Himachal

Technical BO

Works

Civil Works - Lift Irrigation Schemes

Providing Distribution System in Lift Irrigation Scheme Ramehra under HPCDP(Phase-II)-JICA-ODA at Village Ramehra,G.P Kharwar, Tehsil Bhoranj,Distt. Hamirpur (H.P)

Himachal Pradesh Agriculture Development Society (JICA-ODA loan)

Ramehra, Bhoranj | Hamirpur, Himachal Pradesh

Amount: Refer DocsCloses: 31 Jul 2026Closed

Timeline

Published23 Jul 2026
Closed31 Jul 2026
Technical Evaluation29 Aug 2026
Award—

Tender Value

Refer Docs

EMD Value

₹12,000

Closing Date

31 Jul 2026, 11:00 amClosed

Tender Inviting Organisation

Name

O/o District Project Manager,HPCDP (P-II) Hamirpur

Address

Administrative Builiding,HPCDP (P-II)-JICA-ODA

Work Description

Providing Distribution System in Lift Irrigation Scheme Ramehra under HPCDP(Phase-II)-JICA-ODA at Village Ramehra,G.P Kharwar, Tehsil Bhoranj,Distt. Hamirpur (H.P)

Tender Information

Tender ID

2026_HPCDP_139704_1

Reference Number

No. Agr. HMR. DPMU (G) (7) P-II 2026-27 Vol-I Tender File-821 Dt 22.07.2026

Tender Type

Open Tender

Product Category

Civil Works - Lift Irrigation Schemes

Form of Contract

Item Wise

Period of Work

120 days

Location

Ramehra, Bhoranj

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Refer to Bid Document

Documents Required

18 documents required · 18 mandatory

Fee/PreQual/Technical

RequiredCost of tender form as indicated in NIT 3.1.a (i) and proof may be uploaded in technical bid (.pdf)

RequiredEarnest money as indicated in NIT 3. 1.a (ii) and proof may be uploaded in technical bid (.pdf)

RequiredCertificate of registration/ enlistment as indicated in NIT Sr. No. 3.1.(a) iii (.pdf)

RequiredShould have Experience for at least 3 years during last 10 years as indicated in NIT Sr. No. 3.1.aiv (.pdf)

RequiredShould have satisfactorily completed 3 irrigation/water supply works indicated in NIT Sr.No.3.1a.v (.pdf)

RequiredShould have satisfactorily completed at least 1 work as indicated in NIT Sr. No. 3.1(a) vi (.pdf)

RequiredShould have Financial Statement for at least 3 years during last 10 years indicated in NIT 3.1.a vii (.pdf)

RequiredAvg annual turnover for at least 3 years during last 10 years as indicated in NIT Sr. No.3.1.a.viii (.pdf)

RequiredSolvency as indicated in NIT Sr. No. 3.1.(a) ix (.pdf)

RequiredTechnical Proposal as per as indicated in NIT Sr. No. 3.1.(a) x (.pdf)

RequiredBidder Qualification as indicated in NIT 3.1.a.xi (.pdf)

RequiredEmpanelled firms of manufacturers for HDPE Pipes as indicated in NIT3.1.a.xii (.pdf)

RequiredValid PAN Card as indicated in NIT Sr. No. 3.1.a.xiii (.pdf)

RequiredShould be registered under GST Rules as indicated in NIT Sr. No. 3.1.a.xiv (.pdf)

RequiredSite inspection Certificate duly certified by BPM for subproject as indicated in NIT Sr.No.3.1.a.xv (.pdf)

RequiredAffidavit for not panelized terminated under HPCDP JICA Phase-I.II indicated in NIT Sr. No.3.1.a.xvi (.pdf)

Finance

RequiredLetter of Bid (.pdf)

RequiredBoQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,500

EMD Fee Amount

₹12,000

Pre-Bid Meeting

Meeting Place

Administrative Builiding,HPCDP (P-II)-JICA-ODA

Important Dates

Last Activity

31 Jul 2026

Published

23 Jul 2026

Bid Opening

31 Jul 2026

Download Starts

23 Jul 2026

Download Ends

31 Jul 2026

Submission Starts

23 Jul 2026

Pre-Bid Meeting

26 Jul 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (11 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, pits upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, chieselling soft / hard rock including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil in ordinary rock as well as for all kinds of soil directed, within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, pits upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, chieselling soft / hard rock including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil in ordinary rock as well as for all kinds of soil directed, within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
3Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
4Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, for 63mm & 75mm including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
5	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, for 90mm & 110 mm including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.	795	Rmt	-	-
6Prepration & Consolidation of subgrade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 depth,dressing to chamber and consolidating with road roller including making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth material complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
7Supply and stacking at site (of 63 mm to 45 mm stone aggregates) complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
8Laying & Spreading and compacting complete stone aggregates of specified sizes to water bound macadam specifications in uniform thickness,handpicking,rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber,applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate,watering and compacting to required intensity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
9Scarifying metalled (Water Bound) road surface including disposal of rubbish,consolidation of the aggregate received from scarifying with power road roller of 8 to 10 Tonne capacity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
10Surface dressing on new surface with paving bitumen of grade VG-10 of approved quality using 2.25Kg of bitumen per sqm with 1.65 cum of stone chipping 13.2 mm nominal size per 100 sqm of road surface,including consolidation with road roller of 6 to 8 Tonnes capacity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.01 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.22 MB

Work Item Documents

BidDocumentRamehra.pdf

Tender Documents • 1.21 MB

BOQ_207123.xls

BOQ • 0.30 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, pits upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, chieselling soft / hard rock including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil in ordinary rock as well as for all kinds of soil directed, within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, pits upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, chieselling soft / hard rock including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil in ordinary rock as well as for all kinds of soil directed, within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
3Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
4Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, for 63mm & 75mm including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.
5	Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, for 90mm & 110 mm including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.	795	Rmt	-	-
6Prepration & Consolidation of subgrade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 depth,dressing to chamber and consolidating with road roller including making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth material complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
7Supply and stacking at site (of 63 mm to 45 mm stone aggregates) complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
8Laying & Spreading and compacting complete stone aggregates of specified sizes to water bound macadam specifications in uniform thickness,handpicking,rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber,applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate,watering and compacting to required intensity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
9Scarifying metalled (Water Bound) road surface including disposal of rubbish,consolidation of the aggregate received from scarifying with power road roller of 8 to 10 Tonne capacity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.
10Surface dressing on new surface with paving bitumen of grade VG-10 of approved quality using 2.25Kg of bitumen per sqm with 1.65 cum of stone chipping 13.2 mm nominal size per 100 sqm of road surface,including consolidation with road roller of 6 to 8 Tonnes capacity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, pits upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, chieselling soft / hard rock including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil in ordinary rock as well as for all kinds of soil directed, within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

2Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains, pits upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing and pumping out water, chieselling soft / hard rock including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil in ordinary rock as well as for all kinds of soil directed, within all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

3Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

4Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, for 63mm & 75mm including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, for 90mm & 110 mm including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and then disposing of surplus excavated soil as directed, within all lead and lifts including restoration of unmettalled surfaces to its original condition complete in all respect and to the entire satisfaction of the Engineer-in-Charge.

795

Rmt

6Prepration & Consolidation of subgrade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 depth,dressing to chamber and consolidating with road roller including making good the undulations etc. and re-rolling the subgrade and disposal of surplus earth material complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

7Supply and stacking at site (of 63 mm to 45 mm stone aggregates) complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

8Laying & Spreading and compacting complete stone aggregates of specified sizes to water bound macadam specifications in uniform thickness,handpicking,rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber,applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate,watering and compacting to required intensity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

9Scarifying metalled (Water Bound) road surface including disposal of rubbish,consolidation of the aggregate received from scarifying with power road roller of 8 to 10 Tonne capacity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.

10Surface dressing on new surface with paving bitumen of grade VG-10 of approved quality using 2.25Kg of bitumen per sqm with 1.65 cum of stone chipping 13.2 mm nominal size per 100 sqm of road surface,including consolidation with road roller of 6 to 8 Tonnes capacity complete in all respect within all leads and lifts and to the entire satisfaction of the Engineer-in-Charge.