REPAIR OF JOINERY PANELING FALSE CEILING AND OTHER BR WKS AT OAF UNDER GE 970 EWS

Amount

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each but with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n.exec 2 sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

M&L for 2nd class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for 2nd class hardwood glazed and skelton shutters 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and directed.

All as per item No 6 here-in-before but 30mm thick.

M&L for Second class hardwood rail and style plain framed panelled shutter (two panel) 35mm thick with lock rail and panel of 9mm B.W.P. commercial ply or 12mm venerered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for preparation of new wooden or wood based surfaces of any description, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L for Framed work as grills with end bars shoulders/framed guard bars and similar work conforming to Fe-410 or 310, fixed in repairs, complete all as specified and directed.

S&F Butt Hinges medium weight cold rolled mild steel 125 mm long complete all as specified and directed.

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, 100mm long complete all as specified and directed.

S&F aluminum anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminum anodised barrel tower bolts of extruded section 100mm long complete all as specified and directed.

S&F 150 mm over all length of cover plate of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F Aluminum anodised sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F Aluminum anodised bow handle fabricated type extruded section of 150mm long complete all as specified and directed.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to fixed with steel framed work and wooden framed work with & incl necessary items complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to fixed with steel framed work and wooden framed work with & incl necessary items complete all as specified and directed.

S&F in repair sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square, rectangle n.exc 0.5 Sqm in each pan and including hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsall complete all as specified and directed.

S&F for sheet glass 4.0mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair Harrison rails (Curtain rod//drapery rod), 20mm dia, powder coated with and including fency type PVC bracket 2 Nos of each opening and side stopper fency type powder coated of required shape and size 2 Nos of each opening complete all as specified and directed.

Supply and fixed in repair aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.

S&F 0.63 galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 1.00 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed.

Preparing new steel surfaces of any description, over exceeding 10 cms width or girth applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete all as specified and directed.

S&F 12mm thick Gypsum board fixed in anodised aluminium snap grid 605 X 605mm frame work as in false ceiling including hangers 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long fixed with including dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F in repairs 2nd class softwood 15mm thick boarding as required planed one side and edges tongued and grooved or rebated for ceilings fixed with nails in any situation with and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 6 mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface fixed in repairs complete all as specified and directed.

M&L for 25 mm thick 2nd softwood planed one side & edges tongued and grooved or rebated, and fixed with nails and including dismantling of baording any description, fixed in any position with nails including fillets complete all as specified and directed.

S&F in repair for 2nd class hardwood (wrought) in scantling for timber frame and fixed complete all as specified and directed.

M&L for second class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or boards exc 6 Sq.cm & n.exc 13 Sq.cm with and including two coat of French polish complete all as specified and directed.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in shelves, partition, wall and lineing with and including dismantling boarding, any description , fixed in any position with nails complete all as specified and directed.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in partition wall with including dismantling wall (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 0.9mm thick decorative laminate type-1, of surface finish, colour and pattern as approved fixed with approved adhesive as per marker's instructions complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and fair complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work complete all as specified and directed.

Excavation in trench in soft/loose soil not exceeding 1.5M wide and not exceeding 1.5M in depth not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus excavated material to a distance n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above starting point complete all as specified and directed.

Demolition and breaking up 300 mm dia drain pipes (Salt glazed ware,AC or reinforced concrete ) set in cement mortar complete all as specified and directed.

M & L Concrete bed 1 : 3 : 6 type - C-2 to drain pipe of dia 300mm including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S & F Reinforced concrete pipes 300 mm bore, class NP2 , laid and jointed complete with collars complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, sub base / mass concrete etc complete all as specified and directed.

M & L in repair 60 mm thick interlocking tile of M-30 mix laid over dry sand cushioning, with grey cement and pigment , filling of joints with sand & compaction after filling of joints and edges shall be secured with PCC 1:2:4 type B-0 complete all as specified and directed. (Note : Supplying and spreading for sand cushioning shall be measured and paid separately) .

M & L in repair Precast cement concrete block Type B1 1:2:4 (20 mm graded aggregate) masonry with solid blocks exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed.

M&L for old size brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 for walls with including demolition of brick work / PCC block masonry or stone/Boulder masonry built in cement mortor incl all quoins arches pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including preparing new plastered or unplastered surfaces on walls and applying two coats of oil emulsion distemper of surface upto ture finish over a coat of water base primer complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish and preparing new plastered or unplastered surfaces on walls and applying two coats of oil emulsion distemper of surface upto ture finish over a coat of water base primer complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry and preparing new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and directed.

Supply and spreading sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L chequred cement concrete tile 30 cm x 30 cm x 20 mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 20 mm thick screed bed in cement mortar 1:6 including dismatling of old tiles complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in slab supported on wall, landings balconies, canopies, deck slabs and shelves etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 63, but on vertical surfaces such as skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles coloured designer and pattern (light & dark shade combination) in vertical surface 450X 300X 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 67, but on vertical surfaces such as skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per Item No 70 above but in riser of steps, skirting, dado and pillar laid over with and including 10mm thick backing coat in CM 1:4 and jointed complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match shade of granite with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed

Supply and fixed in repair safety locks mild steel with 4 levers for rolling shutter including removal of existing locks and fixing of new lock with complete accessories complete all as specified and directed.

Supply and fixed in repair ball bearing for rolling shutter including of removing of top cover of rolling shutter of any specifiction , fixing of new ball bearing , refixing of top cover of rolling shutter complete all as specified and directed.

Fixing only in repair of rolling shutter including of removing of top cover of , greasing , removing og bending of shutters , new fixing of anchoring rod, hasp, servising of springs , shutter running channels , etc , of rolling shutter of any specifiction , refixing of top cover of rolling shutter and make smooth opening and closing rolling of shutter, of shutter of any size , gear operated, or chain and pully etc completed all as specified and directed.

M/S ADIL CONSTRUCTIONS

M/S LATIF AHMAD BABA CONSTRUCTION

M/s Nasir Rasool Dar

M/S Sultan Enterprises

M/S GHULAM HASSAN KUCHAY

M/S B S CONSTRUCTIONS

rafiq trading co

G N Constructions

M/S BASHIR AND SONS

M/S Thakur & Sons