SPECIAL REPAIR AND ADDN/ALTN TO BLDG NO 120/01 TO 120/04 HS MARG MIL STN AT NASIRABAD

Amount

Taking down cement or cement lime plaster on stone/brick wall, ceiling inlcluding raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in Cement mortar comlete all as specfied and directed.

M&L for Keyed pointing to random or polygonal rubble, uncoursed with CM 1:3 or brought upto course complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of brick work or concrete surfaces, finished even and smooth complete all as specified and directed (WPC measured and paid separately) .

M&L for 10mm thick rendering in cement mortar in CM (1:3) on ceiling surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rough cast plaster over 10mm thick cement plaster in cement mortar 1:4 on stone / brick masonary wall surfaces complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed

M & L for preparation of new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer, complete all as specified and directed.

M&L for complete removal of existing treatment including preparation of surfaces and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer over & including white wall care putty (make-Birla/JK/Asian) on walls all as specified & as directed.

Demolition of cement concrete (unreinforeced) in ground floors and pavings n. exc 15cm thickness (below or above ground level).

M&L for machine cut Kota stone slab flooring 18-20mm thick over and including 15mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as spd & directed.

M&L for 16-18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window -cills, cooking platforms and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edge laid over 15mm thick screed bed in CM (1:6) including rounding of edges of stone slabs one edge, complete all as spcified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm without drainage board, with plugs, washers and waste including fixing cantilever brackets complete all as specified and directed..

Surface dressing n.exc 15 cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for PCC (1:4:8) Type D-2 100 mm thick using 40 graded stone aggregate as in sub base of floor all as specified.

M&L for factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 50 mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed stone agg regate) as in rounded or chamfered on edges in any description, complete all as specified.

Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 7 to 8 mm thick on vertical surfaces, area of each tile of exc 0.11 Sqm and but not exc. 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick plastering in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6.

M&L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for fly ash brick work old size bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for fly ash brick work with old size sub class B bricks staright or curved on plan to any radius in half brick walls, built in CM 1:4 complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 200 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

S & F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinge device including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed

Taking down old unserviceable WHB and S&F wash hand basin vitreous china white / ivory colour flat size 550 x 400mm ,padestal type fixed including 40 mm bore waste coupling, waste pipe complete all as specified and directed

S & F in repairs Squatting pattern Water closet, Orissa pattern of vitreous chinna Size 580x440mm wide with integral foot rest etc complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

S&F in repairs tubular towel rail aluminium anodised 20mm dia 'D' type 60cm long between flanges complete all as specified & directed.

S&F in repairs Chromium plated Angle cock 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as spd & directed

S&F in repairs Chromium plated bib taps, fancy type with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

S & F in repairs PVC cabinet of size 350 mm x 450 mm with mirror of good quality with shelves in bath fixed complete to walls complete all as directed by Engineer-in-Charge

S&F 15mm size two way bib cock of cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule.

S&F Health faucet complete all as per approved sample and directed by Engr-in-Charge

S&F Jet flush including plate & connection pipe complete all as per approved sample and directed.

S&F Toilet fittings Two way angle cock of 15 mm bore of cast copper alloy, chromium plated complete all as specified and directed by Engr-in-Charge

S&F chromium plated centre hole basin mixer w/o pop up of 15mm bore complete all as specified and directed by Engineer-in-Charge (Cat No- 8750 of Prayag / equivqlent approved by GE)

S&F CP wall mixer 3-in-1 ( with provn for OHS & hand shower) screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as ecified & directed Make - Cat No- 9380 of Prayag or their equivqlent approved by GE

S&F Corner Glass shelf with bracket as per approved sample complete all as specified and directed by Engr-in-Charge

S&F stainless steel Kitchen plate rack of overall minimum size 920mm x 785 mm and 255 mm deep, with partitions for small/large plates etc made out of stainless steel 0.50 mm thick, fixed with rawl plug and CP steel screws all as directed.Note : Weight of rack shall not be less than 7.00 Kg.

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.

All as per srl item No. 48.00 above but 20 mm bore pipe.

All as per srl item No. 48.00 above but 25 mm bore pipe.

S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

All as per srl item No. 51.00 above but 20 mm bore pipe.

All as per srl item No. 51.00 above but 25 mm bore pipe.

M&L PVC Nahani/Floor trap 75 mm outlet,with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) all as spd and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed

S & F factory made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed.

S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Two/Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.

S & F for 2nd class HW 35 mm thick, gauged and skeleton shutters (Three Panels), factory made open rebated and prepare to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 2009 Part-I, section 8 clause Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.

S & F in repair Steel window/Steel ventilator factory made, out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coats synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

S&F rolled mild steel work angle iron as in door frame (Chowkhats) of frame confirming to Fe-290 or Fe-165 including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board exterior grade pelaminated both side with decorative choice fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works all as spepcified and directed.

S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed.

S & F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed

S & F 75mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed

S & F 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed.

S & F 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F extruded aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as spd & directed.

M & L for for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as spd & directed.

S&F in repair fancy type 20mm dia aluminium curtain rods powder coated fixed to bracket as per sample approved by the GE, completed all as spd & directed.

S&F decorative type knobs with bracket of MS powder coated as per sample approved by the GE, fixing at end of pelmet rod complete all as spd & directed.

M & L for Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-16 complete all as specified and directed.

S&F in repairs 500 Litre capacity Rotational moulded polyethylene water storage tanks, white colour, triplee layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F in repairs 1000 Litre capacity Rotational moulded polyethylene water storage tanks, white colour, triplee layered (cylindrical vertical with closed top), hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as spd & directed.

M&L 50 mm thick sand stone slabs; set and jointed over joists etc. in CM 1:4 as in base of water tank/ manhole cover complete all as specified and directed

Taking down existing unservicable treatment of any description including cement plaster/conctrete any thickness from roof surface cleaning of roof surfaces and and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed.

M&L for screeding 10mm thick in CM 1:4 on fair faces of RCC /stone patti roof surface finished fair & even without using extra cement even complete all as spescified and directed.

M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using belown type bitumen conforming to IS-702 Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

Material and labour for 40mm thick (average consolidated thickness) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion complete all as specified and directed.

M&L for coved fillet in PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate at junction of roof & parapet wall and other vertical surfaces and surface painted with a hot paving bitumen grade 30/40 conforming to IS-73 @0.70 Kg/Sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 Ltr Sqm complete all as specified and directed

S & F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with clamps complete all as specified and as directed by the Engineer-in-Charge

S & F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge

S & F for 110mm bore PVC (SWR) junction single (Single T) equal or unequal with oval access door, complete all as specified

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified

S & F 75mm bore PVC (SWR) vent cowl, complete all as specified

Supply only stack clamp out of 50mm by 3mm flat iron and 16 mm dia round iron stays fixed to pipe of bore 110mm complete all as specified.

Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves,ceiling, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc.

Disconnecting unserviceable sub main wiring/service connection of any size and including conduit of any type and accessories and removing from site and making good the disturbed surfaces.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc.

M&L for point wiring with 1.5 Sqmm, PVC insulated, unsheathed, multi stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit 20mm dia or higher complete with all PVC conduit accessories such as socket, elbow, Modular junction box, bell mouth, reducer, bend and flexible conduit etc./ fittings ISI marked and sunk type pressed steel anodised terminal box 1.2 mm thick for moduler switch/socket fitting, brass screws and cup washers including 1.5 Sqmm multi stranded copper conductor PVC insulated green in colour as continous earth conductor connected to common earth and earth dolly with modular frame plate all accessories complete all as specified and directed for:- Make of wire- Havells/Polycab/Anchor/Finolex. Make of PVC conduit -AKG/Plaza/Kalinga

One light point/bell point controlled by one, one way switch.

One ceiling fan/exhaust fan point controlled by one, one way switch.

One three pin 5 Amp socket on same board with other switches.

One 3 pin 5 Amp socket on independent board.

One light point controlled by two Nos two way switch.

All as per item No. 99.00 here-in-before but with 2.5 Sqmm, for one 5 pin 5/15 Amp socket on independent board including 2.5 Sqmm stranded copper conductor (FRLSH) PVC insulated green in colour as continous earth conductor connected to common earth.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLSH) copper conductor cable of size 4.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non-metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 4.0 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.

S&F of sub main wiring with two runs of single core PVC insulated and unsheathed multistranded (FRLSH) copper conductor cable of size 6.00 Sqmm LT, 1100 volts grade, drawn through and including 25 mm dia or higher PVC non metallic concealed conduit with accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc. and fittings and one run of 6 sqmm single core multistranded copper conductor cable green colour as earth continuity conductor.

S&F of modular switch 1 way 6 Amp , 1 module, complete all as specified and directed. MAKE:-Havells/Anchor/Legrand

S&F modular switch 1 way 16Amp, 1 module, complete all as specified and directed.MAKE:-Havells/Anchor/Legrand

S&F modular switch 2 way 6 Amp, 1 module complete all as specfied and directed.MAKE:-Havells/Anchor/Legrand

S&F modular bell push, 6 Amp, 1 module, complete all as specified and directed MAKE:-Havells/Anchor/Legrand

S&F modular socket 6Amp, 2/3 pin combined 2 module complete all as specified and directed.MAKE:-Havells/Anchor/Legrand

S&F mdoular socket 6Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. MAKE:-Havells/Anchor/Legrand

S&F modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed. MAKE:-Havells/Anchor/Legrand

S&F ceiling rose, surface type bakelite 65x17.5mm, three terminals, complete all as specified and directed. MAKE:-Havells/Anchor/Legrand

S&F door bell ding dong type type electric 230 volts AC , single phase, complete all as specified and directed. MAKE:-Havells/Anchor/Legrand

S&F lamp holder PVC/polycarbonate type with back plate complete all as speciied and directed by Engr-in-Charge. MAKE:-Havells/Anchor/Legrand

S&F LED tube light fitting in acrylic linear tube (1x 18 watt),230V for single LED tube light including 1 x 18 W LED retrofit bar professional CW 6500 K cover channel, bipin holders,LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with three core flexible copper conductor cable with suitable size for connection of fitting from ceiling rose complete all as specified and directed. Make Havells Cat part NoPHOTONULTRA2.01212T8SSTL20WLED 865SPC (for tube) REGALBATTENT8UPTO1X22WDSBSWH (for batten)Bajaj Cat Part No BLRB 18W CWc for tube , BLRB - DB 118 for batten , or equivalent model of Philips/Crompton

S&F LED mirror light fitting 10 Watt sleek polycarbonate channel with white acrylic cover complete with all accessories pre-wired and including connecting flexible copper conductor cable with suitable size.

S & F wall mounted decorative luminarie fitting with brass made bracket with 115mm dia round base , brass arm length 57mm , provided with 78mmx 76mm breadth gallary , indiside 2 pin brass holder, frosted glass shade 170 mm length incl LED lamp 5 watt complete all as specified and directed.Make Mepro Cat Part No. MBBS-802 or equivalent model of Havells/Bajaj

S&F LED mirror light fitting 1x 10 Watt sleek polycarbonate channel with white acrylic cover complete with all accessories pre-wired and including connecting flexible copper conductor cable with suitable size complete all as specified and directed Make Havells/Bajaj/Osram

S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge. Make Bajaj/Havells/CG

Supply and fixing surface mounting LED down lighter 13.5 watt round shaped for diffused lighting complete all as specified and directed. Make Havells Cat Part No LHEXCFP71N5W013 or equivalent model of Bajaj/Crompton/Syska

Supply and fixing testing and commissioning energy saving street light luminaire 35 watt LED , pressure die cast housing with epoxy powder coated with colour finish and prismatic poly carbonate coverlic cover complete with individual LED lences and complete all as specified and directed..

Supply and fixing street light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed.

Disconnecting and taking down existing electric meter and refixing the same electric meter, connecting, testing and sealing properly and making good disturbed surface of walls etc.

Taking down ceiling fan 1200/1400 mm sweap and dismantliing of fan blade and refixing on its original position after cleaning porperly incl provn of nut, bolts and rubber reel and conecting with three core copper conductor flexible wire from ceiling rose to conector of fan complete all as specified and directed

S&F MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door IP-43 DB's , made out of sheet steel enclosure, recessed type, factory made powder coated 8 way, 240 volts suitable for housing MCB's including blanking plate complete all as specified and directed.Make: Legrand/Schneider/Seimens Note: MCB DB and MCB SP/SPN will be of same make.

S&F Sheet metal enclousers made out of CRCA mild steel sheet, , powder coated vertical DB TPN 8 way 415 Volt, dust and vermin proof suitable MCCB 250 Amps + 12 modules, 4 pole and ELM as incomer and SP/TP MCB'S as outgoing complete all as specified & directed. Make:Havells/ Legrand/Schneider/Seimens

S & F MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S & F MCB SPN, 240 volt, 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed by Engr-in-Charge by Engr-in-Charge. Make : Legrand (DX-3), Schneider (Acti-09), Siemens ( Betagard)

S&F MCCB 415V 3 phase 50 HZ 4 pole 125 Amps breaking capacity 16 KA Make:Havells/ Legrand/Schneider/Seimens

S & F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series for geyser complete all as specified and directed Havells/ Legrand/Schneider/Seimens

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and other end of earth wire connected to main switch board and protected by galvanised iron pipe light grade 15mm bore and water pipe 20 mm bore GI med grade with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover with handle all as specified and shown in elect plate No 3 of SSR Part-I incl dismantling of old unsv existing earthing .

Taking down geyser any capacity and refixing the same after completion of plastering including provision of nuts and bolts complete all as specified and directed.

Supply and fix Exhaust Fans AC single phase 230/240 volts of size 300 mm sweep metal body with louver shutter including making holes for fixing of fan and making good the distrubed surface connecting with three core flexible copper wire from ceiling rose to connector of fan complete all as specified and directed. Make Havells model ventil air DB or equivalent model Bajaj/ Usha

S&F of ventilatiion fan 250 mm sweep PVC body with louver shutter suitable for 230 volts, single phase 50 hz Ac supply , connecting with three core flexible copper cable including making hole for fixing of fan and making good the distrubed surface of wall complete all as specified and directed.Make Havells model ventil air DX white or equivalent model Bajaj/ Usha

Supply and, laying, including jointing, testing or fixing or passing through pipe, trench or duct, commissioning and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 Volt grade size 25 Sqmm, 4 core complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth and getting out complete all as specified and directed.

M&L for filling clean and dry sand cushioning for cable in trenches all as specified and directed.

Returning, filling in , including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and directed

Removal of surplus soil as obtained from excavation to a distance not exc. 50 Mtr and depositing where directed at a level not exc. 1.5 Mtr above the starting point all as specified and directed.

Supply and laying of bricks old class ‘B’ as protect on to UG cable laid flat adjoining to each other width wise all as specified.

Supply and fixing tubes light grade GI tubing 40 mm dia with all fitting laid in trenches complete all as specified and directed.

M & L for preparation of new plastered surfaces and applying two coats of exterior weather paint over a coat of alkali resistant primer complete all as specified and directed. Make :- Asaian/Apex/Berger (Weather coat all guard)

M & L for preparation of old decorated plastered or unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

S&F CP overhead shower with brass arm and flange and fixed for 15mm bore pipe complete all as specified and directed. Make :- Cat part No. BS-79S of Prayag and eqievalent make and model as approved by AO.

S&F CP hand shower ABS shower with 1.5Mtr flexible tube and hook and fixed to wall mixer complete all as specified and directed. Make :- Cat part No. BH-79 of Prayag and eqievalent make and model as approved by AO.

S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

M&L double action spring hinges mild steel ith steel wire spring stove enameled black ISI marked of size 100 mm complete all as specified and directed.

M & L for ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the complete Roof slab at least for 72 hrs complete all as specified and directed.

M/s S. K. Construction Co.

Shree Sai Ram Enterprises

ANAM BUILDCON

M/s Jai Jinendra Constructions

M/S AL ASMA ENTERPRISES

M/s SUNIL ENTERPRISES

SHREE BALAJI TRADING CORPORATION

kirtiman traders