ADDITION/ALTERATION TO EXISTING RETAINING WALL AT DIGLIPUR, PROVN OF WEAPON LOCKER (7 NOS) WITH GROUTING AND PROVN OF SHED WITH RACKS AT LAXMIPUR UNDER GE (SOUTH) DIGLIPUR

Amount

Demolition of reinforced cement concrete of any description and in any position in ground floors and pavings exc 15cm thickness (below or above ground level) including removing of rubbish to out side MOD land complete all as specified and as directed

Excavating in trenches any type of soil n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and directed

M&L for plain cement concrete (1:4:8) type D2 (40mm graded aggregates) as in foundation,filling and mass concrete complete all as specified and directed.

Use and waste for formwork of Square, rectangular or polygonal to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface complete all as specified and as directed

Use and waste for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc vertical or to batter for fair finished surface complete all as specified and as directed.

M & L for re-inforced cement concrete of grade M-30 (Design mix) (using 20mm graded stone aggregate) in foundations including rafts, footings and mass concrete complete all as specified and as directed.

M & L for re-inforced cement concrete of grade M-30 (Design mix) (using 20mm graded stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed

S&F mild steel TMT bars 10 mm dia and over ,cut to length , bent to shape requred, including cranking , bending spirally for columns hooking for columns hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M & L 110 mm dia bore low density polyethylene pipes (LDPE) of pressure rating 6Kg/Sqcm fixed as weep holes in retaining walls complete all as specified and as directed.

Boulder size 80 to 150 mm filling as in weep holes complete all as specified and as directed

M&L for plain cement concrete (1:3:6) type D2 (using 40mm graded granite stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for pre cast cement concrete solid block masonry exc 10 cm in width using PCC 1:3:6 type C-1(using 20mm graded aggregate) set in CM (1:6) complete all as specified and as directed

M&L for chequered cement concrete tiles with grey cement and pigment of size 30cm x 30cm x 25mm, set jointed and pointed in neat cement slurry over 15mm thick screed in CM (1:6) complete all as specified and as directed

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick back in trenches all as specified and directed at site.

Removing surplus soil obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting paint complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar (1:6), including finishing even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces of wall and finished fair and even complete all as specified and as directed.

M&L For for preparation of newly plastered surface of wall and applying three coat of white wash complete all as specified and as directed.

Preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of white wash complete all as specified and as directed

M&L for hard core of gauge nexc 63 mm deposited , spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as Sub base of hard standing/pathway complete all as specified and as directed.

M& L For PCC flooring type B1 (1:2:4) using 20 mm graded stone agg 100 mm thick over sub base including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M & L for Providing precast cement concrete in window or door cills, lintels complete all as specified and as directed

S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed

M&L for Mild steel plates (Plain or chequrred , channels, square cut or notched ordinary and with reivited bolted or welded attachment Fe-410-W (Gde E-250 quality) complete all as specified and as directed

S& F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of TATA Blue seopy/ciril coloured having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws, as per manufacturer instruction complete all as specified and as directed

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to waal, fixed with self tapping screws, as per manufacturer instruction and all as specied and directed.

Pressed steel frames for doors with one or more rebates including necessary fixing 125 x 60 mm lugs, hinges, lock strike plate, etc complete all as specified and as directed

S & F for 30 mm thick 2nd class HW panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkall including 2 coat of synthetic enamel over one coat of pink primer complete all as specified and as directed

S&F for 30 mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats including 2 coat of synthetic enamel over one coat of pink primer complete all as specified and as directed

S & F steel windows with side hung shutter with projecting type hinges, steel handles and steel peg stays, complete with glazing bars, dovetailed or welded and making good the jambs/ceills etc including preparation of steel surface & providing two coats of synthetic enamel paint alround over and including one coat of red oxide primer alround surface complete all as specified and directed.

Ditto item 31 above but window without glazing bars Ditto

S&F mild steel butt hinges steel hinges med wt 100 mm complete all as specified and as directed

S & F aluminium alloy anodised handle, febricated type 150mm long complete all as specified and as directed

S & F aluminium anodised, 150mm long barrel tower bolts of extruded section complete all as specified and as directed

S & F aluminium anodised floor door stopper 100mm long complete all as specified and as directed

S & F 300 mm aluminium alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sjeet, cast or extruded sections or cast aluminium alloy complete all as specified and as directed

Supplying and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm (weight not less than 600 gms/per sqm) and fixed with aluminium wire staples, wooden beads etc complete all as specified and directed

S & F 3mm thick sheet glass ordinary quality, ground or obscured or frosted, on one side and glazing with oil putty in square n.exc 0.5 Sqm in each pane etc complete all as specified and as directed

M&L for PCC (1:3:6) type C2, (using 40mm graded stone aggregate) as in plinth protection, 75 mm thick, finishing the surface even and smooth w/o using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed.

Supply and fix Powder coated weapon locker made of 20 gauge GI sheet of size 60cm x 60cm x 165cm with internal vertical partition of size 90 cm (ist partition =01 Nos) and 25 cm (2nd middle & 3rd bottom partition=2 Nos) with 02 Nos of shutter having 01 No vertival Mortice lock 100mm (6 lever) make harrison/ Godrej with GI foot of size 10cm x 60cm x 10cm including necessary excavation and embedding/ routing in ground with PCC 1:2:4 type B2 (using 20mm graded stone aggregate) complete all as specified and as directed

M&L for Framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290, Gde-E-165 including preparation of steel surface & providing two coats of synthetic enamel paint alround over and including one coat of red oxide primer alround surface complete all as specified and directed.

S&F MS Butt hinges size of 100 mm, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

GOUTAM BISWAS (BID ID -3301792)