Repairs and Maintenance of Snow Machine No. Guru I, Ashok Leyland Stallion, TATA LPT-715 (M/C 72 and 49) of Snow Clearance Control Room Kulgam.

Amount

GURU 1st

Fixing of cutting edges to the fixed snow plough. The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter. The job further includes drilling of 16 No holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 16 no. nuts bolts M18 of 80 mm. long.

Providing and Fitting of Engine Oil Filter and fuel filter as per sample and as recommended by OEM.

Providing and Fitting of Siren for Guru-I as per sample

Light Check up.the Job includes Providing and Fitting of fused lamps.

Four wheel checking and hub greasing of model 4*4 ashok leyland GURU by way of : 1. removing of tyres, wheel hub, brake drum, bearings both inner and outer, and all fixtures of hub assembly. Washing and cleaning of all the parts using HSD. 2. checking bearings, brake shoes, and all related parts for defects if any. 3. replacement of oil seals. 4. greasing of bearings and hub and reassembling of the complete unit.

ASHOK Leyland STALLION, NEW

Fixing of cutting edges to the variable snow plough.The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter.The job further includes drilling of 22 No. holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 22 No. nut bolts M18 of 80 mm long.

Providing and Fitting of Engine Oil Filter and fuel filter as per sample and as recommended by OEM.

Four wheel checking and hub greasing of model 4*4 ashok leyland stallion new by way of : 1. removing of tyres, wheel hub, brake drum, bearings both inner and outer, and all fixtures of hub assembly. Washing and cleaning of all the parts using HSD. 2. checking bearings, brake shoes, and all related parts for defects if any. 3. replacement of oil seals. 4. greasing of bearings and hub and reassembling of the complete unit.

Tie rod checking. The job includes removing of tie rod for correcting the defects if any and resembling/fitting of the complete unit.

Light Check up. Job includes Providing and Fitting of lamps.

M/C 72 (TATA LPT 715)

Repairs to the variable plough assembly. The job includs dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged/ cracked spots

Fixing of cutting edges to the variables now plough.The job includes removing of the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter.The job further includes drilling of 18 No. holes on the new cutting edges in accordance with the holes on the base of the snow plough. The job also includes providing and fitting of 18 no. nut bolts M18 of 80 mm long.

Four wheel checking and hub greasing of model 4*4 TATA LPT 715 by way of : 1. removing of tyres, wheel hub, brake drum, bearings both inner and outer, and all fixtures of hub assembly. Washing and cleaning of all the parts using HSD. 2. checking bearings, brake shoes, and all related parts for defects if any. 3. replacement of oil seals. 4. greasing of bearings and hub and reassembling of the complete unit.

Providing and Fitting of Engine Oil and fuel filter Filteras per sample and as recommended by OEM.

Light Check up. Job includes Providing and Fitting of fused lamps.

Providing and fitting of hydraulic jack kit for snow machine.

M/C-49 (TATA LPT 715)

Repairs to the variable plough assembly. The job includs dismounting of the plough from the machine and removing of bends by heating, pressing, hammering and welding at damaged/ cracked spots.

Fixing of cutting edges to the variable snow plough. The job includes removing off the worn-out cutting edges and then cutting/ trimming of the new cutting edges as per plough profile by using a gas cutter.The job further includes drilling of 20 No. holes on the new cutting edges in accordance with the holes on the base ofthe snow plough. The job also includes providing and fitting of 20 No. nut bolts M18 of 80 mm long.

Four wheel checking and hub greasing of model 4*4 TATA LPT 715 by way of : 1. removing of tyres, wheel hub, brake drum, bearings both inner and outer, and all fixtures of hub assembly. Washing and cleaning of all the parts using HSD. 2. checking bearings, brake shoes, and all related parts for defects if any. 3. replacement of oil seals. 4. greasing of bearings and hub and reassembling of the complete unit.

Providing and Fitting of Engine Oil Filter and fuel filter as per sample and as recommended by OEM.

Light Check up. Job includes Providing and Fitting of lamps.

M/S MARTAND TRADERS (BID ID -2250844)