SPL REPAIR / REPLACEMENT OF PUMP MOTORS AGAINST BER OF VARIOUS CAPACITY AT CERTAIN PLACES BAMBOLIM, MADGAON AND PONDA UNDER GE PANAJI GOA

Supplying, installing, testing and commissioning 25 HP monoblock pump KDI -2560+SSIMS IP55 FCL suction and delivery size 100 mm X 80 mm, 2930 RPM, Head range 65m with CI impeller, CI casing and CS shaft with energy efficient level 2, induction motor conforming to IS:12615, capacity suitable for working voltage 415 volts, 3 phase, 50 Hz, including all necessary electric connection from starter to pump including 3 core multi standard copper conductor of size 25 sqmm of 10 running metre with lugs complete all as specified and as directed.

Supplying, installing, testing and commissioning 15 HP monoblock pump single stage,KDT-CI Series water dischargeflow rate 11.3-3.2LPS suction delivery size 65 mm X 65 mm, 3000 RPM,MB/MI series Head Range- 51-72 Mtr with CI impeller, CI casing and CS shaft with energy efficient level 2, induction motor conforming to IS:12615, capacity suitable for working voltage 415 volts, 3 phase, 50 Hz, including all necessary electric connection from starter to pump including 3 core multi standard copper conductor of size16sqmm of 10 running metre with lugs complete all as specified and as directed.

Supplying, installing, testing and commissioning125 mm bore 10 HP submercible pump set delivery size 40 mm 2900 RPM, Head range 75 m with CI impeller, CI casing and CS shaft with energy efficient level 2, induction motor conforming to IS:12615, capacity suitable for working voltage 350-440 Volts , 3 phase, 50 Hz, including all necessary electric connection from starter to pump including 3 core multi standard copper conductor of size10 sqmm of 10 running meter with lugs,clamps complete all as specified and as directed.

Supplying, installing, testing and commissioning Bore size125 mm series 7.5 HP submercible pump set delivery size50mm 2900 RPM, Head range 32-66 mtr stagewith CI impeller, CI casing and CS shaft with energy efficient level 2, induction motor conforming to IS:12615, capacity suitable for working voltage 350-440 Volts , 3 phase, 50 Hz, including connection of starter, including all necessary electric connection from starter to pump including 3 core multi standard copper conductor of size 6 sqmm of 10 running meter with lugs,clamps complete all as specified and as directed.

Supplying, installing, testing and commissioning Bore size125 mm series 5 HP submercible pump set delivery size50mm 2900 RPM, Head range 20-41 mtr 5 stage with CI impeller, CI casing and CS shaft with energy efficient level 2, induction motor conforming to IS:12615, capacity suitable for working voltage 350-440 Volts , 3 phase, 50 Hz, including all necessary electric connection from starter to pump including 3 core multi standard copper conductor of size 4 sqmm of 10 running meter with lugs ,clamps complete all as specified and as directed.

Supplying, installing, testing and commissioning Bore size125 mm series 5 HP submercible pump set delivery size50mm 2900 RPM, Head range 65-330 mtr 5 stage with CI impeller, CI casing and CS shaft with energy efficient level 2, induction motor conforming to IS:12615, capacity suitable for working voltage 350-440 Volts , 3 phase, 50 Hz, including connection of starter, including all necessary electric connection from starter to pump including 3 core multi stranded copper conductor of size 4 sqmm of 10 running metre with lugs, clamps complete all as specified and as directed.

Disconnection of submersible pump set of any size from existing system water supply & electrical and Taking out /Uplifting the U/S pump set from deep borewell with disconnected from lowering pipe line of any size with manual or suitable electric driven chain pully upto 420 ft depth and lowering the new submercible pump set in same borewell complete all as specified and directed. Note:- i) pump motor/submercinle pump set will be paid separately. (ii) All type of T/P such as chain pully required to complete the job will be arranged by contractor. (iii) Job will be done round -o-clock continued as per site requirement as directed by AGE. (iv) Delay in job will be charged on the basis of Rs. 500/- per hour. (v) Items required for motor connection such as PVC insulation tape, valcanised rubber / puncture tube etc will be provided by the contarctor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be made to the contractor.

Disconnection of centrifugal/ monoblock pump set of any size from existing system water supply & electrical and Taking out /Uplifting the U/S pump set from pump house,etc with disconnected from lowering pipe line and lowering the new centrifugal pump set in same pump house complete all as specified and directed. Note:- i) pump motor/submercinle pump set will be paid separately. (ii) All type of T/P such as chain pully required to complete the job will be arranged by contractor. (iii) Job will be done round -o-clock continued as per site requirement as directed by AGE. (iv) Delay in job will be charged on the basis of Rs. 500/- per hour. (v) Items required for motor connection such as PVC insulation tape, valcanised rubber / puncture tube etc will be provided by the contarctor to complete the work and rate as deemed to be quoted in unit rate no extra payment will be made to the contractor.

S&F of submersible flat copper stranded cable 1100 Volt grade of size 4sqmm 3 core complere all as specified and directed.

S&F of submersible flat copper stranded cable 1100 Volt grade of size 6 sqmm 3 core complere all as specified and directed.