Repair of Railing and Staircase Situted Chharra Adda Pul on Delhi Aligarh Kanpur (Old N.H.-91) Aligarh Shahari Abadi Portion in Km-135

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. .AS Per DSR 15.3 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. As per D.S.R. No. 10.25.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture AS Per DSR Ch-13, S.I 13.62.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).AS Per DSR Ch.-5, SI No.5.3 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more..AS Per DSR Ch-5, S.I 5.22C.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-harge. .AS Per DSR Ch-10, S.I 10.31 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Centering and shuttering including strutting, propping etc. and removal of form for Stairs, (excluding landings) except spiral-staircases AS Per DSR Ch-5.9.7 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.)

Please Enable Macros to View BoQ information