Repair Replacement of certain wood and steel furniture and polishing of wooden furniture at AF Stn Singarsi under AGE I AF Singarsi

Amount

M&L for two coats of french polishing inside out side surfaces incl cleaning of old polishwith wooden scrapers and sand papers bore holes to be fill with putting of the furniture woth glossy finish all as shown in drg and directed by Engr-in-Charge.

Peg Table

Table wiriting med

Almirah large with shelves

Tea pay Garden

Teapoy.

Table Centre.

Board notice 5' x 5'.

Book case library pattern.

Box kit wooden.

Locker bed side.

Rack side four spaces.

Rack store 3 tire.

Rack 4 tire 5' x 5'.

Rack 6 tire 8' x 6'.

Rack pegion hole 6' x 3' x 1'.

Stool 2' x 1'.

As above but 3' x 4'.

Table office for officers.

Table office clerk.

Table on pieces W/o drawers all purpose.

Table bed side.

Table dressing with mirror Gents.

Table dressing with mirror ladies.

Chair dining.

Cap stand with mirror.

Bin solid linon.

Side board.

Bed ply wood top .

Sofa set two seated.

Sofa set Single seated.

Sofa set Three seated.

S&F with new top made of pre laminated particle borade 18 mm thick. 4 mm teak wood beads to be provided all round the top incl cleaning and removing old paint at steel surfaces and spray painting with two coats of OG paint ober a coat of red oxide primer incl removing of old UNSV Top from table trestle 5'x2'-6" and all as per shown in drg and direced by EIC.

All as per item 2 above but table office steel with drawers 45"x24".

All as per item 2 above but table office steel 54"x30".

All as per item 2 above but table office officers steel 1370x760x750 mm.

All as per item 2 above but table steel typist with drawers 1200x600x750 mm.

Table Dressing Ladies M&L for removing of the existing foggy/clipped mirror of table dressing ladies and replacing the same with new mirror not less than 5.5 mm thick and side 380x760mm and fixing on the existing frame all as shown on drg and as specified and directed by EIC.

M&L for removal of the existing damaged/unserviceable single drawer of the table dressing ladies and replacing with new drawer with front , side and bottom made of 12 mm thick preleminated particle board exterior grade BWR with teak finish on one side with a 22 mm dia best quality knob for back side all as shown on drg and as specified and direced by EIC.

M&L for removal of the existing damaged plyoood of the mirror of table dressing ladies and replacing with new 6 mm thick (5no ply) 366x 1220 mm size commercial plywood (BWR) all as shown on drg and as specified and directed by EIC.

Removing of unserviceable plastic cane from various types of wooden furniture items and re canning the same with new plastic cane 2 mm to 2.5 mm wide oval shape superior quality and white in colour for seat and back speciallly for chairs beading shall be provided with 4 mm wide oval shape plastic cane all canning works will be as specified in drawings for the following chair CBB steel (seat & back) chair CAB steel (Seat & back) chair writing CBA wooden(Seat & Back) chair dining CBB/CBW/O arm (Seat only) chair easy (Seat & back) chair NF (Seat & Back) & stool dressing (drg No FD -75,FD250, FD-228, FD-229, FD-201, FD-252, FD-374, & DB-3969).

M&L for top of GI 32 mm bed with 12 mm thick 7 nos ply (commercial type plywood) phenol bonded BWR grade, preservative treated termite resistant and confirming to Is 303 duly fixed on the top with 35mm steel bolt and nut with washers both side after removing of old existing broken/damaged plywood top from the bed frame all as per drg and specified by EIC.

M&L for top of Bed hard with 12 mm thick 7 nos ply (commercial type plywood) phenol donded BWR grade, preservative treated termite resistant and confirming to IS 303 duly fixed on the top with 35mm wooden screw after removing of old existing broken/damaged plywood top from the bed frame all as per drg and specified by EIC.

M&L for removal of the exisiting damaged top of teapoy verandah and replacing the same with new top made out of 900 x 450 mm size, 18 mm thick pre laminated particle board white finish on top with first clas teak wood edging 3 mm thick all sides duly fixed to the cconduit frame with screws from below the conduit incl french polising TW edging and fixed with U shape MS tubing painted with two coat of white enammel paint complete all as shown in drg and specified and directed by EIC.

M&L for removal of the existing damaged top of peg table and replacing the same with new top 18 mm thick pre laminated particle board 450 x 300 mm size with one side decorative teak finish incl 18 mm wide, 4 mm thick teak wood edging as shown in the drg and as specified and directed by EIC.

M&L for removal of the existing damaged any one leg of peg table and replacing the same with new led 362 mm long X 30 x 50 mm first class hard wood (Teak) and all exposed surfaces french polished and fixed all as shown in drg and as specified and directed by EIC.

P .BANERJEE AND CO

M/S Subhadip Enterprise

M/S MBS TRADING CO