PROVISION OF PERIMETER CHAINLING FENCING WITH CONCERTINA COIL, GATES AND LIGHTING ARRANGEMENTS AT TIMBER POUND BOAT BASIN AREA AT CHENNAI

Amount

Schedule "A" Part – I to Schedule "A" Part – XVII: NOTE: Schedule "A" Part – I to Part – XIV EXCEPT Schedule "A" Part –IIA , Schedule "A" Part – XV, Schedule "A" Part –XVI and Schedule "A" Part –XVII are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only Contractor shall insert their rates for Schedule "A" Part –IIA Schedule "A" Part – XV, Schedule "A" Part –XVI and Schedule "A" Part –XVII under Green coloured field under Column - 6 only

B/R SCHEDULE

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and as directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

M&L for Plain cement concrete Type B2 1:2:4 (40mm graded aggregates) in foundation walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

M & L for mild steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for GI concertina coil punched type zinc coated 610mm dia, zinc coated, stretchable to 6m length which cover the area of 50nos of spiral turns made out of 2.60mm thick coil having blade of size 050mm thick and 19mm long as in fencing to steel post including fixing with special galvanised fasteners such as J clips, C clips and U clips as fixed complete all as specified and as directed.

Supply and fix in PVC coated Chain link MS galvanised fencing (twisted type) of pitch 50mm x 50mm and wire 4mm dia fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S & F in Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

M&L mild steel for Round bars of 10mm dia (Fe -410-W-(Gde-E-250) quality A) and over cut to length bent to shape required including cranking bending spirally for hooping for bracing to chainlink fencing, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fix for 5 to 10mm dia neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc 10cm complete all as specified and as directed.

Preparation of new painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying two coats of Anti-corrosion paint over a coat of Zinc oxide primer complete all as specified and as directed.

Preparation of new painted steel or iron surfaces as of any description under 10 cm in width or girth not otherwise described and applying two coats of Anti-corrosion paint over a coat of Zinc oxide primer complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide & n.exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. Nexc10 sqm on plan & n exc 1.5m in depth & getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches, n.exc 1.5m wide & n.exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. Nexc10 sqm on plan & n exc 1.5m in depth & getting out in soft/loose soil complete all as specified and as directed.

Providing formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter in flat with rough finished surfaces complete all as specified and as directed.

Providing formwork to sides of pillars, posts struts, piers, columns and stanchions in circular on plan for fair finished surfaces complete all as specified and as directed.

RCC M-30 (20mm graded aggregate) in foundations, including rafts, footings, foundation beams, plinth beams bases for columns, etc., basement slabs under reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-30 (20mm graded aggregate) columns pillars, piers, post and struts complete all as specified and as directed.

M&L for TMT CRS bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securig with clips complete all as specified and as directed.

M&L for TMT CRS bars of 5mm dia nd over upto and including 10mm in stirrups spacers and bindgs cut to length bent to shaps required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel framed work for gates such as grills, gratings, etc., with end of bar shoulder & or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing , frame work of water tanks & similar work conforming to Fe290 GDE-E-165 and extra only over for portion framed & hung as gates, including pintle hinges, stop, hand made sliding bolts, etc. including for ornamental & intricate design complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

M&L for Brick work with old size fly ash bricks, straight or curved on plan exc 6m mean radius and built in cement mortar 1:6 all as specified and as directed.

M&L 15mm thick plastering in CM 1:6 on fair faces of brick surface and finish the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for backing coat in CM 1:4, 10 mm thick over concrete/brick surfaces finished to receive granite/wall tiles complete all as specified and as directed.

M&L 12mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and as directed.

M&L preparation of new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and as directed.

Demolition of PCC in ground floor and paving not exc 15 cm thick (below or above ground level) etc all as specified and directed.

M&L hardcore of guage exc 63mm, broken stone aggregate deposited, spread & leveled in layers not exc 15cm thick, watered & rammed to a true surface complete all as specified and as directed.

M&L for Plain Cement concrete type B-1, 1:4:8 (40 mm grade aggregate) 100mm thick in floors complete all as specified and as directed.

M&L for Plain cement concrete type B-1 1:2:4 (20mm graded aggregate) 100mm thick and finishing with brooming complete all as specified and as directed.

Removing demolished building materials etc. to a distance of not exc 10 Km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and as directed.

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed.

E/M SCHEDULE

Supply and spread clean dry river sand in trenches including levelling, punning for cushioning of cables all as specified. Note : Punned thickness of sand cushioning shall be measured.

Supply erecting of 5Mtrs Height Galvanised street light Octagonal pole with street light fitting brackets, duly coated with 65 microns Average thickness of galvanization and Bottom 130mm, top 70mm and base plate 12mm thickness with necessary arrangements, 4 Nos of J bolt & nuts supply of 1 no of 16 A double pole MCB as incomer with neutral link complete in a proper position complete with CI base plate, finial taper plug, bolts, nuts, screws and pole cap and inclusive of two coat of aluminium paint over a coat of red oxide primer including preparing the surface all as specified and as directed (Note : earth work shall be measured and paid seperately under the respective item).

Supply and fixing LED street light fitting 36 Watt or near watt, 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant along with suitable length & size of HDPE pipe for mounting fitting complete with driver and lamp complete

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 1100 volts grade with stranded alumiuium conductor of size 16 sqmm 4core.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables ( heavy duty ) 1100 volts grade with stranded alumiuium conductor of size 10 sqmm 4core.

Supply & fixing pole mounting junction box (looping box) IP 66/67 weather proof for street light for 3 phase 4 wire system with internal size 200 x 160 x 98 mm comprising of PVC connector and one MCB SP 6 amps including mounting arrangement .

M&L for 1.5 Sqmm 3 core FRLS, PVC insulated, PVC sheathed copper conductor cable 1100 volts grade multi stranded from fitting to looping box through the existing tubing complete all as specified and directed.

Supply and fix MCB TPN 40 Amps with enclosure.

M&L Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure all as specified and directed by Engineer-in-Charge.

M & L Earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate at a depth not less than 1.5 Mtr below normal ground level surrounded from all sides by 15 cms thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including galvanised earth lead wire 4.0mm dia size upto 7.5 mtr by means of bolts, nuts, checknuts and washers made out of galvanised iron and protected by medium grade 50 mm dia 5 mtr long and connected to main control panel and GI pipe 20 mm medium grade as watering pipe including funnel, wire mesh, PCC Pit made up of PCC 1:2:4 type C2 and RCC cover 40 mm thick with 8 mm bar 15 c/c including excavation and earth work all as specified in SSR Part -1, 2010.

M&L PCC 1:2:4, type B-1, using 20 mm graded stone aggregate as in foundation/ coping of poles including demolition of existing PCC and necessary form work and finishing the exposed concrete surfaces even and fair all as specified and as directed

Supply and fix timer switches astro type (Having longitude and latitude of Indian cities in memory) 250 V single phase of 20 Amp rating with contactor fitted inside steel enclosure.

Supply & Fix High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of 50mm bore for cable protection passing under Road/Floor or for fixing to poles all as specified and directed.

M&L for 20mm dia PVC rigid non-metallic conduit pipe for drawing cables

Supply and lay fly ash bricks of size 230mmX115mmX75mm of 75Kg/sq cm to be laid on sand cushioning for protection cable.

Atish Builders LLP

lakshmibuilders

Bidder Name

lakshmibuilders

Atish Builders LLP

DANUSH INTERIORS AND CONTRACTORS