Construction of 200 mm Dia. Production Bore Wells by ODEX Method for 89 Water Supply Schemes (180 no. Bore Wells) of District Kathua of JAMMU Province

Amount

Deep Drilling and Development of 05 Nos 200mm dia. Bore Wells by ODEX Method at (i) Gurah Kalyal East & West-I (ii) Gurah Kalyal East & West-II (iii) Gurah Kalyal East & West-III (iv) Gurah Kalyal East & West-IV (v) Gurah Kalyal East & West-V in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 05 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 05 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dhannuparole-I (ii) Dhannuparole-II (iii) Dhannuparole-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dhana-I (ii) Dhana-II (iii) Dhana-III in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Gandyal-I (ii) Gandyal-II (iii) Gandyal-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Kohag & Lahari-I (ii) Kohag & Lahari-II (iii) Kohag & Lahari-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Mehtabpur-I (ii) Mehtabpur-II (iii) Mehtabpur-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Najote & Nangalla-I (ii) Najote & Nangalla-II (iii) Najote & Nangalla-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Sialiana-I (ii) Sialiana-II (iii) Sialiana-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Thara Kalwal-B-I (ii) Thara Kalwal-B-II (iii) Thara Kalwal-B-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Thein-I (ii) Thein-II (iii) Thein-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Aglidhar-I (ii) Aglidhar-II (iii) Aglidhar-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 05 Nos 200mm dia. Bore Wells by ODEX Method at (i) Mirpur Ram-I (ii) Mirpur Ram-II (ii) Mirpur Ram-III (iv) Mirpur Ram-IV (v) Mirpur Ram-V in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 05 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 05 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Amwala-I (ii) Amwala-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Rampur-I (ii) Rampur-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Barota-I (ii) Barota-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Bhaddu-I (ii) Bhaddu-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02Nos 200mm dia. Bore Wells by ODEX Method at (i) Chunnera-I (ii) Chunnera-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Chack Gota-I (ii) Chack Gota-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dambra West-I (ii) Dambra West-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Danjasdhar-I (ii) Danjasdhar-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Rajwalta-I (ii) Rajwalta-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Bhaddu Lower-I (ii) Bhaddu Lower-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 04 Nos 200mm dia. Bore Wells by ODEX Method at (i) Chingi Makwal-I (ii) Chingi Makwal-II (iii) Chingi Makwal-III (iv) Chingi Makwal-IV) in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 04 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 04 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Drung-I (ii) Drung-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Mahanpur-B-I (ii) Mahanpur-B-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dhalta (ii) Arnoha in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dhandwal (ii) Thuthe Chak in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Moh. Bilndli, Dukhat-I (ii) Moh. Bilndli, Dukhat-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Domar-I (ii) Domar-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dorsi-I (ii) Dorsi-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Hote-I (ii) Hote-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Kah-I (ii) Kah-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Kandhrnoo-I (ii) Kandhrnoo-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 04 Nos 200mm dia. Bore Wells by ODEX Method at (i) Narolian Bajawal-I (ii) Narolian Bajawal-II (iii) Narolian Bajawal-III (iv) Narolian Bajawal-IV) in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 04 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 04 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Kenta-I (ii) Kenta-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Rajwalta-I (ii) Rajwalta-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Keerian-I (ii) Keerian-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Kharote-I (ii) Kharote-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Lakhri-I (ii) Lakhri-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Ludera & Dramani-I (ii) Ludera & Dramani-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Mandli-I (ii) Mandli-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Mara Patti-I (ii) Mara Patti-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Nowshera-I (ii) Nowshera-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Niryali & Harnota-I (ii) Niryali & Harnota-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 04 Nos 200mm dia. Bore Wells by ODEX Method at (i) Thara Kalwal-A-I (ii) Thara Kalwal-A-II (iii) Thara Kalwal-A-III (iv) Thara Kalwal-A-IV in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 04 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 04 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dhamlar-I (ii) Dhamlar-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Pallan & Dharlta-I (ii) Pallan & Dharlta-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Parnalla-I (ii) Parnalla-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Plail-I (ii) Plail-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Phalote-I (ii) Phalote-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Ramkot-I (ii) Ramkot-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Rassoh-I (ii) Rassoh-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Sawla-I (ii) Sawla-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Salore-I (ii) Salore-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Kattal-I (ii) Kattal-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 04 Nos 200mm dia. Bore Wells by ODEX Method at (i) Taraf Bala-I (ii) Taraf Bala-II (iii) Taraf Bala-III (iv) Taraf Bala-IV in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 04 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 04 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Tehr-I (ii) Tehr-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Tridwan-I (ii) Tridwan-II in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Thmnal-I (ii) Thmnal-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Uchapind-I (ii) Uchapind-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dharalta-I (ii) Dharalta-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 02 Nos 200mm dia. Bore Wells by ODEX Method at (i) Upper Dungara-I (ii) Upper Dungara-II in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 02 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 02 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Pallan in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Bhakta in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Chadwal & Chan Dityal in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Chandwan in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Basantpur-I (ii) Basantpur-II (iii) Basantpur-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Dhar Mahanpur in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Dharamkot in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Dilwan in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Galli - Duggain in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Bathri in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Goond in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Hatli in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Jakhbar in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Kathera in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Khaniyara in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Chack Sajan-I (ii) Chack Sajan-II (iii) Chack Sajan-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Khokhyal in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Kindli in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Komala & Bardahat in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Lower Dungara in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Mangtian in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Pheru Chak in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Porth in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Roukhala & Khattriala in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Mahanpur-B in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 01 No. 200mm dia. Bore Well by ODEX Method at Seswan in Kathua District under JJM

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 01 No.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 01 No.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

Description of Work / Item(s)

Amount

Deep Drilling and Development of 03 Nos 200mm dia. Bore Wells by ODEX Method at (i) Dambra East-I (ii) Dambra East-II (iii) Dambra East-III in Kathua District under JJM.

Setting up of drilling site by way of shifting of requisite machinery and allied material after making proper approaches as per requirement at site.

Boring/drilling 200mm dia. Bore Well, 120 meter below ground level or till sufficient aquifer Zone/discharge is encountered, by using ODEX Method of drilling and simultaneously driving of 200mm dia. ERW casing pipe after providing fixing of casing drive shoe with first 200mm dia. ERW casing pipe, complete, as per IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge. (ERW casing pipe shall be paid separately) (No. of bore wells under the WSS = 03 Nos.)

Supplying, assembly (including welding), lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel beveled ended 200mm dia. casing pipes, conforming to IS: 4270 of reputed and approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire and labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. Detail of specification of pipe is reflected at Annexure “A”. The cost includes transportation, loading, unloading and stacking/handling at site all complete. (No. of bore wells under the WSS = 03 Nos.)

Development to tube well in accordance with IS: 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till Well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level &draw down etc. by step draw down method collecting water samples and getting tested in approved laboratory, I/C disinfection of tube well, all complete including required hire and labour charges of air compressor tools and accessories, etc. all, as per direction of Engineer-in-charge.

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Expert Drillers

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Expert Drillers

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Hyper Techno Drillers Private LTD

Expert Drillers

Friends Tubewell

SUPER DRILLERS

Sony Drilling Engineers

R D Singh and Co

SUPER DRILLERS

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Expert Drillers

Hyper Techno Drillers Private LTD

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Hyper Techno Drillers Private LTD

Expert Drillers

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Hyper Techno Drillers Private LTD

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Hyper Techno Drillers Private LTD

Friends Tubewell

R D Singh and Co

Expert Drillers

Hyper Techno Drillers Private LTD

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

SUPER DRILLERS

Friends Tubewell

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

SUPER DRILLERS

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Friends Tubewell

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Hyper Techno Drillers Private LTD

R D Singh and Co

SUPER DRILLERS

Friends Tubewell

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Hyper Techno Drillers Private LTD

R D Singh and Co

Shri MahaLakshmi Rigs

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Hyper Techno Drillers Private LTD

Expert Drillers

Sony Drilling Engineers

R D Singh and Co

SUPER DRILLERS

Hyper Techno Drillers Private LTD

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Sony Drilling Engineers

R D Singh and Co

Expert Drillers

SUPER DRILLERS

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Sony Drilling Engineers

R D Singh and Co

SUPER DRILLERS

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Friends Tubewell

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Sony Drilling Engineers

Expert Drillers

Hyper Techno Drillers Private LTD

R D Singh and Co

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Hyper Techno Drillers Private LTD

Friends Tubewell

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Hyper Techno Drillers Private LTD

Expert Drillers

Friends Tubewell

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

SUPER DRILLERS

Friends Tubewell

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Hyper Techno Drillers Private LTD

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

SUPER DRILLERS

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

SUPER DRILLERS

Hyper Techno Drillers Private LTD

Expert Drillers

Sony Drilling Engineers

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

Expert Drillers

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Expert Drillers

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

SUPER DRILLERS

Expert Drillers

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

Expert Drillers

R D Singh and Co

SUPER DRILLERS

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Shri MahaLakshmi Rigs

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Hyper Techno Drillers Private LTD

Expert Drillers

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

SUPER DRILLERS

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Sony Drilling Engineers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

SUPER DRILLERS

Shri MahaLakshmi Rigs

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

Expert Drillers

Shri MahaLakshmi Rigs

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Hyper Techno Drillers Private LTD

SUPER DRILLERS

Sony Drilling Engineers

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

R D Singh and Co

SUPER DRILLERS

Expert Drillers

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Sony Drilling Engineers

R D Singh and Co

Expert Drillers

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

Expert Drillers

R D Singh and Co

SUPER DRILLERS

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

R D Singh and Co

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

SUPER DRILLERS

Sony Drilling Engineers

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Hyper Techno Drillers Private LTD

R D Singh and Co

Shri MahaLakshmi Rigs

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Hyper Techno Drillers Private LTD

SUPER DRILLERS

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Shri MahaLakshmi Rigs

Hyper Techno Drillers Private LTD

Expert Drillers

Friends Tubewell

SUPER DRILLERS

Sony Drilling Engineers

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Sony Drilling Engineers

Expert Drillers

Hyper Techno Drillers Private LTD

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Hyper Techno Drillers Private LTD

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Friends Tubewell

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Sony Drilling Engineers

SUPER DRILLERS

Hyper Techno Drillers Private LTD

Expert Drillers

R D Singh and Co

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

Hyper Techno Drillers Private LTD

SUPER DRILLERS

Shri MahaLakshmi Rigs

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Friends Tubewell

R D Singh and Co

Expert Drillers

SUPER DRILLERS

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

R D Singh and Co

Hyper Techno Drillers Private LTD

SUPER DRILLERS

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

SUPER DRILLERS

Shri MahaLakshmi Rigs

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

SUPER DRILLERS

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

Expert Drillers

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Hyper Techno Drillers Private LTD

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Hyper Techno Drillers Private LTD

Expert Drillers

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Hyper Techno Drillers Private LTD

Friends Tubewell

R D Singh and Co

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Expert Drillers

R D Singh and Co

SUPER DRILLERS

Hyper Techno Drillers Private LTD

Shri MahaLakshmi Rigs

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Friends Tubewell

R D Singh and Co

Shri MahaLakshmi Rigs

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Hyper Techno Drillers Private LTD

Expert Drillers

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

R D Singh and Co

SUPER DRILLERS

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Hyper Techno Drillers Private LTD

Friends Tubewell

Expert Drillers

Sony Drilling Engineers

R D Singh and Co

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

SUPER DRILLERS

Friends Tubewell

Expert Drillers

Hyper Techno Drillers Private LTD

R D Singh and Co

Shri MahaLakshmi Rigs

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Expert Drillers

Hyper Techno Drillers Private LTD

R D Singh and Co

Shri MahaLakshmi Rigs

Hyper Techno Drillers Private LTD

SUPER DRILLERS

Friends Tubewell

Expert Drillers

Sony Drilling Engineers

R D Singh and Co

Hyper Techno Drillers Private LTD

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Expert Drillers

SUPER DRILLERS

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Expert Drillers

Shri MahaLakshmi Rigs

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Friends Tubewell

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Friends Tubewell

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Hyper Techno Drillers Private LTD

Expert Drillers

Sony Drilling Engineers

R D Singh and Co

Shri MahaLakshmi Rigs

Sony Drilling Engineers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

R D Singh and Co

Hyper Techno Drillers Private LTD

SUPER DRILLERS

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

Hyper Techno Drillers Private LTD

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

R D Singh and Co

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Expert Drillers

Friends Tubewell

Hyper Techno Drillers Private LTD

Sony Drilling Engineers

R D Singh and Co

Expert Drillers

M/S SHREE BAJRANG BALI CONTRACT COMPANY

Shri MahaLakshmi Rigs

Friends Tubewell

Sony Drilling Engineers

Hyper Techno Drillers Private LTD

R D Singh and Co