Rehabilitation of Approach Road and Improvement of Basic Facilities at Janauri Dam , District Hoshiarpur, Punjab under Dam Rehabilitation and Improvement Project DRIP

Scarifying the existing bitumenous road surface to a depth of 50mm & disposal of scarified material within all lifts and leads upto 1000 m

Providing and laying of Brick on end edging 6.83 cm wide, 11.11cm long and 22.86 cm high half brick deep including excavation , refilling and disposal of surplus earth upto 50m complete as per PWD specifications

Water Bound Macadam Grading II Providing , laying ,spreading and compacting stone aggregates of gradingII to water bound macadam specification including spreading in uniform thickness, hand packing , rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate , watering and compacting to the required density complete as per technical clause 404 of MORT&H Specifications,

Surface Dressing Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bitumenous binder VG-10@1 Kg/sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications

Tack Coat @0.40 Kg per sqm Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications

Open - Graded Premix Surfacing 20mm thickness Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications

Seal Coat Type B Providing and laying of Premix sand seal coat premixed in continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil . In Ordinary Soil ( A. Manual Means) Depth upto 3 m

Depth 3 m to 6 m

Depth above 6 m