OUTSOURCING OF SERVICES FOR E/M INSTALLATIONS AT GOPAL COLONY, PARTAP COLONY AND BABURAO COLONY AND MISC MAINTENANCE WATER SUPPLY WORKS UNDER AGE B/R RND SECUNDERABAD.

Amount

Provision of services for maintenance of entire external and internal electric supply system,including substations, rectification of faults, repairs and replacement of electrical fittings, fixtures like, light, fan, sockets , geysers, street lights etc and equipments, LT cables and HT fuses, distribution panels, attending of complaints, replacement of parts and fittings of street lights and maintenance/cleaning of LT panels, AMF panels and earth pits, cleaning of complaint cells and removing vegetation upto grass root level of substation surrounding areas complete all as directed including Sundays & Holidays for area as mentioned below:- (a) Maintaining entire external and internal electric supply system located at BabuRao and Gopal colony Secunderabad in three shifts (1st shift from 0600h to 1400h, 2nd shift 1400h to 2200h & 3rd shift 2200h to 0600h) (b) Maintaining entire external and internal electric supply system located at Pratap colony Secunderabad in three shifts (1st shift from 0600h to 1400h, 2nd shift 1400h to 2200h & 3rd shift 2200h to 0600h) Man power to be employed : 01 Electrician (semi skilled) and 01 Helper (unskilled) per shift per each bunch as mentioned in sub para (a) and (b) here-in-before. NOTES: (i) In case of requirement, tradesmen provided for one area may be utilised in other areas at the discretion of the department for which contractor shall not have any claim what-so-ever on this account.

(ii) Materials required for the maintenance shall be supplied by the department free for fixing only. The labour element for the same shall deemed to be included in the quoted rate. (iii) Tools and plants, cotton waste required for maintenance shall be supplied by the contractor and cost of same shall deemed to be included in the quoted rate. (iv) The contractor shall supply uniform to their employees for wearing during working hours of shift. The uniform shall be pant and shirt and shall be in blue colour. The pattern of uniform shall be as decided by GE. The quoted rate shall deemed to include this provision. (v) Contractor shall supply the following items to their tradesmen and quoted rate shall deemed to include this provision (a) Megger Earth tester (b) Multimeter (c) Rubber shoes (d) Rubber hand gloves (e) Torch light (vi) In case of absence of tradesmen during any shift, continuously for a period not exceeding 15 minutes, double the quoted rate shall be recovered from the due payments of the contractor. (vii) Departmental equipments of each installation shall be under safe custody of the contractor. In case of theft/misuse of the equipment, the cost of same shall be recovered from the due payments of contractor.

(viii) Group insurance of all staff employed shall be made by the contractor. Documents shall be submitted to the department. (ix) Qualification / Experience certificate (minimum 05 years) with age not more than 60 Years of all staff employed shall be submitted. (x) The contractor shall submit the ID Proof, Bank Account No. of Operator/ Person Employed, payment shall be made through Cheque/NEFT/RTGS.

Note: 1. Contractor shall quote cumulative of basic rate,VDA , employers contribution towards EPF liability, contribution towards ESIC, contribution towards bonus, over head and profit as applicable as per instruction in vogue including all Taxes, Cess, Levies as applicable including GST. 2. Monthly wages shall be paid by the contractor to the workers/labour only online. Proof of statutory deductions in favour of workers/labour shall be submitted by the contractor to the GE. The contractor will be required to submit copy of valid labour licence from the labour Commissioner within 15 days of commencement of the work. If the contractor fails to submit the same within this stipulated period the contact shall be liable to be cancelled and the performance Secuirty of the firm shall be forfeited accordingly. Reference is also invited to this HQ letter No.A/37696/Gen/Pol/E2W(PPC) dated 27 July 2017 as amended vide letter of even No. dated 09 May 2018.

M&L for Refilling of Dry chemical type fire extinguisher capacity 5 Kg complete all as directed.

M&L for Refilling of Mechanical foam type fire extinguisher capacity 9 Ltrs complete all as directed.

M&L for Dismantling of Electric incinerator including canopy with insulation and sound proofing (general waste incineration system for non hazardous waste like garbage/paper/general and garden waste electrically operated capacity approx 10 Kg per operation with chimney)including cleaning the entire system with blower, replacement of the unserviceable spares i.e fire/insulation bricks, sensors, heater elements, safety control, connectors etc., and re-assembling the Electric incinerator set after repair including scrubbing old paint and painting with two coats of machine paint over a coat of red oxide primer complete all as directed. Make : Precitech India( As per existing) Note: The replacement items will be measured and paid seperately.

Supply only the following items:-

Insulation bricks

Primary Sensor

Secondary Sensor

Electronic heater element

Rotary Switch

Connector for electronic heater element

Blanket of ceramic wool Make for item srl No 7.01 to 7.07 - Precitech India ( As per existing) or make as approved by GE

S&F following items suitable for existing solar fencing system including necessary tree cutting / trimming fixing accessories and taking down unserviceable items complete all as directed.

Energizer

Fence voltage alarm

12G HT wire

Sealed maintenance free battery 12V, 65 AH

Charge controller

CP Strain Insulator

Anti clambing insulator

Permanent wire tighteners

S Hooks

Joint clamps

Double insulation cable

Warning sign board

Corner pole/Intermediate pole (approx 1.5 mtr height) including necessary civil works complete Make for item srl No 08.01 to 08.13 : Crown solar power fencing ( As per existing) or equivalent make as approved by GE

S&F following items suitable for existing single lane automatic flap barrier in-built microprossesor based controller including fixing accessories and taking down unserviceable items complete all as directed.

DC servo motor 12V/30W

Photo beam sensor

SMPS (Switched mode power supply)

Limit switch

Gear box assembly

Mother board

Supply and fixing the following spares suitable for existing sauna heating system and steam bath including taking down unserviceable spares complete all as directed. Make : Linco/Jaquar or equivalent make as approved by GE

Power circuit board

Heating element 2 KW

Steam heater 6 KW

Timer Unit

Thermostat

Contactor

Digital Sauna heater control panel

Solnaid valve

Flexible pipe (Steam)

Teflon wire for sauna box

Sauna spring

Water pipe (PVC)

Servicing to existing sauna heating system complete all as directed.

Servicing to existing steam bath complete all as directed .

Servicing to existing Jacuzzi complete all as directed.

Cleaning thoroughly the steel street light poles of any height and any description (Maximum 9 Mtr long) scrapping on old paint, dirt/rust carefully and applying one coat of aluminium paint marking of zebra crossings up to a height of 1.0 meter above the coping with black and yellow strips of synthetic enamel paint including writing pole numbers and colour washing to pole coping complete all as directed. Make : Asian/Shalimar

S&F following items suitable for existing full height single lane turnstile of size 1500x1500x2000mm & tripod turnstile of 500mm walkway including fixing accessories and taking down unserviceable items complete all as directed.

Adaptor 24V DC input

IC (Integrated Ciruit)

Push button element with enclosure

Control Panel

Sensor

S&F security light fitting bracket made out of GI tubing 40mm dia light grade of size 1.5m long, bent to shape including clamp for bracket made out of 50x6mm MS flat iron with necessary nut & bolts, washers complete and taking down unserviceable bracket complete all as directed. Make : ZENITH/ TATA/ JINDAL/SWASTIC

S&F Pole junction box, made up of sheet moulding compound (SMC) type with hinged type door and locking arrangement, white colour of size 280x170x130mm outside and 240x130x110mm internal dimensions comprising 01 No-16 Amps capacity kitkat fuse, aluminium busbar-04 Nos, earthing terminals, bolts & nuts and connecting up cables with aluminium terminal lugs including suitable size clamps,bolts, nuts and washers fixed on pole complete and taking down unserviceable junction box complete all as directed Make - Sintex or equivalent ISI marked

M&L for GI water tubing of 65mm bore 'Medium Grade' with all fittings such as elbow, socket, tee, union and nipples etc, including cutting, threading etc, laid in trenches or fixed to walls complete including taking down unserviceable water tubing complete all as directed.

All as per srl item No.18 here-in-before but of 50 mm bore complete.

All as per srl item No.18 here-in-before but of 40 mm bore complete.

All as per srl item No.18 here-in-before but of 32 mm bore complete.

All as per srl item No.18 here-in-before but of 25 mm bore complete.

All as per srl item No.18 here-in-before but of 20 mm bore complete.

All as per srl item No.18 here-in-before but of 15 mm bore complete. Make for srl item No 18 to 23 : ZENITH/ TATA/ JINDAL/SWASTIC

Supply and fixing in repairs GI small fittiings such has socket, elbow, nipple of any length, tee, reducer, dummy plug etc including cutting, threading for galvanised iron 15mm bore pipe complete all as specified as directed. Note : Taking down and refixing of old GI tubing upto 1.5mm including in rates.

All as per srl item No.25 here-in-before but of 20 mm bore complete.

All as per srl item No. 25 here-in-before but of 25 mm bore complete.

All as per srl item No. 25 here-in-before but of 32 mm bore complete.

All as per srl item No. 25 here-in-before but of 40 mm bore complete.

All as per srl item No. 25 here-in-before but of 50 mm bore complete.

Supply and fixing in repairs GI small fittiings such as union etc including cutting, threading for 15mm bore pipe complete all as specified as directed.

Supply and fixing in repairs GI small fittiings such as union etc including cutting, threading for 20mm bore pipe complete all as specified as directed.

Supply and fixing in repairs GI small fittiings such as union etc including cutting, threading for 25mm bore pipe complete all as specified as directed.

Supply and fixing in repairs GI small fittiings such as union etc including cutting, threading for 40mm bore pipe complete all as specified as directed.

Supply and fixing in repairs GI small fittiings such as union etc including cutting, threading for 50mm bore pipe complete all as specified as directed.

Cutting of GI pipe of 32 to 65 mm bore dia from site to work shop and threading as per requirement of GI pipe and reassembling the same in position complete all as specified as directed.

S&F for Brass, globe or gate valves of size 65 mm bore with all fittings, iron wheel head,screwed both ends for iron pipe and fixed including taking down unserviceable gate valve complete all as directed.

All as per srl item No.24 here-in-before but of 50 mm bore complete.

All as per srl item No.24 here-in-before but of 40 mm bore complete.

All as per srl item No.24 here-in-before but of 32 mm bore complete.

All as per srl item No.24 here-in-before but of 25 mm bore complete.

All as per srl item No.24 here-in-before but of 20 mm bore complete.

All as per srl item No.24 here-in-before but of 15 mm bore complete. Make for item Nos.24 to 29: ZOLOTO/ LEADER/MITTAL/ NETA

S&F Brass foot valve of 65mm dia with all fittings, screwed both ends for iron pipe and fixed including taking down unserviceable Foot valve complete all as directed.

All as per srl item No.30 here-in-before but of 50 mm dia complete.

S&F Brass Non return valve of 50mm dia with all fittings screwed both ends for iron pipe and fixed complete including taking down unserviceable Non return valve complete. Make for srl item No. 30 to 32: KIRLOSKAR/ UPADYAYA/DURGA/ KARTAR/ BIR

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of pipe line and getting out in hard/dense soil complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick using soil complete all as directed.

Removing excavated material to a distance not exc.50m deposting where directed at a level n exc.1.5m above the starting point complete all as directed.

Material and Labour for cutting existing BT road/PCC of size n Exc 30cm x 75cm for taking out/laying of pipe line and including necessary earth work and refilling the same in layers well ramming including watering as required and matching with the existing surface with 200mm thick PCC 1:2:4 type B1 and curing the same with wet gunny bags and removing debris to a distance not less than 50m complete all as specified and directed

M&L for dismantling old valve chamber and material and labour for construction of brick masonry new valve pit chamber of size 900mmx900mmx900mm (internal), 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate, providing with old size fly ash bricks masonry wall of 230mm thick built in CM 1:6, rendering 15mm thick in CM 1:6 finished even and smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even externally and plaster shall be done 150 mm below ground level, supply and fix 2mm thick MS sheet steel cover fixed on 40x40x6mm angle iron frame embedded in PCC 1:2:4 coping with locking arrangement and MS hold fast and handle made out of 25x6mm flat iron, applying two coats of synthetic enamel paint of approved shade over a coat of primer (red oxide) to all exposed steel surfaces and applying three coats of white wash to exposed plastered surfaces and making good all disturbed suface to match surrounding complete all as directed.

S&F following items suitable for existing solar power light system including fixing accessories and taking down unserviceable items complete all as directed.

CFL 11 Watt, 4 Pin with holder Make : Philips/Bajaj/Wipro

Sealed maintenance free battery 12V,65AH Make : Exide/Amaron

Servicing of photo voltic cell (panel)

Dismantling of old unserviceable Panel and Supply & fabrication of LT Panel Board EACH CPRI approved cubical type made of 2 mm thick sheet steel indoor type with IP 67 grade of protection CRCA sheet powder coated with support of angle iron of 50 x 50 x 6 mm angle iron bottom legs with minimum height of 20 cm frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front and back openable inspection doors PVC sleeved Aluminium bus bar of 500 Amps capacity for each phases and half neutral fixed on suitable insulator all housed in suitable bus bar chamber and cable alloy including provision and fixing of digital Voltmeter -01 No, Ammeter-01 No. CTs of suitable ratio, and Indicating LED type lamp for Red,Yellow and Blue in comer phases complete along with provision of necessary cable entry/exit boxes for all incoming and out going cables with suitable cable glands etc fixed on suitable PCC foundations of suitable size,testing and commissioning complete and consisting the following :- (Drawing of Panel and connections shall be approved by Engr-in-Charge before starting the panel work. (a) MCCB 4 Pole 250 Amps 25KA -01 No. (as Incoming) (b) MCCB 4 Pole 100 Amps 16KA -06 No. (as Outgoing) Make- ABB (T-Max)/ SIEMENS(3VT)/ LEGRAND (DPX)/ L&T (D-Sin)/ SCHNEIDER (NSX) , C & S Panel CPRI (Approved)

M&L for sub main wiring with two runs of single core PVC insulated unsheathed cable 10 sqmm (nominal area) 1100 volts grade multistranded HRFR copper conductor with one run of 10 sqmm PVC insulated unsheathed multistranded single core copper conductor 1100 V grade and connecting to common earth drawn through and including PVC concealed conduit medium grade ISI mark not less than 32 mm outer dia complete and accessories of suitbale size as required including taking down old sub main wiring complete all as directed. Note : Three runs of 10 sqmm cable and one run of conduit shall be measured and paid as one length. Make: KEI/ RPG/ INDOASIAN/ FINOLEX/ GLOSTER/ HAVELLS

M&L for distribution board made of sheet metal TPN 4 way with 200 Amps rated bus bar with metal door including taking down unserviceable distribution board complete all as directed.

M&L for distribution board made of sheet metal TPN 8 way with 200 Amps rated bus bar with metal double door including taking down unserviceable distribution board complete all as directed.

M&L for distribution board made of sheet metal SPN 2 way with 200 Amps rated bus bar with metal singal door including taking down unserviceable distribution board complete all as directed.

M&L for distribution board made of sheet metal SPN 8 way with 200 Amps rated bus bar with metal double door including taking down unserviceable distribution board complete all as directed.

M&L for distribution board made of sheet metal SPN 4 way with 200 Amps rated bus bar with metal double door including taking down unserviceable distribution board complete all as directed.

M&L for MCB TPN 63 Amps 415 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed.

M&L for MCB SPN 40 Amps 240 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed

M&L for MCB SP 06 to 32 Amps 240 volt,C' curve,10KA including taking down unserviceable MCB complete all as directed.

Servicing and load testing of 1 ton single girder EOT Crane including scrubbing old paint and painting with two coats of spray paint over a coat of red oxide primer complete all as directed. Note: The following items for crane testing shall be arranged by the contractor and the cost shall be deemed to be included in the quoted rate. (i)Test Loads (ii) Deflection gauge (iii) Wire rope slings (iv) Tools & tackles (v) Transportation etc., required for testing

M.R.ENTERPRISES

vvcenterprises