Loading
Loading…
Loading…
Tender Value
₹7.9 Cr
EMD Value
₹11.8 L
Closing Date
30 Sept 2026, 5:00 pm3d left
Department of Personnel and Administrative Reforms e Governance
Director KSRSAC
CONSTRUCTION OF OFFICE BUILDING AND GUEST HOUSE BUILDING FOR KARNATAKA STATE REMOTE SENSING APPLICATIONS CENTRE (KSRSAC) AT MYSORE
DPAREGOV/2026-27/BD/WORK_INDENT3
DPAREGOV/2026-27/BD/WORK_INDENT3
Open
Buildings
Two Tender Document System(Two Cover)
DPAR eGOV KSRSAC Director Office Bangalore
2 documents required · 0 mandatory · 2 optional
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
1. Earthwork in excavation-3230.00 Cum, 2. Anti-termite treatment-1446 Sqm, 3. PCC/ RCC-1275.00 Cum, 4. MS Grill-4240 Kg. 5. Reinforcement Steel (TMT)- 113.00 MT, 6. Structural Steel- 20842 kg, 7. Solid Concrete Block Masonry-2402 Sqm, 8. Plastering-7113 Sqm, 9.Painting-7565 Sqm, 10. Vitrified / Ceramic glazed Tile Flooring-1981 Sqm, 11. Granite Flooring-467 Sqm 12. Waterproofing Treatment (PU/Equivalent)-1590.10 Sqm, 13. UPVC / Aluminum Windows-214 Sqm, 14. False Ceiling (Gypsum/Grid) 1052 Sqm, 15. Acoustic Paneling-150 Sqm 16. VOX Soffit Infratop false ceiling-285 Sqm17. Profiled Poly Urethane insulated Roof(PUF Sheet)-270sqm 18. L Shaped Workstation- 52nos 19. MEDIUM BACK CHAIR/ Chair with Writing Pad-128 20. Chairs for Dinning Table- 60 21. Queen Bed with bed -13 set, 22. Wardrobe Unit- 98 sqm 23. Providing & fixing Roller Blinds- 94sqm 24. Mesh ceiling- 80sqm 25. calcium silicate false ceiling-75sqm 26. Mobile pedestal unit-53 nos 27. TV Ledge Wooden slats-65 nos
The tenderer or nominated subcontractor shall possess valid license and experience in Water Supply & Sanitary Works (minimum Rs.21.00 Lakhs executed work
The tenderer or nominated subcontractor shall possess valid Electrical Contractor License and experience (minimum Rs.72.00 Lakhs executed work).
The tenderer should have successfully completed, as a Prime Contractor, at least: One similar work costing not less than Rs. 6.30 Crores 80% during the last five years.
The tenderer shall demonstrate availability (owned / leased) of key equipments: Concrete Mixers 2 Nos Needle Vibrators 4 Nos Transit Mixer / Arrangement 3 No Material Transport Vehicles 3 Nos Centering & Shuttering Material adequate for 4000 Sqm slab area, Tipper-3nos, Earth Mover2nos.
GST registration, GST paid details and IT returns for last 5 years
Audited financial statements for last 5 years
The tenderer shall have liquid assets, credit facilities, or access to lines of credit of not less than Rs.2.40 Crores for meeting cash flow requirements during execution.
The tenderer should have achieved, in at least two financial years during the last Five financial years FY 2020 to 21 to FY 2024 to 25, an Rs. 16.00 Crores i.e. approximately 2 times the estimated project cost).
Available bid capacity
List of tenders already submitted
Declaration of ongoing commitments
Site visit certificate
The tenderer shall propose qualified personnel
₹5,000
₹11.8 L
30 Sept 2026
11 Sept 2026
3 Oct 2026
17 Sept 2026
17 Sept 2026
CONSTRUCTION OF OFFICE BUILDING AND GUEST HOUSE BUILDING FOR KARNATAKA STATE REMOTE SENSING APPLICATIONS CENTRE (KSRSAC) AT MYSORE
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work in surface excavation by mechanical means for lowering and leveling the stilt for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cautio...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and ...
Anti-termite treatment work
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenc...
Concrete, Formwork and reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite or ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite or ...
Providing and laying in position Cement Concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite or t...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Shuttering work for Isolated Footing at8percent
Shuttering work for Combined Footing at3percent
Shuttering work for Pedestals at70percent
Shuttering work for Columns Upto Plinth Beam at70percent
Shuttering work for Wall at 10percent
Shuttering work for Plinth Beam at50percent
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Columns (Additionalities of Formwork for Columns at 70percent - Ground Floor)
Columns (Additionalities of Formwork for Columns at 70percent - First Floor)
Columns (Additionalities of Formwork for Columns at 70percent Terrace Floor)
Roof Beam and Lintel Beam (Additionalities of Formwork for Roof Beam, Lintel Beam at 60percent Ground Floor)
Roof Beam and Lintel Beam (Additionalities of Formwork for Roof Beam, Lintel Beam at 60percent First Floor)
Roof Beam and Lintel Beam (Additionalities of Formwork for Roof Beam, Lintel Beam at 60percent Terrace Floor)
Roof Slab (Additionalities of Formwork for Roof Slab at 50percent Ground Floor )
Roof Slab (Additionalities of Formwork for Roof Slab at 50percent First Floor)
Roof Slab (Additionalities of Formwork for Roof Slab at 50percent Terrace Floor)
Staircase (Additionalities of Formwork for Staircase at 50percent Ground FLoor)
Staircase (Additionalities of Formwork for Staircase at 50percent First Floor)
Chajja (Additionalities of Formwork for Chajja at 45percent Ground Floor)
Chajja (Additionalities of Formwork for Chajja at 45percent First Floor)
Chajja (Additionalities of Formwork for Chajja at 45percent Terrace Floor)
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Columns (Additionalities of Formwork for Columns at 70percent - First Floor)
Columns (Additionalities of Formwork for Columns at 70percent Terrace Floor)
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints...
Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing Flush or Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sanafter raking joints to depth nicely lining, including cost of materials, labour, curing as per s...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or m3 and minimum compressive strength of 4.00 N or mm2 conforming t...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or m3 and minimum compressive strength of 4.00 N or mm2 conforming t...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or m3 and minimum compressive strength of 4.00 N or mm2 conforming t...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg or m3 and minimum compressive strength of 4.00 N or mm2 conforming t...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg or m3 and minimum compressive strength of 4.00 N or mm2 conforming t...
UPVC, Steel and Glazing Works
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel prim...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elast...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elast...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elast...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer) and lead f...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxidat 6PHR with TPE(Thermo Plastic Elastomer) and lead f...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer....
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 m² and upto 16.80 m² in the area including cost of materials, labour, usage charges of...
Extra for providing Manually operated Bevel Gear Box for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shal...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shal...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shal...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and ...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and ...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and ...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such...
FULLY GLAZED PARTITION WITH TOUGHENED GLASS & ALUMINIUM CHANNELS
Providing and fixing full height glass partition with 12mm thick clear toughened glass as per design fitted over alumini...
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...
Providing and fixing 950 mm Aluminium Satin Finish Hydraulic Door Closer consists of silver colour, Maximum door weight of 40-80kg, 950mm Size, Product Dimensions of 170x40x60mm.
Providing and fixing Stainless Steel Glass To Glass Round Lock having chrome plated finish type suitable for 8-12mm thick glass.
Providing and fixing Stainless Steel Godrej H Type 32x457 mm Stainless Steel Satin Finish Pull Handle suitable for 8-12mm thick glass having 457mm length.
Providing and fixing Hafele Stainless Steel Matt finish Glass Door Lock with Handle both sides Suitable for Glass having thickness of 8-12 mm having round shape handle, SS Matt finish type, Rebated Do...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...
Providing,fabricating and fixing Profiled Poly Urethane insulated Roof(PUF Sheet) having modular density 40kg/m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel,...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer Compositsolid door or window or Clerestory windows and other Frames or Chowkhat comprising of virgin PVC polymer of K value 58-60...
Providing and fixing factory made single extruded WPC (Wood Polymer Compositsolid door or window or Clerestory windows and other Frames or Chowkhat comprising of virgin PVC polymer of K value 58-60...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Compositsolid plain flush door shutter of required size comprising...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood Polymer Compositsolid plain flush door shutter of required size comprising...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
DOOR FIXTURE WORKS
Providing supply and fixing SS 304 Aldrop - 250mm x 16mm for door shutters including SS screws cost of materials, labour etc., complete as per specifications of architects details. ...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
a) Ground Floor
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete
a) Ground Floor
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
a) Ground Floor
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :
25x85x5.5 mm (heavy type)
a) Ground Floor
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :
25x85x5.5 mm (heavy type)
Providing and fixing bright finished brass tower bolts (barrel typwith necessary screws etc. complete :
a) Ground Floor
Providing and fixing bright finished brass tower bolts (barrel typwith necessary screws etc. complete :
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Aldrop 16mm dia, 200mm
a) Ground Floor
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Aldrop 16mm dia, 200mm
Providing and Fixing Holdfast of size 260mm x 25mm x 5mm
Waterproofing Works
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based co...
Polyurethane based Single Component for New Surface Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace ...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone ...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08percent and conforming to IS: 15622, of approved make, in all colours and shad...
Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08percent and conforming to IS: 15622, of approved make, in all colours and shad...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps etc. in...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 and IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA and for Resi...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over ro...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...
Providing and fixing of clay tiles for cladding tiles of size 230x75x10mm thick on 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) & jointed with Adhesive/cement slurry over rough plaster surf...
Providing and fixing shira stone slab cladding for wall or concrete lining etc., over 15mm thick bed of cement mortar 1:4 including pointing in cement mortar 1:3 (1 cement: 3 line aggregates) with adm...
Finishing works
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 m²) over and including priming coat of exterior primer applied at 2.20kg/10 m² to give an e...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L/10 m²) over and including priming coat of exterior primer applied at 2.20kg/10 m² to give an e...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L or 10 m² over an under coat of primer applied at 0.75 L or 10 m² of approved brand and manufacture ...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L or 10 m² over an under coat of primer applied at 0.75 L or 10 m² of approved brand and manufacture ...
FALSE CEILING WORKS
Providing and fixing false ceiling at all height including providing and fixing of frame work made of specialsections, power pressed from M.S. sheets...
Providing and fixing false ceiling at all height including providing and fixing of frame work made of specialsections, power pressed from M.S. sheets and galvanized with zinc coating o...
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized ...
Mesh ceiling : supply of LD square make Expandable Flat mesh ceiling made of 0.8mm CRCA sheet to form a hex formation of 7mm/10mm Honeycomb Structure the tile to powder coated in any regular matt fini...
Providing and Fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on i...
Providing and Fixing 15mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on i...
Providing and fixing VOX Soffit Infratop false ceiling SV 08, panel sizes of 300mmx2700mm , durable and resistant to moisture, water proof and free from borer-fungus-termite attack, therma...
LACQUERED GLASS PANELLING
Providing and fixing 4mm thick lacquered glass panelling formed using with 19 mm thick commercial ply back support including Aluminium 'U' sections(6mmX6mm) at Intermediate ...
Providing and Fixing 12 mm thick Vivre louvered panels of approved make, colour and design (as per architects choice) on existing wall including 12 mm Ply back support necessary frame work including c...
FURNITURE WORKS
L Shaped Workstation
Providing and placing L shape Workstation consisting of 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges with MS powder coated...
EXECUTIVE CABIN TABLE
Providing, Supplying and Placing of Senate Executive Table consisting of Main Desk 2000mmL X 800mmD X780mmH PLB MDF Table top with Side table Storage unit 1010mmL X 500mmD X 652m...
Providing and installing Cabin Table consisting of 25mm thick Pre laminate particle board table top with 2mm PVC edge lipping on all exposed edges with MS powder coated end support legs,...
Reception Table
Providing, manufacturing and Fixing Reception table consisting of 19 mm double thick Ply table top edge bounded with 6 mm thick CORIAN top finish at top area and at sides with 45mm dep...
Mobile pedestal unit-
Providing and fixing 400mm w X 450mm d X 650mm ht ) Mobile pedestal unit made up of 18mm thick PLPB with edge bonded for body, Two equal drawer and filing drawer with centralize...
MEDIUM BACK CHAIR
Supplying Medium Back Mesh Chair with Adjustable Arms of size 585mm(L)x585mm(W)x1015mm(H) with One Way Height Adjustable Arms with soft PU Padding, AN 70 Mesh for Breathability Fab...
Chair with Writing Pad
Providing and supplying of Student Chair given with full writing pad with Fabric Upholstered seat and back, powder coated metal arms with PU Pad Arm Rest, 25MM powder coated fin...
Premium Executive Chair
Size:675mm(L)x580mm(W)x1980mm(H) High Back Mesh Chair with Multilock Seat Sliding Mechanism, Four-way adjustable arms, Micro linear Mesh chair, Fabric Upholstered Cushion Seat...
Executive Chair
Supplying High Back Mesh Chair with Dynaflex Back Support to Provide Dual Frame Flexibility & Multilock Mechanism having size of 660mm(L)x660mm(W)x1255mm(H) with Fabric Upholstered Cus...
Fabric sofa Two seater
Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W)X2.75(H) ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per direction o...
Fabric sofa Two seater
Providing and fixing Two seater Sofa with cushion of size 5(L)x2.5(W)X2.75(H) ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per direction o...
Fabric sofa Three seater
Providing and fixing Three seater Sofa with cushion of size 7(L)x2.5(W)X2.75(H) ft made of upholstery fabric with seats fitted with padding,springs, webbing and as per directi...
Fabric sofa Single seater
Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per dir...
Fabric sofa Single seater
Providing and fixing Single seater Sofa with cushion of size 3(L)x2.5(W) X2.75(H) ft made of upholstery fabric with seats fitted with padding, springs, webbing and as per dir...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thic...
Providing & fixing of Tea table 900mm x 750mm 450mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thick laminate...
Providing and placing Engineered Wood Side Table with powder coated metal leg support & Table Frame Material Subtype with MDF without storage having table Size of 558mmW X 406mmW X 445mmH
Providing and placing Cafe table with MDF Board Table top and MS leg support and frame having table Size of 1200mmL X 900mmW X750mmH
Make: Featherlite/equivalent
Table for Anteroom
Providing and installing Table consisting of Melamine foil table top with powder coated steel underframe complete as per specifications, drawings and as directed by Engineer in cha...
Chairs for Anteroom
Providing and placing chair made of solid wood and cushion seat ( Leatherette/Fabric) with Metal powder coated legs
Size : 650mmW x 550mm D x 790mm H
Make:Featherlite(Bosco) / Equi...
Chairs for Dinning Table
Providing and placing fame Cafeteria Stackable Chair made ofPolypropylene Seat & Back and Metal Powder Coated Legs having size of W 450 x D 445 x H 755mm
Make: Featherlite Fam...
Providing & fixing of Tea table 900mm x 750mm 750mm with 12mm thick ethched tempered glass with bevelled drawing made out of BWP ply and out faces laminated with 4mm thick veneer or 1mm thi...
Providing, supplying and fixing Wooden Queen Bed of size W 69 X D 85 X H 38 Inches W 175.26 X D 215.9 X H 96.52 Cms, 110.58 Kg weight having Thick Posters, Strong Base Support, Classic Desi...
Providing and supplying Ortho Plus Latex Queen size Mattress 15cm x 213cm x 168cm having Poly cotton knitted fabric, natural latex, body zone profiled HR foam, High resilience foam and anti skid bott...
Providing and supplying OrthoMagic Essential Latex Mattress Queen size Mattress 15cm x 213cm x 168cm having soft foam Quilt, natural latex, High resilience foam, RFB Foam and anti skid bottom fabric ...
Providing and fixing storage unit of 450mm depth made out of 19mm thick Approved commercial ply for shutters, sides, bottom, Compartments and Drawers finished with Acrylic laminate (Ap...
Providing and fixing 600mm depth storage unit made out of 19mm thick Approved commercial ply for shutters, sides, bottom, Compartments and Drawers finished with Acrylic laminate (Appro...
Providing and fixing Wooden slats over the 50mm x 35mm wood frame work at spacing not exceeding 60Dmm c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed ov...
Mobile storage:
MOBILE RACK COMPACTOR
Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per instr...
Providing & fixing Roller Blinds of reputed make 38mm round Aluminium channel with blackout fabric, telting with chain (Ball) system with all necessary fittings and fixtures as per direction of Engine...
Concrete, Formwork & reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates a...
Addtionalities for Form Work for Slab at50percent
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Food Graded Water Proofing Membrane
Providing and laying water proofing treatment to the Water tanks & Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofin...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...
Providing and fixing of PVC Rungs footrest in under ground tanks / manhole using M20 concrete bed blocks for masonry walls or during construction for RCC surfaces, including cost of materials, labour,...
SEPTIC TANK and SOAK PIT
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...
Addtionalities for Form Work for Roof Beam, Lintel Beam at 60percent
Providing, supplying and laying of brick bats
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete...
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by ad...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG and above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes,...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying at site of work MS casing caps as per IS 1239 (partII) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum)....
Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl and Impeller with Low volt Motor as per specifications, to work site as per necessar...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings This includes jointing...
Providing and fixing gun metal non- return valve of approved quality
50 mm nominal bore horizontal
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Providing wrought mild steel (galvanized) GI collar confirming to IS 1239-II, 1991 with latest amendments if any
For 50 mm dia GI collar:
Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.
For 50 mm dia GI BEND
Supply and delivery at site wrought middle steel (galvanized) GI union confirming to IS 1239-II, 1991 with latest amendments if any
For 50 mm dia GI Union
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the ...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fittin...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fittin...
Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with screws, fixing materials and sealant to all sides of wall flange complete.
Make : Jaquar, M...
Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories
complete - Class
a) Ground Floor
Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories
complete - Class
Providing and fixing Shower Arm Casted 120mm Long Heavy Body Round Shape for Wall Mounted Showers with Wall Flange complete
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
a) Ground Floor
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
a) Ground Floor
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comple...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comple...
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g.
Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
a) Ground Floor
Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making ...
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making ...
Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
b. Class - Pr...
Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class
b. Class - Pr...
INTERNAL SEWERAGE SYSTEM
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
a) Ground Floor
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing & fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete..
Supplying and fixing PVC P' trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors.
Providing & Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete.
Providing and grouting sleeves made in beam/ slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all ...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :20 mm nominal bore.
a) Ground Floor
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :20 mm nominal bore.
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore.
a) Ground Floor
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :25 mm nominal bore.
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
a) Ground Floor
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Supplying & fixing suction Y'/ pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 50 mm dia
Supplying , fixing, testing and commissioning of PVC welded rain water head / khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC shee...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tru...
Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 160 mm dia PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments
Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approve...
DOMESTIC WATER TRANSFAR PUMP
Supplying, installing, testing and commissioning of submersible / Mono blockelectrical driven pump 1set . (1 working & standby) domestic water pumps for pumping domestic ...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing and fixing gun metal non- return valve of approved quality
32 mm nominal bore
Providing and fixing gun metal non- return valve of approved quality
40 mm nominal bore
Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in...
Construction of percolation well / rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI / MS rungs...
Supplying, installation, testing and commissioning of solar hot water heater comprising of solar Flat Plate Collector (FPC) of size 2120x1040x100mm and stainless steel hot water storage tank with stai...
HT ELECTRICAL WORKS
Running Single Circuit 11 kV, 3 Phase Power Line On 9 Mtr Supports with an Average Span Of 40 Mtr Using RABBIT ACSR Conductor
RCC Pole - 9 Mtr Long, 145 Kg WL
PSCC Pole - 9 Mtr Long, 200 Kg WL
11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for RCC Pole - 9 Mtr Long, 145 Kg WL
11 kV, Horizontal Cross Arm with clamps, HTST supports, bolts, nuts and washers for PSCC Pole - 9 Mtr Long, 200 Kg WL
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL
11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod)
11 kV, 45 KN Polymeric Insulator
Guy Set Complete with No. 15 Strain Insulator & Concreting materials
Rabbit ACSR Conductor with stringing
PG Clamps for Rabbit Conductor
Spiral Earth Electrode
EG Stirrups with GI wire lacing
Caution/Danger Board
Anti Climbing Device (12 Mtr GI Barbed Wire)
a) Erection of Base concreting 1:4:8, 650x650x150mm.
b) Pole conctreting 1:2:4, 650x650x1700mm
c) Providing coping for poles with 1:2:4 and as per actuals, 150mm around pole for an height of 300mm
PROPOSED DP STRUCTURE AT PROPOSED TRANSFORMER
RCC D.P structure using 9 mtrs RCC Pole with WL 145 kg
11 kV, 45 KN Polymeric Insulator
NO 15 strain insulator
Caution danger board
11 kV 200 A Single Break GOS
H Frame for mounting GOS
Spiral earth electrode
11 kV, Solid Core HG Fuse Unit
Lightning Arrester 10 kV, 5 kA Polymeric Type with Ground disconnector
11 kV, 5 KN Polymeric Pin Insulator (24 mm Dia FRP Rod)
Errection of 9Mtrs Long RCC DP Structure
Fixing of Guy set with Break insulators, turn buckle and anchor rod
Fixing danger board
fixing of GOS including wiring (11 kV Single Break 200
Errection of H Frame for mounting GOS
Fixing of Spiral earth electrode
Fixing of DOLO Cutouts
Providing concrete cement to poles with materials and labour cost including curing etc.
a) Base concreting 1:4:8, 650x650x150mm.
Supply & installation:
b) Pole conctreting 1:2:4, 650x650x1700mm
Supply & installation:
c) Providing coping for poles with 1:2:4 and as per actuals, 150mm around pole for an height of 300mm
Supply & installation:
Supply of Compact RMU (VCB/SF6 Type) with Copper Busbar, 350 MVA, 630 Amps as per IEC62271/IS-3427. 3Way RMU, 2 OD + 1 VL (One Incomer + One Breakers + One Outgoing)
Supply and making of 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permitivity XLPE Terminations - INDOOR & OUTDOOR JOIN...
HT Cable 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975
Construction of platform with size stone, cement concert for erection upto 250 kVA Transformer/Metering cubicle/Heavy Equipment. Construction of platform (1.5x1.5x1.2) Mtr in size stone, for erection ...
Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the Pole and block pipe at top an...
Spreading of Jelly - Supplying and spreading 100mm thick with 20-25m jelly with all lead and lifts.
Supply, erection, testing and commissioning of........ KVA 5Star rated aluminum wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil ...
Transporting, Positioning of RMU (Compact) unit from store to work spot including loading, unloading. (No separate crane charges) in co-ordination with site Incharge.
LT EXTERNAL ELECTRICAL WORKS
LT PANEL WORKS: Design, manufacture, supplying, fixing in position, testing and commissioning of following MV switchgear panels made up of 14G, suitable for 415 V, 3 pha...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...
Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal ...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12/24V DC.
Supplying, fixing and wiring 3 phase Digit Digital Ammeter/Voltmeter
Supplying, fixing and wiring 50/5A to 400/5A 5VA burden current transformer class 0.5 accuracy with Tape wound
Supplying of multi function Meter digital three line back light LCD type display of voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 ...
Supplying …….amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator w...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supply, erection, testing and commissioning of LT Metering Cubicle at Low Tension for 50 KW to 150 KW having specification & design as per the prototype approval. (Excluding Meter Cost & Modem Cost) ...
Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top o...
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
d) 600x600x3mm GI Plate
e) 600x600x3mm CU Plate
LT ELECTRICAL WORKS
PVC CONDUITS & ITS ACCESSORIES
Open conduit System
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, ad...
Open conduit System
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood...
Open conduit System
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood...
Open conduit System
Supplying heavy gauge PVC conduit pipe ……dia....mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesives paste etc., and fixing using inverted wood...
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and runn...
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and runn...
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and runn...
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals/PVC junction boxes, adhesives paste etc., and runn...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying and fixing sheet metal box made out of 18 SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc.
a) 200x200x65 mm
Supplying and fixing PVC/metal conduit deep junction box.
a) 19/20mm deep junction box
Supplying and fixing PVC/metal conduit deep junction box.
b) 25mm deep junction box
Supplying and fixing PVC/metal conduit deep junction box.
c) 32mm deep junction box
Extra for Groove cutting in brick wall/cc floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing the wall upto wall surface complete.
a) upto 50mm conduit in CC Floor
Supplying and fixing Metal fan box with round hook.
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit/casing capping using 2x1.5Sqmm (Phase & Neutral) & 1 x1.0Sqmm (Earth wire) FRLS multi...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS-69...
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and she...
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and she...
Supplying and Drawing flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and she...
SWITCHES, SOCKETS & ACCESSORIES
Supplying and flush mounting powder coated / galvanized metal / PVC box suitable for mounting modular switch plates. The box should be firmly flush mounted after due gr...
Supplying and flush mounting powder coated / galvanized metal / PVC box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C ...
Supplying and flush mounting powder coated / galvanized metal / PVC box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C ...
Supplying and flush mounting powder coated / galvanized metal / PVC box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C ...
Supplying and flush mounting powder coated / galvanized metal / PVC box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C ...
Supplying and flush mounting powder coated / galvanized metal / PVC box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C ...
Supplying and flush mounting powder coated / galvanized metal / PVC box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supply and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230volts, 50Hz AC supply & completely wired on existing box.
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
a) 6 Amps one way
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
b) 6 Amps Two way
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
c) 6Amps 3way socket.
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
d) Stepped fan regulator
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
e) 6 Amps Bell push
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
e) 32A,DP,Switch
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
f) 16Amps one way switch
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
g) 6/16Amps universal socket
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.
6A Batten holder
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board.
CONTROL SWITCH GEARS & ACCESSORIES
Supplying push button operated, direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic ther...
Supplying and fixing regular MCB distributionpanel confirming to IS 8828 , on wall/wood board/ flush mounting using required clamps, bolts, nuts etc.. With provision for fixing of suitable type capaci...
Supplying and fixing regular MCB distributionpanel confirming to IS 8828 , on wall/wood board/ flush mounting using required clamps, bolts, nuts etc.. With provision for fixing of suitable type capaci...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single phase ...
b) Double Door
c) Double Door
d) Double Door
e) Double Door
Supplying, fixing and wiring Residual Current Circuit Breaker [RCCB] 240/450V up to 300mA sensitivity on existing wood/panel Board.
a) 32-40Amps 2 pole
b) 32-40Amps 4 pole
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron ….and M.S. flat with bolts, washers etc… and painted with 2 coats of red oxide and then two coats of approved paint.
Supplying and fixing of metal Socket set of 2 pole and earth plugs and socket for incorporating SP and TP MCB (without MCB). The entire Plug and Socket shall be mounted in athermoplastic / powder coat...
L.T. U.G. CABLES AND EARTHING
Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reduc...
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
c) 600x600x3mm GI Plate
Supplying and running of GI / Copper strips for grounding connections, using necessary fixing materials as required.
d) 600x600x3mm CU Plate
Supplying, Fixing & proper termination of vertical Air-termination using Gunmetal ball with finials of 5 spikes mounted on 2 mtrs long copper rod, mounted at the highest point of the building, with ba...
Supply & fixing Test Link as per specification & drgs. and grouted to wall at 1200 mm. above ground level complete with all fixing accessories, clamps, screws etc, enclosed in M.S box.
Supplying & Fixing Chemical earthing for grounding, conduits, IC cut outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits, superior f...
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG GI wire.
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.
a) 2.5 sqmm to 25 sqmm
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.
b) 35 sqmm to 95 sqmm
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.
c) 120 sqmm to 240 sqmm
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial
pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards ...
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.
Supplying and fixing of Brass Cable Gland
Supplying and fixing of Brass Cable Gland
Supplying and fixing of Brass Cable Gland
Supplying and fixing 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required
Supplying and fixing 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required
Supply, termination of Aluminium End Terminal (Lug).
a) 1.5 to 10 sq.mm
Supply, termination of Aluminium End Terminal (Lug).
Supply, termination of Heavy Duty Copper Terminal Long Barrel.
a) 25 sq.mm Long barrel
Supply, termination of Heavy Duty Copper Terminal Long Barrel.
b) 50 sq.mm Long barrel
Supply, termination of Heavy Duty Copper Terminal Long Barrel.
c) 70 sq.mm Long barrel
Supply, termination of Heavy Duty Copper Terminal Long Barrel.
d) 120 sq.mm Long barrel
Fixing charges of Post top/gate/garden fitting/LED on the existing CI/GI or any other pipe using required size of reducer, wiring using suitable wires.
Fixing all types and all capacities fluorescent /false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling / rafters / girders using 23 / 0.00076 " twin twisted PVC insulated wires, requ...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necessary...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
Using 2 Mtr long 19mm 18SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel painted.
Extra length of GI pipe of class b 19mm dia for down rod.
FIRE EXTINGUISHERS - Supply & Providing 4.5Kg C02 Gas Type aluminium body Squeeze grip Fire Extinugisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 11....
Supplying of two bucket stand alongwith buckets. Complete
Supplying of Hand gloves. Complete
Supplying of first aid box. Complete
Supplying of SAFETY MASK. Complete
Supplying of FIRST AID CHART with lamination. Complete
Supplying and installation of RUBBER MAT 1mtrx1mtr-1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications.
LED LUMINAIRS / LIGHT FIXTURES & ACCESSORIES AND FANS
Supplying and fixing of LED Bulkhead of 10W with IP65 protection
and IK 08 impact resistance suitable for surface and wall mounting
Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70percent lumen maintenance with CRI more than 8. Power Input : 220-240V at 50 Hz & pow...
Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70percent lumen maintenance with CRI more than 8. Power Input : 220-240V at 50 Hz & pow...
Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours & 70percent lumen maintenance with CRI more than 8. Power Input : 220-240V at 50 Hz & pow...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has ...
Supplying of recess mounting non integral type .......... LED …… W luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceilin clamps, Power LEDs with CCT ...
Supplying exhaust fan of 1440RPM heavy duty with bracket blades complete for lighting duty suitable to operate on 230V 50Hz, AC supply..12" sweep (300mm)
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power inpu...
Supplying wall mounting fan suitable to operate at single phase 230v AC supply.
Supply of LED Street light with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with ...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Fabricating, supplying and erection of… Mtrs long hot dip Galvanized Conical Pole with BSEN 10025 grade S355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includin...
Spply of LED Bollard light fitting of … W with pressure die cast aluminium housing body fir optimal theraml dissipation. Lamp compartment comprising of anti glare clear diffuser with injection mould...
Supplying and fixing of Hot Dip Galvanized M.S Bracket suitable for out door luminairs and mounted on octoganal pole using necessary bolts, nuts etc…. Complete a) Single Arm Bracket with 1000mm Sta...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron… and M S flat …….. With bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...
Supply of on load change over switches 4 poles, AC-23A duty, 415v, 50Hz, AC supply. (Open Execution).
Supply of on load change over switches 4 poles, AC-23A duty, 415v, 50Hz, AC supply. (Open Execution
Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal ...
Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal ...
Supply and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal ...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220V AC, 50Hz 12/24V DC.
Supplying, fixing and wiring 3 phase Digit Digital Ammeter/Voltmeter
Supplying, fixing and wiring 50/5A to 400/5A 5VA burden current transformer class 0.5 accuracy with Tape wound
Supplying of multi function Meter digital three line back light LCD type display of voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 ...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50Hz AC with latest microcontroller based, digital read out of percentage leakage curr...
Supplying …….amps rated 3 phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator w...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross-3 with short circuit breaking ca...
Supply and fixing of 3 pole contactor with No/NC contacts on existing wood/ panel board using necessary bolts, nitsm washers and wiring etc, complete with AC-3 rating and as per IS- 13947.
Supplying, fixing and wiring heavy duty low voltage capacitors confirming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery.
Supplying, fixing and wiring Automatic Power Factor controller fully, static units controilled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and ...
UPS, BATTERIES.
Supplying, erecting, testing and commissioning of ON-LINE UPS System suitable for operation on 415V Input and 415V, Output, 50Hz, A/C supply with Isolation Transformer all accessories...
Supplying, erecting, testing and commissioning of ON-LINE UPS System suitable for operation on 415V Input and 415V, Output, 50Hz, A/C supply with Isolation Transformer all accessories complete and ex...
Supplying, installation, testing & commissioning of 12volts DC AH Batteries in poly propylene container for UPS Low maintenance Tubular/smf batteries.
12V, 100 AH Capacity. Acid battery.
CAMERAS & ACCESSORIES
Supply, Installation, Testing & Commissioning of 1/3" progressive scan CMOS, 5.0 megapixel, IP based Colour camera, Up to 30 m IR range, Color: 0.01Lux, 1000TVL, Digital WDR (Wid...
Supply, Installation, Testing & Commissioning of 16port 10/100/1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories.
Supply, Installation, Testing & Commissioning of 24port 10/100/1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories.
Supply, Installation, Testing & Commissioning of NVR (Networkable Video Recorder)16Channel NVR, Up to 16ch IP cameras input, Up to 5 Megapixels resolution recording, HDMI and VGA output at up to 1920b...
Supply, Installation, Testing & Commissioning of HDMI, 4K, Display Monitor 40" high resolution, Monitor with all mounting bracket accessories.
Supplying and drawing UTP-CAT 6 LAN cable.
Supplying and fixing of switch mounting rack with power manager & cable manager.
6U with 450mm depth
NETWORKING AND COMMUNICATION :
Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293.
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
RJ45/I.O. outlet Cat -6 (For data and voice)
Supplying and drawing UTP-CAT 6 LAN cable.
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.
Supplying and drawing PVC insulated gas injected physical foam jelly flooded co-axial TV cable. RG-6.
Supplying and fixing of switch mounting rack with power manager & cable manager.
6U with 450mm depth
Supplying and fixing of switch mounting rack with power manager & cable manager.
36U with 450mm depth
Supplying and fixing of power strip.
Supplying and fixing of fan.
Supplying fixing of Network Switches.
10 Port Gigabyte (Manageable)
Supplying fixing of Network Switches.
24 Port Gigabyte (Manageable)
Supplying & fixing of ….mtrs Cat6 Patch Cable - a) 1 mtr
Supplying & fixing of ….mtrs Cat6 Patch Cable - b) 2 mtr
Supplying & fixing of Patch Panel for LAN cabling.
24 Port 10/100/1000 Patch Panel
Supplying and Fixing of MDF Krone junction box with KRONE module / Telephone cable termination.
Supplying and Fixing of MDF Krone junction box with KRONE module / Telephone cable termination.
Supply and laying 6 Core Multimode OM3 outdoor Fiber Cable.
Supply and providing 12F, 1U, LC MM OM3, Loaded with Pigtails, Splice tray, adapter & splice protectors
Supplying of …….. TR Invertor type split air conditioners suitable for operation on A/C supply single phase 50 Hz 230Volts with hermetically sealed compressor with air cooled condenser, ...
Supplying of …….. TR Invertor type split air conditioners suitable for operation on A/C supply single phase 50 Hz 230Volts with hermetically sealed compressor with air cooled condenser, latest R41...
Installation charges of slit type air conditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support up to 4.0 ton split/cassette type A/C.
Supplying and installation of insulated refrigrent copper tubing of 5/8" and 3/8" with polythene foam insulation 3 core 80 stand copper wiring between indoor and outdoor unit. Leak testing oil and gas...
Extra for fabrication supply and fixing of stand fabricated using slotted angle/L.angle of size 6mmx50mm for mounting out door/indoor A C unit/Batteries
Supplying, erecting, testing and comissioning of voltage stabilizer suitable for 170 to 2701v in put and load variation from no load to full load, with over load protection, spike suppression, operati...
HVAC LOWSIDE WORKS
PART B - HVAC LOWSIDE
Supply, Installation, Testing and Commissioning of Circular / Rectangular inline fans for exhaust air as shown on drawings, complete wit...
Supply, Installation, Testing and Commissioning of Circular / Rectangular inline fans for exhaust air as shown on drawings, complete with sheet metal casing, direct driven centrifugal fan, motor with ...
Supply, Installation, Testing and Commissioning of Circular / Rectangular inline fans for exhaust air as shown on drawings, complete with sheet metal casing, direct driven centrifugal fan, motor with ...
Air Distribution Works
GI Rectangular Duct (Factory Fabricated)
Supply, Installation, Testing & Commissioning of following sizes of GI sheet metal with 120 GSM rectangular ducts (FACTORY FABRICATED) i...
Supply, Installation, Testing & Commissioning of following sizes of GI sheet metal with 120 GSM rectangular ducts (FACTORY FABRICATED) in accordance with SMACNA standard and complete withall accessori...
Supply, Installation, Testing & Commissioning of following sizes of GI sheet metal with 120 GSM rectangular ducts (FACTORY FABRICATED) in accordance with SMACNA standard and complete withall accessori...
UL-555 Certified Fire damper
Supply & Installation of UL-555 Certified Fire damper complete with outer shell with 1.6mm thick galvanized steel frame and the blade/Leaf with 16G GSS,Class-1 Leakage, co...
Supply & Installation of UL-555 Certified Fire damper complete with outer shell with 1.6mm thick galvanized steel frame and the blade/Leaf with 16G GSS,Class-1 Leakage, control panel,temperature Senso...
Fire Sensors with all Controls, Actuators and other accessories - Torque 8 Nm
Supply & Installation of GSS Volume Control Dampers (18 G GSS)with operating handle for Supply air duct branches in accordance with the approved shop drawings and technical specifications.
GI Spigot and Butterfly Dampers
Supply & Installation of GI Spigot and Butterfly Dampers. The damper shall be made of 18G GSS sheet. The blade shall have rubber gasket beeding for air tightness. Spigo...
Supply & Installation of GI Spigot and Butterfly Dampers. The damper shall be made of 18G GSS sheet. The blade shall have rubber gasket beeding for air tightness. Spigots to have dual notch for firmly...
Supply & Installation of GI Spigot and Butterfly Dampers. The damper shall be made of 18G GSS sheet. The blade shall have rubber gasket beeding for air tightness. Spigots to have dual notch for firmly...
GI Round Duct (22SWG)
Supply & Installation of GI Round Duct (22G)of Following sizes complete with connecting rings and supports in accordance with the approved shop drawings and technical specificati...
Supply & Installation of GI Round Duct (22G)of Following sizes complete with connecting rings and supports in accordance with the approved shop drawings and technical specifications of the following s...
Supply & Installation of GI Round Duct (22G)of Following sizes complete with connecting rings and supports in accordance with the approved shop drawings and technical specifications of the following s...
Insulated flexible Ducting
Supply & Installation of Insulated flexible ducting, complete with connecting rings, aluminium foil tape, duct supports etc.The flexible duct shall be made of Double laminat...
Supply & Installation of Insulated flexible ducting, complete with connecting rings, aluminium foil tape, duct supports etc.The flexible duct shall be made of Double lamination of aluminium foil, poly...
Supply & Installation of Insulated flexible ducting, complete with connecting rings, aluminium foil tape, duct supports etc.The flexible duct shall be made of Double lamination of aluminium foil, poly...
Aluminium (18SWG) 4-Way Supply Air Diffusers
Supply & Installation of Powder coated Extruded Aluminium (18 G) 4- way Supply Air Diffuserswith removable core, in accordance with the approved shop drawi...
Aluminium (18SWG) Return Air Diffusers
Supply & Installation of Powder coated Extruded Aluminium (18 G) Return air diffuserswith removable core, in accordance with the approved shop drawings and techn...
Aluminium (18SWG) Round Supply Air Diffusers
Supply & Installation of Powder coated Extruded Aluminium (18 G) Round Supply Air Diffusers with removable core and butterfly type collar damper, in accord...
Aluminium (18SWG) Round Return Air Diffusers
Supply & Installation of Powder coated Extruded Aluminium (18 G) Round Return air diffuserswith removable core, in accordance with the approved shop drawin...
Spill Air Plenum/ Mixing Boxes made of GI (22SWG)
Supply & Installation of Spill Air Plenum / Mixing boxes made of 22G G.I sheet with necessary spigot connection for fixing flexible duct and suitable ...
Insulation Works
Supply & Installation of Acoustic liningon GI Supply air ducts. The Acoustic material shall be 15 mm thick open cell elastomeric foam class '1'. The density shall be 140 -160 kg.m3 wi...
Supply & Installation of External Thermal insulationon Supply air ducts with Class 'O' Elastomeric nitrile rubber Thermal Closed Cell and thermal conductivity of not more than 0.035 W/(m.k) at 0C. The...
Minor civil works such as making any small openings / closing the same for refrigerant pipes / chilled water pipes / ducts / dampers etc.
Fire Barrier Sealent
Supply & Installation of Fire Barrier Sealants for duct and chilled water pipes penetrations through fire rated walls in accordance with the approved shop drawings and specificati...
PART A - VRF Highside Equipmets
VRF Highside Equipmets
VRV / VRF OUTDOOR UNIT
Supply, Installation, Testing & Commissioning of following capacity of VRV/VRF outdoor unit (ODU) complete with hermetic S...
PART B - VRF LOWSIDE WORKS
VRV / VRF INDOOR UNIT
Fan coil unit (IDU) with R410A refgrigerent, comprisisng 2 row direct expansion cooling coil,electronic expansion valve,thermostat,fittings,blower and...
VRF Related Low Side Work
Refrigerant Piping
18G, hard drawn copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile rubber insulation, class-o, covered with complete with elbo...
18G, hard drawn copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile rubber insulation, class-o, covered with complete with elbows, T joints, sleeves etc., with GSS slotted ...
18G, hard drawn copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile rubber insulation, class-o, covered with complete with elbows, T joints, sleeves etc., with GSS slotted ...
18G, hard drawn copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile rubber insulation, class-o, covered with complete with elbows, T joints, sleeves etc., with GSS slotted ...
18G, hard drawn copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile rubber insulation, class-o, covered with complete with elbows, T joints, sleeves etc., with GSS slotted ...
18G, hard drawn copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile rubber insulation, class-o, covered with complete with elbows, T joints, sleeves etc., with GSS slotted ...
18G, hard drawn copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile rubber insulation, class-o, covered with complete with elbows, T joints, sleeves etc., with GSS slotted ...
18G, hard drawn copper Refrigerant piping, duly insulated with closed cell elastomeric nitrile rubber insulation, class-o, covered with complete with elbows, T joints, sleeves etc., with GSS slotted ...
Power/ Communication Wire
Supply, Laying and Testing of Power / communication Works Related to HVAC which is applicable for the above units.
3 Core 2.5 Sqmm
Supply, Laying and Testing of Power / communication Works Related to HVAC which is applicable for the above units.
4 Core 1.5 Sqmm
Supply & Laying of 8SWG GI Wire
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes
100 mm wide with 2 mm thick protective cover
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes
150 mm wide with 2 mm thick protective cover
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes
300 mm wide with 2 mm thick protective cover
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes
450 mm wide with 2 mm thick protective cover
Supply of additional Refrigerant R-410A
Fiber glass cloth and two layers of shield coating on insulation of VRF piping (for outdoor application)
Imported refrigerant joint / Branch distibutors indoor to outdoor complete with nitrile rubber insulation, supporting etc.,
CPVC Pipes with 6mm thick Closed Cell Polyethylene
Supply, installation testing and Commissioning of Drain Piping for indoor units. CPVC piping complete with fittings, supports as per specifications a...
CPVC Pipes with 6mm thick Closed Cell Polyethylene
Supply, installation testing and Commissioning of Drain Piping for indoor units. CPVC piping complete with fittings, supports as per specifications a...
CRITICAL VRF BOQ
PART A - VRF Highside Equipmets
VRV / VRF OUTDOOR UNIT
Supply, Installation, Testing & Commissioning of following capacity of VRV/VRF outdoor unit (ODU) complete with hermetic SCROLL ...
VRV / VRF INDOOR UNIT
Fan coil unit (IDU) with R410A refgrigerent, comprisisng 2 row direct expansion cooling coil,electronic expansion valve,thermostat,fittings,blower and motor, insulated drain pan...
Indoor unit (IDU) with R410A refgrigerent, comprisisng 2 row direct expansion cooling coil,electronic expansion valve,thermostat,fittings,blower and motor, insulated drain pan enclosed i...
Auto Sequential Control Panel
Supply,installation testing & commissioning of Auto sequential control panel for the above units which Sequentially changes operating units every 8 hours, phase change,...
Power/ Communication Wire
Supply, Laying and Testing of Power / communication Works Related to HVAC which is applicable for the above units.
3 Core 2.5 Sqmm
Supply, Laying and Testing of Power / communication Works Related to HVAC which is applicable for the above units.
4 Core 1.5 Sqmm
Supply & Laying of 8SWG GI Wire
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes.
100 mm wide with 2 mm thick protective cover
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes.
150 mm wide with 2 mm thick protective cover
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes.
300 mm wide with 2 mm thick protective cover
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes.
450 mm wide with 2 mm thick protective cover
Supply and Laying of Cable Tray for Copper piping for below mentioned sizes.
600 mm wide with 2 mm thick protective cover
Supply of additional Refrigerant R-410A
Imported refrigerant joint / Branch distibutors indoor to outdoor complete with nitrile rubber insulation, supporting etc.,
CPVC Pipes with 6mm thick Closed Cell Polyethylene
Supply, installation testing and Commissioning of Drain Piping for indoor units. CPVC piping complete with fittings, supports as per specifications a...
CPVC Pipes with 6mm thick Closed Cell Polyethylene
Supply, installation testing and Commissioning of Drain Piping for indoor units. CPVC piping complete with fittings, supports as per specifications a...
CPVC Pipes with 6mm thick Closed Cell Polyethylene
Supply, installation testing and Commissioning of Drain Piping for indoor units. CPVC piping complete with fittings, supports as per specifications a...
Canvas Connection for IDU
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KSRAC MYSORE-OFFICE BUILDING TENDER.pdf
Design Document • 10.47 MB
technical criteria.docx
Tender Submission Guidelines • 0.02 MB
KSRAC MYSORE-GUEST HOUSE TENDER.pdf
Design Document • 9.08 MB
KSRSAC-RFP-2026-Building.docx
Tender Document • 0.33 MB
Addendum01.pdf
pdf • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .