Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.1 LAccepted-AOC | L1 | Accepted-AOC TENDER FOUND LOWEST AND REASONABLE HENCE ACCEPTED | |
| 2 | L2₹40.0 L+₹87,515.19 (2.24%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST | |
| 3 | Rejected-Technical | - | Rejected-Technical Not in specified category hence bid is technically rejected |
Tender Value
₹43.6 L
EMD Value
₹87,500
Closing Date
18 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI MASUD ALI, IDSE
GARRISON ENGINEER (SOUTH), MUDFORT, SECUNDERABAD PIN - 500003
PROVN OF 03 URINAL BLOCK HAVING 15X URINAL POINT EACH AT FC AREA AND PT GROUND OF NO 1 TRG BN OF AOC CENTRE UNDER GE (SOUTH) SECUNDERABAD
2024_MES_647214_1
GE(S)/SEC/TOKEN-76 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
SECUNDERABAD
For Enlisted contractors class D and above category a (i), a (ii) and b (i) for unenlisted contractors meeting the eligibility criteria of above class and category for along eligible class with EMD
6 documents required · 6 mandatory
₹500
GE SOUTH, MUDFORT, SECUNDERABAD,PIN NO 500003.
₹87,500
Yes
6 Jul 2024
20 Mar 2024
20 Apr 2024
20 Mar 2024
18 Apr 2024
5 Apr 2024
20 Mar 2024 - 4 Apr 2024
Amount
Surface excavation n exc 30 cm deep and averaging 15 cmm deep and getting out hard/dense soil complete all as specified and as directed
Excavating in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation etc or wells cess pits manholes n.exc 10 Sqm on plan and getting out in Hard and dense soil complete all as specified and as directed
Excavating over areas and getting out hard/dense soil exc 1.5m and n. exc 3.0 m deep complete all as specified and as directed
Cement concrete type D 2 1:4:8 (using 40 mm graded crushed stone aggregate) in foundation filling and mass concrete complete all as specified and as directed
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips quality conforming to deformed or TMT bars complete all as specified and as directed
All as per item No 05 here-in above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders TMT bars complete all as specified and as directed
Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors and beams, etc.rough finished surfaces of concrete complete all as specified and as directed
M&L for Reinforced cement concrete (nominal mix) in type B1 1:2:4 (using 20 mm graded crushed stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed
M&L broken stone or boulder hard core of gauge exc63 mm but n exc 100mm deposited spread and levelled in layers n,exc 15 cm thick watered and rammed to true surface complete all as specified and as directed
S&F Rolled sections as in main and cross beams, hip and jack rafters, truss, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or coneecting plates Fe 410-W (Gde E 250) Quality - A complete all as specified and as directed
S & F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed
Returning filling in including spreading, levelling watering and well ramming in layers not exc 25cm thick complete all as specified and as directed
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.
M&L Damp proof course 40mm thick of PCC type B0 1:2:4 complete all as specified and as directed
M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) complete all as specified and as directed.
M&L for Brickwork with fly ash bricks, straight or curved on plan exc to any radius, half brick walls, built in CM (1:4) complete all as specified and as directed.
M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub bases, sub flooring finished even and rough complete all as specified and as directed.
M & L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate as in floor base complete all as specified and as directed.
Rendering 10mm thick of fair faces of brick work or concrete surfaces cement plaster 1:6 finished even and fair without using extra cement complete all as specified and as directed..
Rendering 15mm thick in CM 1:4 finished even and fair without using extra cement complete all as specified and as directed.
S&F Figured glass, pin head type 3mm thick and glazing with aluminium glazing clips in square n.exc 0.5 sqm in each pane complete all as specified and as directed..
M&L for glazed ceramic coloured tiles of size 300x450x7mm thick in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:3 complete all as specified and as directed.
M&L Non skid coloured ceramic tiles300x300mm x 7 to 8mm) thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for chequered cement concrete tiles of size 200x 200x25mm thick set, jointed and ointed in neat cement slurry in floors with grey cement and no pigmnet to match with the colour of tiles over and including 20mm thick screed bedding layer in cement mortar 1:6 complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top and bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC beading and joined together with solvent cement as per specification and drawing as per SSR Pt I complete all as specified and as directed.
S&F of solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and as directed.
S&F of Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 100mm complete all as specified and as directed.
S&F of aluminium anodised barrel tower bolts of extruded section and fixed 150mm complete all as specified and as directed.
S&F of extruded aluminium handles fabricated type anodised 100mm complete all as specified and as directed.
M&L for 15 mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
M&L for 20 mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement diameter of outlet in 75mm complete all as specified and as directed.
S&F for 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. Min wt 40 gms complete all as specified and as directed.
S&F for Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
M&L for painting to cement plaster surfaces with two coats of Cement base paint over a coat of alkali resistant primer after preparation of surface complete all as specified and as directed.
Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkaly resistant primer complete all as specified and as directed.
M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.
Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and as directed.
Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 110mm bore complete all as specified and as directed.
S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.
S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.
S&F PVC (SWR) bends any radius 75mm bore with access doors complete all as specified and as directed.
S&F PVC (SWR) Ventcowls of bore 110mm complete all as specified and as directed complete all as specified and as directed.
S & F 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( Min wt 90 gms) complete all as specified and as directed.
S&F Towel Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats ( Min wt 190 gms) complete all as specified and as directed.
S&F Vitreous china wash basin, white, flat back, size 550x400 mm excluding ditto but including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed.
S & F Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with 60 mm long brass screws, pointing around urinal back in cement, including all fittings cistern, brackets, flush pipe, spreader, push tap, waste coupling, grating, etc Complete set incl all fitting & fixtures complete all as specified and as directed.
S&F Vitreous china urinal partition white of size 310x700 mm terminating about 40 cm above floor line complete all as specified and as directed.
S & F Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.
S&F 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe as in repairs complete all as specified & directed.
S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and as directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in hard or dence soil complete all as specified and as directed.
M&L for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.
M&L for concrete bed to drain pipes 150mm dia using cement concrete 1:3:6 type C2 including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.
M&L Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregate ) for manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) all as specified and directed.. Note:- Reinforcement will be measured and paid seperatel
Supply and lay in trenches/fixed to walls/poles etc connecting buy using lugs, testing and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with stranded aluminium conductor 4 Core 10 Sqmm complete all, as specified and as directed Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.
Spreading riddled earth ( after preparation of excavated earth) in Cable duct with sand cushioning of cable laid in trenches complete all as directed Note:- Punned thickness 18 CM( 6.25 Cm below cale and 11.75 cm above cable) will be measured for payment purpose. Quoted rate inclusive of all arrangement as mentioned complete all as specified and as directed.
Supply and Laying bricks, common burnt clay building bricks, sub class 'B' of size 230 x 115 x 75 mm laid across in trenches for cable protection complete all as specified and as directed.
Cutting the existing road/PCC surface straight by manual, depth and width not less than 1 mtr below ground level for passing of underground cable and filling back with excavated soil upto 75% road portion and 25% shall be made with cement concrete 1:2:4 (using 20 mm graded aggregate stone complete all as specified and as directed.
M & L for Concealed Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc (a) One light point controlled by one, one way switch 5A, SP complete all as specified and as directed.complete all as specified and as directed.
(b) One ceiling / exhaust fan point controlled by one, one way switch complete all as specified and as directed.
(c) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.
S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts complete all as specified and as directed.
Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts complete all as specified and as directed.
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified and as directed.
S and F sheet metal enclosure MCB DB SPN 8 way 240 Volts double door with magnetic locking system complete all as specified and as directed.
S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and as directed.
S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and as directed.
S & F wall mounted box type LED of 18/22 watt with LED Lamp, with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete all as specified and as directed
S & F wall mounted LED batten of 09 watt with LED Lamp, complete all as specified and as directed
Supply & fix Exhaust fan of metal body 300 mm sweep with metallic louver including connecting up of PVC insulated copper conductor multi stranded cable of suitable size from ceiling rose to connector complete including provision of HDPE high grade plastic net 800 GSM,hole size one inch,thickness 3mm green colour on the outside wall complete all as specified and as directed
M&L for cutting of wall in round shape irrespective of height of building using machine cutting only and making opening suitable for mounting of 300 mm dia exhaust fan and making good disturbed surfaces matching with existing colour including grouting of nuts and bolts and clearing the debris and making the work area clean all as specified and directed. Note: Contractor to check the site requirement.
Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe med grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade.
S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and as directed
M & L bracket made out of GI pipe of 25mm dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and as directed
Supply and laying steel water tubing medium grade, galvanised with all fitting, laid in trenches and testing for leakages complete all as specified and directed for the following sizes:- (a) 20mm dia bore
(b) 25mm dia bore
(c) 40mm dia bore
Supply and laying steel water tubing medium grade, galvanised with all fitting, fixed to wall and ceilings or laid in floor and testing for leakages complete all as specified and directed for the following sizes:- (a) 20 mm dia
(b) 25 mm dia
Supply and fix in replacement of unserviceable Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and directed for the following sizes:- (a) 25mm dia bore
(c) 40mm dia bore
Cutting the existing road of any kind straight by manual, depth and width not less than 30 cm for pipes up to 40 mm dia and filling back with excavated soil up to 75 % road portion and 25 % shall be made with cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate complete all as specified and directed.
K LAKSHMAN SINGH AND CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .