SPL REPAIR TO BLDG NO P 17 PER LINE ONLY FOR TOILET BLOCK OF 323 FD HOSPITAL AND PROVN OF PVC WATER STORAGE TANK IN BLDG NO T 112 T 113 OF HQ 23 ARTY BDE CAMP AT DIPATOLI MIL STN

Amount

Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed.

Taking down cement plaster on brick wall or concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from frame) area n.exc 1.50 Sqm each complete including removing from site complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from frame) area exc 1.5 sqm but n.exc 4.0 Sqm each complete including removing from site complete all as specified and as directed.

Taking up or down steel tubing and connection of 15 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connection of 20 mm bore complete all as specified and as directed.

Dismantling of wall or floor tilling including cement mortar bedding complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:6) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC on wall finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid seperetly.

M&L for 10 mm thick cement plaster in cement mortar (1:3) as in ceiling, surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repair for 10 ltrs capacity flushing cistern PVC low level valveless, syphonic action type flushing cistern white with inlet, ball valve, float and handle with and including CI brackets and 32 mm flush pipe of polyethylene complete all as specified and as directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions complete all as specified in SSR Part-I, with and including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

Disconnecting existing tank setting aside lowering if required for repairs, cleaning etc. of capacity exc 250 but n. exc 500 ltr and hoisting if required reconnecting and refixng in position complete all as specified and as directed. Note:- Cleaning and repairing etc shall be measured and paid seperately.

S & F in repair for PVC connection pipe of 15 mm dia and 45 cm long to WHB and flushing cistern complete all as specified and as directed.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket, elbow, nipple, union etc complete all as directed at site for 15 mm bore complete all as specified and as directed.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket, elbow, nipple, union etc complete all as directed at site for 20 mm bore complete all as specified and as directed.

S&F in repair 15mm dia angle stop valves cast copper alloy, fancy type, chromium plated complete all as specified and directed

S&F in repair 20mm bore stop valves cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and as directed.

S & F in repair, 15mm bore bib taps cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S&F powder coated aluminium ventilator louver type with frame, aluminium section weighting 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener, with and including 5 mm thick figured glass strips etc complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing including 3 Nos but hings 100 mm long for each door complete all as specified and as directed.

S & F butt hinges extruded aluminum alloy with galvanized mild steel pin anodized 100mm type B21 complete all as specified and as directed.

S&F 150 mm long aluminum anodized barrel tower bolt extruded section complete all as specified and as directed.

S&F aluminum handles cast type anodized 150 mm long complete all as specified and as directed.

S&F aluminium alloy anodized sliding door bolt 250mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed.

S&F in repairs for shower rose chromium plated with or without swivel joints 100 mm dia complete all as specified and as directed.

S&F in repairs for pillar tap of 15mm dia bore pipe, fancy type cast copper alloy with capstan head chromium plated with or without lettered “hot or cold” with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and as directed.

S&F in repair vitrious china wash basin, oval type size 550mm x 400 mm including waste, chain & plug and poreclain stopper complete including cutting for fixing and 32mm dia waste fitting brass chromium plated for WHB complete all as specified and as directed.

M&L for applying three coats of white wash on newly plastered surfaces on wall after necessary preparation of the surface complete all as specified and as directed.

M & L for applying three coats of white wash on newly plastered surfaces as in ceilings after necessary preparation of the surface, complete all as specified and as directed.

M&L for preparation of old decorated surface of walls by brooming down and wire brushing etc and applying one coat of white wash on wall complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash to ceiling complete all as specified and as directed.

M&L for preparing the new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed.

M&L for preparing the old surfaces by complete removal of existing treatment and applying two coats of cement based paint on walls complete all as specified and as directed.

S&F glazed ceramic tiles in vertical surface (450x300)mm x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed 10 mm thick in cement mortar (1:4) complete all as specified and as directed.

M&L for joint free non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour with and including over 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

S&F granite of any type tiles 20mm thick in steps, cooking platforms, and like with and including over 15mm thick screed bed in CM (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of old stone slab complete all as specified and as directed.

M&L for 25 mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in bedding of tiles/Kota stone complete all as specified and as directed.

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified and as directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm bore of any radius complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm bore of any radius complete all as specified and as directed.

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement complete all as specified and as directed.

S&F vitreous china squatting pan ORRISA Pattern of size (580x 440)mm white with integral foot rest complete (excluding cistern and flush pipe) with provn of lime concrete including backing joints complete all as specified and as directed.

M&L for repair and rendering 10mm thick in CM (1:3) on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of visible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate including necessary scafolding work for double/single storey bldgs complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 using 20mm graded aggregate as in Chhajja, slabs, shelves etc including necessary formwork complete all as specified and as directed.

M & L for mild steel TMT bars upto 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6), type C-2 using 40 mm graded stone aggregate as in plinth protection and path complete all as specified and as directed.

M&L for coloured glazed chequered cement concrete tiles with grey cement and no pigment of size (30cm x 30 cm) x 25mm thick with and including over 15mm thick screed bed in CM (1:6), set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall built in CM (1:4) complete all as specified and as directed.

M&L for brick work using sub class 'B' bricks straight of curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L 50mm thick cement concrete type B-1, (1:2:4) (using 20 mm graded stone aggregates as in sunken portion floor using water proofing compound complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

M&L 10mm thick renderning on fair faces of brick work or concrete surfaces in CM (1:3) mixed with water proofing compound complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid seperately.

M&L cement concrete type (1:5:10) type E2 using 40mm graded brick aggregates as in filling in sunken portion complete all as specified and as directed.

M&L for hot blown bitumen 85/25 two coats on concrete/plastered surface at the rate of 1.2 kg/sqm per coat complete all as specified and as directed.

M&L for polythene film black 200 micron laid in floors/wall etc complete all as specified and as directed.

S&F GI tubing 32mm bore light grade with all necessary fittings complete all as specified and as directed.

M&L precast RCC (1:2:4) type B-1 using 20mm graded aggregate as in manhole cover/ shelves/ Chhajja etc complete all as specified and as directed.

Excavation in trenches not exc 1.5 mtr wide and not exc. 1.5 mtr deep for foundation or laying of cable as in soft/loose soil & getting out complete all as specified and as directed.

M&L PCC (1:3:6) type C2 using 40 mm graded stone aggregates for concrete bed to drain pipes including, packing under and haunding against the sides of pipe, after they tested for 150 mm dia pipe complete all as specified and as directed.

M&L for salt-glazed stoneware 150 mm dia drain pipes laid in trenchess and jointed complete all as specified and as directed.

Returning, filling in trenches including spreading, leveling and well ramming with water complete n.exc 25 cm thick in each layer in soft/loose soil complete all as specified and as directed.

Removing exavated soil n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified and as directed.

S&F in repair vitreous china bowl urinal flat back, size of (430 x 370 x 340) mm (minimum), white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings but excluding frame set in cement mortar (1:4) complete all as specified and as directed.

M&L cement concrete type (1:5:10) type E2 using 40mm graded stone aggregates as in mass concrete and foundation complete all as specified and as directed.

M&L for brick work using sub class 'B' bricks straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for RCC (1:1.5:3) type A-1 using 20mm graded aggregate as in slab supported on wall, beams and columns complete all as specified and as directed.

M&L for formwork flat to soffits of suspended slabs such as roof slabs, floor slab n exc 200mm thick in rough finished surfaces etc complete all as specified and as directed.

M&L for formwork to edges of concrete exc 10cm but n exc 20cm in rough finished surfaces etc complete all as specified and as directed.

S&F 5000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions complete all as specified in SSR Part-I, with and including 25 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F steel tubing and connection tubing in new or old position to walls, ceiling, floors etc including all fitting as socket, elbow, nipple, union etc complete all as directed at site for 25 mm bore complete all as specified and as directed.

S&F 25mm bore gun metal gate valve screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and as directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc, removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and as directed.

Taking down carefully copper/aluminium submain wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors, roofs etc complete all as specified and as directed.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and as directed.

M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper multi stranded conductor in and including concealed PVCconduit of size 20/25mm ISI marked inclusive of tees, bend, elbows etc upto and including sunk in anodized pressed steel box for housing switch, socket etc with white laminated 3 mm thick sheet cover of suitable size complete including PVC insulated multi stranded copper conductor 1.5 sqmm as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster for One light /Fan point controlled by one one way switch complete all as specified and as directed.

Description all as per ser item No . 84 here-in-before but for one 3pin socket out let 5 Amps on the same board complete all as specified and as directed.

Description all as per Srl items No. 84 here-in-before but for point wiring with 2.5 sqmm for 15 Amp socket out let with 2 .5 sqmm earth continuity complete all as specified and as directed.

S&F switch piano type single pole 5 amp 230 v complete all as specified and as directed.

S&F socket outlet 2 in 1, 5 pin, 5 amp complete all as specified and as directed.

S&F switch piano type single pole 15 amp 230 v complete all as specified and as directed.

S&F socket outlet 2 in 1, 6 pin, 5 and 15 amp complete all as specified and as directed.

S&F ceiling rose surface type bakelite (65x50) mm three terminals complete all as specified and directed at site.

M&L for lamp holder, PVC /Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

S&F LED tube light fitting 1x18/20 watt 230 Volt housing extruded aluminium heat sink, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make:- Havells cat part No. LHEXBYPNIN1W020 or equivalent make as per list of makes.

S&F 10 watt LED light with and including 2/3 core flexible copper wire with flexible pipe from ceiling rose to light fittings complete all as specified and as directed. Make:- Havells Cat Part No. LHEXBTP7IN1W009 or equivalent as per list of makes.

S&F MCB distribution board double door with epoxy power coating and IP 43 & IK 09 protection surface/concealed mounting TPN 4 way, 440 volts, and suitble size of 02 Nos cable glands, dust and vermin proof suitable for incorporation of MCCB and MCB's and making all necessary connections complete all as specified and as directed.

S&F MCCB 63 Amps, 415 V, 16KA 4 pole with thimbles/lugs and nut, bolts complete all as specified and as directed.

S&F MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and as directed.

S&F MCB DB SPN 6 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces including fixing material/accessories complete all as specified and as directed.

S&F MCB SP 63 Amps, 240 volts 'C' Series 10 KA complete all as specified and as directed.

S&F MCB SP 6 to 32 Amps 240 volts 'C' Series 10 KA complete all as specified and as directed.

S&F MCB DP 40 Amps, 240 volt 'C' series 10 KA complete all as specified and as directed.

M &L for GI earthing complete with GI earth plate electrode (60cm x 60cm) x6 mm thick buried directly in ground verticvally to size of ditch not less than (0.90 m x 0.90 m) x 2.25 mtr below ground level with top edge of the plate at a depth not less than 1.5 mtr below ground level, earth plate connected to galvanised iron strip of size 25 mm x 4 mm, 7.5 mtr long by means of brazing nuts, bolts, check nuts, & washers, testing of completion drawn in earth lead protection pipe light gade GI of size 15 mm dia by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSR Part - I connected to earthing lead with main switch/main control board, filling with charcoal dust, and common salt, including necessary excavation and earth work in any type of soil, perforated watering pipe, funnel with wire mesh, earth lead protection pipe light grade PCC chamber (1:3:6) type C1 (for even finish on both the faces) and RCC cover (1:2:4) type B1, (using 20mm graded stone aggregates) (450 x450)mm x 50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod complete all as specified and as directed and testing on completion and connected to equipment with lugs and screw nuts etc all as specified and directed at site.

Supplying, laying in trench/on walls with new saddles & clamps etc (as per site requirement), jointing, testing and commissioning with new XLPE insulated, armoured, heavy duty, PVC sheathed electric cable with aluminium conductor,1100 volts grade cross sectional area 25 sqmm 4 core connected with aluminium lugs connected by cramping tools complete all as specified and as directed.

M&L for sand filling in cable trenches for cable protection with clean dry sand unwashed including gently punning complete all as specified and as directed.

M&L for bricks sub class 'B' kiln burnt, well burnt, laid as in trenches/cable cover/protection, complete all as specified and as directed.

Supplying and laying under roads, hard surface, under culverts along poles light grade GI pipe of 40 mm bore dia including all fittings such as elbow, socket etc for cable protection complete all as specified and directed.

M&L for submain complete with 2x4.0 sqmm, single core, multi stranded copper conductor FR PVC insulated and sheathed cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 4.0 sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

M&L for trenchless boring of holes under road/hard standing or any other situation by manual mean for passing GI pipe 40mm bore grade and making good both the ends complete all as specified and as directed. Note: - Cost of GI pipe will be paid seperately.

S&F metallic ventilating air fan single phase 300 mm sweep complete with louvers shutter with and including making of hole in stone/ brick masonary wall, making good with cement plastering (1:4), suitable size fan base after cutting of brick/stone wall complete all as specified and as directed. Make:- Ventil Air - DB of Havells or equivalent as per list of makes.

S&F in replacement LED street light fitting 40/45 Watt in aluminium pressure die cast housing with toughened glass cover ( IP 66 protection) luminaire with high power LED as light source including suitable size of GI brackets and nut, bolt, washer etc complete all as specified and as directed. Make:- Havells Cat Part No. ENDUEA Pearl Neo or equivalent of make Crompton or Jaguar.

S&F blanking plates for covering of MCCB DB open space complete all as specified and directed.

S&F LED lamps 15 Watt capacity suitable for batten holder complete all as specified and as directed.

M/S ALLIED MACHINERIES AND ENGINEERS

M/s R R MUKHERJEE & CO

M/S ARCHANA ENTERPRISES

M/s Kamleshwar Singh

Delhi Enterprises