Tamil Nadu Urban Roads Infrastructure Project 2024-25 (Available Savings Fund 2023-24

Amount

Dismantling Plain cement concrete surface and removing from site incuding all labour charges etc complete .

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications. removing to 2km local lead

Plain Cement Concrete 1:4:8 mix (One part of Cement, Four part of Fine Aggregate and Eight part Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNDSS No.28).

Providing formwork for all Rcc works of sides and soffits for plain surfaces of slabs, beams and columns with support and strutting up to 3.60m hight with all cross bracings using mild steel sheetof 90cm*60cm and stiffened with welded mild steel angle of size 25*25*3mm for boarding laid over silver oak joists of size 10cm to 6.50cmspaced at 90cm c\c and supported by casurina props of 10cm to 13cm dia spaced at 75cm c/c complying with standards specification.

Plain Cement Concrete 1:2:4 Mix (one part cement, three part M.sand and six part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 150mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Supplying and laying interlock paver of approved make as per at land surface using M40 grade concrete blocks its minimum thickness of 83 mm and providing minimum 100 mm thick stone Dust cushion below the pavers as sub base stone Dust filling between the Pavers and compaction by hydrualic compresive machine same as for Powers and capacity the same as directed by the departmental officers etc,complete as per standard specifications

Supply and fabrication of Steel including cost and conveyance and all labour charges including all charges etc., completed.

Re-inforced cement concrete 1:1½:3 (one cement one and half sand and three hard broken stone) using 20mm gugage machine broken hard granite stone jelly for all RCC items for works excluding the cost of re-inforcement and fabricating charges, centering and shuttering. But including the curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, same etc., shall be finished smooth with cement mortar 1:3 (one cement and three sand) 1MM thick and with kraft paper without claiming extra paper without claiming extre etc., as directed by the departmental officers complete complying with standard specifications. The rate is including with vibration.

Plain Cement Concrete 1:1½:3 (one cement one and half sand and three hard broken stone) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.