M.W. Providing Transit Accommodation for Honble L.G.s Office Old Distillery, Puducherry. S.W. Providing External Electrification works to the Transit Accommodation for Honble L.G.s Office Phase.I, Puducherry.

Amount

External Electrification Supply and erection of 11KV motorized SCADA Ready Extensible Type Ring Main Switchgear. Supply of Remote monitoring cum metering module suitable for coupling to the ring main switchgears, along with all necessary accessories like CTs/PTs, meter, complete, interpanel wiring harness, coupling materials, provision of FRTU, etc. for the following configuration of 11 KV ring main switchgear. Supply of metering CT`s and other accessories for all the modules for metering for the following configurations of 11 KV ring main switch gear. Type: Outdoor with SCADA ready rated voltage:24 KV, rated current: 630A S.T.C(Ik):21LA, Insulation of bus bar: SF6, Bus basr connections: Anti-Oxide grease. a). +CCBB+(2LBS and 2 breakers). Make:ABB/Crompton/Schneider

Supply of Metering set for HT power Supply of indoor/ outdoor 11KV METERING SET, comprising of Resin Cast CT/PT as per the specification of Electricity Department, Puducherry .

Supply and installation ,Unloading & handling, erection , testing and commissioning of outdoor type (weather proof enclosure) unitised substation comprising of 11KV, 630A vaccum circuit breaker at HT side, 11KV/433V, 315 KVA, Cast resin core dry type energy efficient Transformer - level 2 (IS:11171 & IS:2026) with Off-load tap changer and 630A four pole electrical draw out type ACB at LT side. The transformer cooling shall be of with natural air. The items including necessary fixing accessories, surge arrester with all complete as per PED standard & requirements. Make: ABB/ Crompton/ Kirloskar/ Voltamp.

Supplying of Stranded compact circular Aluminium conductor, XLPE insulated 11 KV armoured HT cable of size 3 core x 95 Sq. mm. cable, conductor screen and insulation screen with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of PVC tape, galvanised flat steel strip armoured and overall PVC sheathed cable conforming to IS 7098 (part.II)1985 with latest amendents. Make : Polycab/ Finolex / Havells/ Paragon.

Providing of foundation for outdoor 11 KV RMU.

Providing of foundation for 11 KV metering set as per the recommendation of the Pondicherry electricity Department.

Laying of one number XLPE power cable of grade 11kV/22KV of size 95 Sq.mm but not exceeding 400Sq.mm direct in ground including excavation, sand cushioning, protective covering with RCC truff and refilling the trench etc.as required

Supplying and making indoor/outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core , XLPE aluminium conductor cable of 11kV grade as required - 185 sq.mm

Providing fencing for the Outdoor substation yard with necessary gate.

Supply of 150 mm dia - S&S centrifugally Spun CI pipes IS-1536

Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20 cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50 meters.

PC 383- Supply of Potential earth electrodes, copper electrodes 38mm dia wall thickness 1.60mm, 3m long, inner space of pipe filled with high conductive material along with 2 bag(25Kg to a bag of) of earth life compound

Supplying and laying 25 mm x 5 mm copper strip at 0.50 meter below ground as strip earth electrode , including connection / terminating with nut , bolt, spring , washer etc.as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supply, erection, testing and commissioning of 125 KVA DG CPCB IV+ DG Set with standard Accessories coupled to Alternator rated 125KVA/100KW, 3 phase, 4 wire, 0.8 PF (lag), 415 V mounted on a channel iron base frame with foot mounting AVM pads, Fuel tank (In Built), Charged battery with leads, Silencer, Composite type Acoustic enclosure and Standard Control Panel.

Supply of 4 x 25sqmm armoured aluminium U.G cable - 1.1 KV grade.

Supply of 4 x 50 sqmm armoured aluminium U.G cable- 1.1 KV grade.

Supply of 3 1/2 x 95sqmm armoured aluminium U.G cable- 1.1 KV grade. Make:Finolex/Polycab

Supply and fixing of 3 1/2 x 120 sqmm PVC insulated and PVC sheathed XLPE 1.1 KV grade UG cable ISI marked (Make: Paragon/Orbit). Complete as directed by the Engineer-in- charge

Supply of 3 1/2 x 300sqmm armoured aluminium U.G cable- 1.1 KV grade. Make:Finolex/Polycab/Havells

Supply of 3 1/2 x 400sqmm armoured aluminium U.G cable- 1.1 KV grade. Make:Finolex/Polycab

Supplying and making end termination with brass compression per gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 3 X10 sq.mm (22 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X10 sq.mm (25 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X16 sq.mm (28 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 4 X25 sq.mm (28 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X25 sq.mm (28 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X35 sq.mm (32 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X50 sq.mm (28 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X70 sq.mm (38 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X95 sq.mm (45 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X120 sq.mm (45 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X150 sq.mm (50 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X185 sq.mm (57 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X240 sq.mm (62 mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required - 31/2 X400 sq.mm (82 mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc.as required - Upto 35 sq.mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc.as required - above 95 sq.mm and upto 185 sq.mm

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation , sand cushioning , protective covering and refilling the trench etc. as required - above 185 sq.mm and upto 400 sq.mm

Supply and erection of 300x50mm GI perforated type cable tray with threaded screws and required clamps and accessories

Excavation for cable trenches in soft soil , depth upto 1.2 m including dressing of sides lift upto 1.5m , including getting out the excavated soil , refilling with sand and good soil after laying of cable / pipe etc. in layers of 20cm , ramming, watering and disposal of surplus excavated soil as directed , within a lead of 50 meters

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75cm deep) and refilling etc.as required - 300mm.

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75cm deep) and refilling etc.as required -450mm.

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75cm deep) and refilling etc.as required -600mm.

Providing , laying and fixing following dia G.I.pipe (medium class) in ground complete with G.I.fittings including trenching (75 cm deep) and re-filling etc as required- 50mm dia

Providing , laying and fixing following dia G.I.pipe (medium class) in ground complete with G.I.fittings including trenching (75 cm deep) and re-filling etc as required- 100mm dia

Providing , laying and fixing following dia G.I.pipe (medium class) in ground complete with G.I.fittings including trenching (75 cm deep) and re-filling etc as required- 150mm dia

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc as required

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required

MV PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmenalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminuim busbars, bus couplers, control wiring, control fuses, seperate metering compartment with multi function meter and phase indications. Safety features and items including necessary earthing throughout the bottom length, 6 sq.mm FRLS copper wire interconnections for compartment earthing, complete copper control wiring with crimping type ferrules, copper lugs, proper engravation on each compartment etc. The switch boards shall be CPRI approved of factory assembled and tested.Current density not more than 0.8A/sq.mm for Aluminium bus bar. Neutral current rating is half the phase current All busbars shall be fixed with standard space clearance and with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus (25 x 6 mm Cu). The cable entry shall be from the bottom/top as per site requirement. The item including cost of MS base frame of 75mm height, 3.15mm sheet steel or 40x40x6mm MS angle for load bearing members, lifting hooks, steel support structure required for erection and its painting, minor civil works, vendor drawings, necessary safety clearance from statutory authorities, panel approval from PED till obtaining final power supply, all complete as per specifications, drawings and / or as directed by the Engineer.The contractor shall submit general arrangement & control wiring drawings and get approval from site Engineer/Consultant before commencing the fabrication works. (i) 800A, FP, 50KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No. as EB incomer, (ii) 400A, FP, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 2 Nos. as DG incomer. (iii) 400A, FP, 35KA, MCCB with rotary handle mechanism & spreader - 1 No. as DG Bus coupler. Phase indication lamps(R,Y,B) - 3 set. (iv) Multifunction meters cl:1.0 measured with following parameters: V,A,F,PF,KW,KWH & Phase sequence. - 3 Set : OUTGOING (v) 630A, FP, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 2 nos. (vi) 250A, FP, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No. (vii) 200A, FP, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 3 pair.(viii) 400A, TPN, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 no.

MPSB-1 PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmentalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminium bus bars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), separate metering compartment with multi-function meter and phase indications : INCOMER i) 630A, TPN, 36KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No. OUTGOING: i)315A, TPN, 36KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No. ii)160A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 3 Nos. iii) 125A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos.

MPSB-2 PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmenalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminuim busbars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 6 mm Cu), seperate metering compartment with multi function meter and phase indications : INCOMER (i) 630A, TPN, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No; OUTGOING (i) 315A, TPN, 36KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No. (Ii) 200A, TPN, 36KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 2 No. (iii) 160A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos. (iv) 125A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos. (v) 100A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos.

ACSSB-1&2 PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmenalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminuim busbars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), seperate metering compartment with multi function meter and phase indications : INCOMER (i) 315A, TPN, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No; OUTGOING (ii) 315A, TPN, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No. (iii) 100A, TPN, 16KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 8 Nos.

AHUSB PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmenalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminuim busbars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), seperate metering compartment with multi function meter and phase indications : INCOMER (i) 160A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No; OUTGOING (ii) 100A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No (iii) 63 A, TPN, 18KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 6 Nos..

Power sub PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmenalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminuim busbars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), seperate metering compartment with multi function meter and phase indications : INCOMER (i) 200A, TPN, 36KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No; OUTGOING (ii) 100A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No (iii) 63 A, TPN, 18KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 9 Nos.

Lighting Sub PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmenalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminuim busbars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), seperate metering compartment with multi function meter and phase indications : INCOMER (i) 160A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 No ; OUTGOING (ii) 63 A, TPN, 18KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 11 Nos.

LIFTSB PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmentalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminium bus bars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), separate metering compartment with multi-function meter and phase indications : INCOMER (i) 125A 4P 25KA on load Auto Transfer Switch with ON delay Timer, Auxillary relay/contactor, single phase preventer, control MCB's, ON/OFF push buttons, MFn meter, phase indications etc. - 1 No. (ii) 125A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos. OUTGOING: i) 63A, TPN, 18KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 5 Nos.

FIRE FIGHTING SB PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmentalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminium bus bars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), separate metering compartment with multi-function meter and phase indications : INCOMER (i) 160A 4P 25KA on load Auto Transfer Switch with ON delay Timer, Auxillary relay/contactor, single phase preventer, control MCB's, ON/OFF push buttons, MFn meter, phase indications etc. - 1 No.(ii) 160A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos. OUTGOING i) 125A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos. ii) 63A, TPN, 18KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 3 Nos.

PUMPSB PANEL Supply, installation, testing and commissioning of 415V cubical type, fully compartmentalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminium bus bars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), separate metering compartment with multi-function meter and phase indications : INCOMER (i) 100A, TPN, 25KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos. OUTGOING i)63A, TPN, 18KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 3 Nos. (ii)32A, TPN, 18KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 2 Nos.

ELSB - LIGHTING (wall mounted - compartmentalised DB) Supply, installation, testing and commissioning of 415V cubical type, fully compartmentalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminium bus bars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), separate metering compartment with multi-function meter and phase indications : INCOMER i) 63A, DP, 10KA, MCB 'C' Curve - 1 No. OUTGOING:i)25A, DP, 10KA, MCB 'C' Curve - 9 Nos.

UPS SB - COMPUTER (wall mounted - compartmentalised DB) Supply, installation, testing and commissioning of 415V cubical type, fully compartmentalised, floor mounted type main switch board fabricated with 16 G CRCA sheet, powder coated with Siemens grey (RAL 7032) after seven tank process and complete with bolted design and all incoming & outgoing switch gears, suitable aluminium bus bars ( Current density not more than 0.8A/sq.mm) & suitable earth bus (25 x 3 mm Cu), separate metering compartment with multi-function meter and phase indications : INCOMER i) 63A, DP, 10KA, MCB 'C' Curve - 1 No. OUTGOINGS:- i) 25A, DP, 10KA, MCB 'C' Curve - 5 Nos. ii) 32A, FP, 10KA, MCB 'C' Curve - 3 Nos.

100KVAR APFC Panel Design , fabrication, supply and erection of floor mounted medium voltage 100KVAR APFC Panel board made out of 16 SWG with powder coating paint with multi function meter and phase indications, INCOMING : 400A, TPN, 35KA, MCCB with thermal magnetic releases and rotary handle mechanism & spreader - 1 Nos. OUTGOING : Microprocessor based APFC relay with 8 stage controller, capacity duty contactors, heavy duty cylindrical gas filled type capacitors as (i) 25KVAR with 100A TPN MCCB - 1 Nos., (ii) 20KVAR with 100A TPN MCCB - 2 Nos., (iii) 10KVAR with 100A TPN MCCB - 1 Nos., (iv) 7.5 KVAR with 100A TPN MCCB - 2 Nos., (v) 5 KVAR with 100A TPN MCCB - 2 Nos.

Supply and installation of following safely equipment as per statutory norms and IE/CEA Regulation 1. Fire Bucket with stand-1 No. 2.Fire Extinguishers for electrical fires-3 Nos 3.Rubber Mats as per latest IS-12m 4. First Aid chart 5.First Aid Box 6. Danger Board

Service charges towards preparation of drawings, scheme and other relevant documents that are required by PED and liasioning with Pondicherry Electricity Department for extending necessary assistance meter panel approval

Towards obtaining CEA safety approval for HT installations and LT installation. Prior to energisation

Supply of 3 x 6sqmm armoured copper U.G cable - 1.1 KV grade. Make:Finolex/Polycab

Supply of 3 x 10sqmm armoured copper U.G cable - 1.1 KV grade. Make:Finolex/Polycab

Supply of 4 x 10sqmm armoured copper U.G cable - 1.1 KV grade. Make:Finolex/Polycab

Supply and installation of 10W outdoor wall mounted bulk head type light fixtures with all necessory accessories as required. Make: Havells/K-Lite/Halonix.

Supply and installation of 100W flood light with driver, mounting hose and all necessory accessories as required. Make: Philips/Bajaj Havells/ Halonix

Supply of 7M high hot dip galvanised octangonal pole with bottom 130mm A/F, top 70mm A/F made up of 3mm thick HT sheet steel plate along with 220x220x12mm base plate and having 1000mm long single arm bracket made up of 48mm dia. Bakellite sheet with single pole MCB & stud terminal(for mounting inside the base compartment of pole). Supply of 4 nos M20X700mm long J type foundation bolts (EN 8grade). Make: Bajaj / Transrail / Toot / Orient or Equivalent

Supply and installation of 75W outdoor street light fixtures with all necessory accessories as required. Make: Havells/K-Lite/ Halonix/ Philips

Kumar Electricals Service