for Complete removal of total existing painting/polish and applying two coats of high gloss polyurethane enamel paint (Nerolac:Wonder Wood Coatings 1K PU Glossy/ Asian Paints:Wood Finishes Wood Tech Melamyne Glossy/ J&N Paints:Brolac Hi Gloss Polyurethane Enamel/ Berger Paints: Wood Finishes Imperia Luxuary Polyurathene High Gloss)by spray painting method over and including a coat of pink primer and prepration of surfaces Complete all as specified and as directed for the following furnitures :-

FD-277 Peg Table

FD/MAP/II/07 Table Dressing Ladies W/Stool.

FD-230 Table dressing gents with mirror

FD/MAP-II/03 Table dining 6 Pers (MAP )

FD/MAP-II/03 Table dining 4 Pers (MAP )

FD-229 chair Easy

FD-246 Bed

FD-241 side board

FD-278 Teapoy

FD-275 Table writing

FD-281 Sofa set 4 Seater

FD-281 Sofa set (3+1+1) Seater

FD-274 Table Centre.

FD-233 Hat Stand

FD/E6/MAP/09 Bin Linen Multipurpose

FD/E6/MAP/ 16 Mirror Dressing Gents

FD/374 Repair of Stool dressing

Supply of new cusions 75mm thick x 40 density of size 450x380mm covered with new tapestry cloth duly stiched Make: Kurlon/Sleep well

Removing of exisitng bottom frame and S&F new bottom frame of existing shape & size made out well seasoned teak wood

Preparation of surface by remove of existing polising mark scratches from all exposed wooden surface to make clean and smoth with required grade of sand paper and finish with polish to bring the surface to required glossy finish and as directed by Engr-in-Charge

ANSH CONSTRUCTION (BID ID -3256012)

UNIQUE ENTERPRISE (BID ID -3255947)