DEMOLITION OF BUILDING T-60 AND CONSTRUCTION OF SHIFTING ROOM FOR INDUSTRIAL STORE STAFF AT NAD AND REPAIR/REPLACEMENT OF SEWAGE DRAINAGE LINES AT VARIOUS PLACES IN RESIDENTIAL COLONY AT NAD TROMBAY UNDER GE (NW) MANKHURD

Amount

M & L Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out In Hard/dense soil.completed all as specified

Surface excavation n.exc. 30 cm deep and averaging 15 deep and in soft loose soil.complete all as specified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for sewage line and getting out in hard/ dense soil all as specified and directed.

Excavating in trenches, by mechanical means(hydraulic excavator) n exc 1.5 m wide and n exc 1.5 m in depth; for Plinth Beam & Dwarf Wall, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth for Dwarf Wall and getting out in Hard/dense soil.

Excavating in trenches for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 Sqm on plan and not exc 1.5 m in depth and getting out in soft / loose soil complete all as specified and as directed.

M & L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

M & L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M & L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M & L Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

M & L Cement concrete in foundations, filling and mass concrete 1:4:8 using 40 mm graded aggregate

M & L for cement concrete 1:4:8 type D2 using 40 mm graded trap stone aggregate as in foundations and mass concrete etc all as specified and directed.

M & L cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in channels in manholes and drain etc.

M & L cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate as in coping including necessary form work.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Hard/dense soil.

Removing excavated material in Hard/dense Soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M & L RCC- M-30 (Design Mix) using 20mm graded aggregate For Footing and plinth beams

M & L RCC- M30 (Design Mix) using 20mm graded aggregate for Column complete all as specified and directed

M & L RCC- M30 (Design Mix) using 20mm graded aggregate for beams and lintels complete all as specified and directed

M & L RCC- M30 (Design Mix) using 20mm graded aggregate for RCC Slab

S & F TMT bars 10mm dia & over of Grade Fe 500 incl cutting, bending, binding & placing in position with binding wirefor footings Slab beams roof slab etc complete al as specified and directed

Ditto but 5 to 10mm dia in stirrups, spacers & binders.

Supply and fix Mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape as in reinforcements and biding with and including mild steel wire not less than 0.9mm (annealed) complete all as specified and directed .

M & L Form work for rough finished surfaces of concrete measured flat for For Footing

M & L Form work for rough finished surfaces of concrete measured flat for Column,

M & L use & waste Form work for rough finished surfaces of concrete measured flat for Plinth Beam

M & L use & waste Form work for rough finished surfaces of concrete measured flat for RCC beams sides and soffits

M & L use & waste Form work for rough finished surfaces of concrete measured flat for RCC Slab

M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:6) mortar, complete.

M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:4) mortar, complete.

M & L for cement concrete 1:3:6 type C-1, using 20mm grade stone aggregate as in coping of stone masonry wall, bed blocks and the like including weathering slightly rounded or chamfered and throating as directed including necessary formwork complete all as specified and directed.

S& F second class hard wood , plain ,soild ,straight chowkats and frames, wrought , rebated on soild rounded or chamfered , put together with gule pinned at joints etc complete all as specified .and directed

S&F 35 mm thick plain , framed ,panelled shutters ( any number of panels),in 2nd class hardwood,with panels of timber flat on both sides (feather edged) ,or of veenered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified.

S & F 35 mm thick glazed and skeleton shutters, in 2nd class hardwood, open rebated and prepared to receive glass, gauze etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a)

M& L for preparation of newly or previously untreated surfaces of wood or wood based surfaces of any description not other wise described , over10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed.

S&F extruded aluminum alloy handles (150mm ) fabricated type anodised complete all as specified Make :- Shalimar / jyoti/ Classic/ Ashoka

S&F hinges (150 mm) stainless steel medium weight complete all as specified

S&F aluminum anodised barrel tower bolts (150 mm ) of extruded section complete all as specified

S&F 300 mm Aluminium alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet , cast , exctruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified

S & F For powder coated aluminium sections frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Material & Labour for applying Two Coats Of Oil Bound Distemper Over One Coat Of Primer on Internal Wall

Material & Labour for applying Three Coat of White Wash on ceiling including 3mm thick white putty

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesM @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for Two coats of synthetic enamle paint over a coat of red oxide primer over prepared surface steel

M & L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L 75mm Thick Cement concrete ( 1:4:8 ) type D-2 (40mm graded aggregate)

Screed bed or bedding layer of mortar CM(1:6) 15 mm thick for laying floor finishes

M & L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L for Coloured Glazed ceramic tiles in vertical surface 350 x 250 mm x 7 mm / 450 x350x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match

M & L for Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

All as per items No 49 above but as in skirting complete all as specified and directed

M & L 10mm Backing Coat In CM (1:4)

M & L 75mm thick Plinth Protection PCC (1:3:6) using 20mm graded aggregate (0.75 m wide).

M & l for 3mm APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torched application complete and finally finished as per manufacturers instructions

Screed bed or bedding layer of mortar CM(1:3) 10 mm thick

SUPPLY ONLY Water Proofing compound

S&F for Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per spcification & drawing etc, complete all as specified and as directed.

S&F for Factory made solid PVC Moulded door shutter , 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm th. Moulded PVC sheet on the front face & 2mm plain coour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS etc, complete all as specified and as directed.

S&F aluminum anodised grill DG- 202 ( 10 mm x 5.2mm ) of Deco grill or equivalent fixed with 'F' section size not less than 20.60 x 15.20 x 1.5mm thick of approved make all as specified and directed. Note : (i) Make shall be of M/s Decogrille of M/s Associated Groups or equivalent as approved by the GE. (ii) Minimum thickness of anodizing shall be 15 microns.

Supply only 4mm thick sheet figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 Sqm in each pane etc complete all as specified and directed

Supply only stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperture 1.40 mm , fixed in aluminium windows complete all as specified and directed.

S&F in Godrej night latch 4 lever for entrance door with fittings complete all as specified and directed

Supply and fix aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolt of extruded section of size 250 mm fixed at any position all as specified and directed.

S&F brass chromium plated towel rail 20mm dia 'D' type 600mm long between flanges, Cat No BA -01 of with and including chromium plated brass screws etc complete all as specified and directed. Make:Prayag polymers Pvt Ltd or equivalent

S&F 20mm dia fancy type chromium plated curtain rod brackets complete all as specified and directed

S&F CI floor trap 75mm dia outlet, with CP grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) & taking down old trap complete all as specified and as directed.

S&F CI floor trap 100mm dia outlet, with CP grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) & including taking down old trap complete all as specified and as directed.

S&F wash down water closet (pedestal pattern) white and including plastic water closet seat cover as per reqd colour with flat bottom and cover and mild steel chromium plated or aluminium hinging device (excluding flushing cistern ) etc complete all as specified and directed..

S&F wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets,32mm waste fitting and waste pipe of 32 mm bore, brass, chromium plated for glazed ware wash basin and 15mm dia pillar taps chromium plated fancy type etc complete all as specified and directed.

Supply and fix 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed.

S&F for CP concealed stop cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F CP bib tap 15mm bore fancy type with crutch or butterfly handle, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S&F CP pillar taps 15mm bore., cast copper alloy, chromium plated fancy type complete all as specified and directed.

M&L in repair waste fitting of 32 mm bore brass, chromium plated for glazed ware wash basin etc complete all as specified and directed..

S & F waste pipe for WHB/ sink 32mm bore fixed to wash hand basin/sinks coupling length pipe 0.90 mtrs each Make -prayag complete all as specified and directed..

S/Fin repair 15mm size PVC connection with PTMT nuts 450mm length.complete all as specified and directed.

S&F stainless steel grating in ground shape 100mm dia complete all as specified and directed.

S&F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls or laid in floors etc.

S&F soap dish Cat No BA -25 of Prayag polymers Pvt Ltd or equivalent complete all as specified and directed.

S&F 15mm bore U- PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings completed all as specifiec and directed.

Ditto all as per item No 81.00 above but 20 mm bore.

S&F for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 20mm bore complete all as specified and directed.

Supply and fix in repair gun metal gate valve with iron wheel head of size 25 mm with external threaded both ends for connecting to pipe line including all as specified and directed. Make- ZOLOTO/ Leader

Dismantling wrought iron or mild steel work of any escription not otherwise provided for

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition)

Demolition of concrete Concrete of any description and in any position not otherwise specifically provided for

Dismantling plain corrugated sheets of any gauge thickness including nainital or similar pattern roof covering etc

Material and labour for Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in foundation of manholes including necessary formwork complete all as specified and directed.

M & L for plain cement concrete 1 : 3 :6 type C2 using 40 mm graded aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes they are laid and tested for 100 mm bore pipe.

All as per item No 91 above but for 150 mm bore pipe.

All as per item No 91 above but for 200 mm bore pipe.

Material and labour for Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes with concrete after they are laid and tested in 150 mm dia pipe complete all as specified and directed.

Material and labour for Plain Cement Concrete (1:3:6) Type C-2 (using 40 mm graded brocken stone aggregate) as in bed to drain pipe including packing under and haunching against the sides of pipes with concrete after they are laid and tested in 450 mm dia pipe complete all as specified and directed.

M & L for RCC NP3 150mm internal diameter laid in trenches and jointed complete all as specified and directed.

M & L for RCC NP2 450mm internal diameter laid in trenches and jointed complete all as specified and directed.

M&L reinforced concrete pipes, class NP2, 150 mm bore, laid and jointed complete with collars

All as per item no. 98 above, but 200 mm bore

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth(without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick on fair faces of stone masonry or concrete surface in CM 1:4 is to be finished even and smooth(without using extra lime or cement

M & L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even or smooth without using extra cement mixed with WPC 2 % by weight of cement (WPC will be measured and paid separately).

Material and labour for Pre cast reinforced cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in cover slab of manholes including necessary formwork and set in cement mortar 1:4 complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required

M & L for septic tank of 30 users capacity withupflow filter including mediaon site LLDPE to carry sewage and sullage water excavation in any type of soil of PCC 1:4:8 below foundation vent shafts

M & L for RCC Septic tank of 50 users designed to carry sewage and sullage water excavation in any type of soil PCC 1:4:8 blow foundation RCC M -30 design mix in wall base slab baffle walls and roof slab including beam etc with vent shaft manhole opening with cover connection etc complete with effective depth of 1.5 meter and overall depth of 3 m for with upflow filter

M & l Moorum /red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering

M & L for hard core of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 10 cm thick watered and rammed to a true surface complete all as specified.

M & L 75 mm thick Cement concrete type D-2 1:4:8 (40mm graded aggregate) as in Sub-Floors, Sub-Bases, Floors and pavings, etc all as specified and as directed.

M&L for Chequered cement concrete tiles 20x20cmx 25mm thick set, jointed and pointed in near cement slurry in floors with grey cement and pigments including 15 mm thick Screed bed or bedding layer or mortar layer of mortar for laying floor finishes in CM 1:6

M & l for plain Cement concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) as in surface channels and drains finished even and smooth

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.

M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified. Make-MEHTAB/ NATIONAL or equivalent

Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 4 core including necessary connection and providing cable lugs as required all as specified. Make- KEI/ Polycab/Havell's/ Universal

-ditto- all as per above item no 6 but of size 6 sq mm 2 core Make- KEI/ Polycab/Havell's/ Universal

M&L for cutting existing road/hard and dence soil not exc 45x50 cm in wide & depth getting out excaveted materials for laying GI tube; returning filling & well rammin watering finish surface 10 cm from top using PCC 1:3:6 not less than 4 inch thick; including removal of surplas soil all as per directed.

S&F of HDPE pipe 50 mm dia, PN-10 for laying in ground, road crossing etc for cable protection including necessary fittings, clamps for supports, etc all as. Make-Sudhakar/ Prayag

S & F of street light fittings from any height and Supply & fixing LED security light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 6000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) min wattage 60 watt, with ingress protection IP 65/66 and CCT 5700K, CRI >70 Ra, SPD of capacity 5 KV and life span >50000 hrs. etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Note: The GI pipe bracket if required will be measured and paid separately under relevant schedule items. Make:Bajaj/Havells/Crompton/Jaquar

S & F Switch Fuse Unit 16 Amp 415 Volts in TPN Execution conforms to IS : 13947 with Sheet steel enclosure duly phosphatised and powder painted double break with side handle operation positive indication of contacts suitable for surface or wall mounting, door interlock facility, complete all as specified and directed. Make- L&T/ Standard/ C&S/ Havell's

S& F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge

M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers all as shown in Electrical Plate No.3 connected to earthing test point all as specified or indicated including testing on completion.

M & L for point wiring complete with proper colour coding with 1100 Volts grade, 1.5 Sqmm PVC insulated FRLS grade, unsheathed, wire confirming to IS-694, Part II, ISI marked with multistranded copper conductor drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, for mounting modular switches, sockets, fan regulators etc, also including 1.5 Sqmm, PVC insulated, FRLS unsheathed, 1100 Volts multistranded copper conductor green colour as contineous earth wire connected to common earth dolly for one light point/fan/bell point controlled by one way switch, complete all as specified and directed. Note : Rates included for concealed cutting as required at site without any damage and making good in CM 1:4 and matching the surface as required 2 all screws and washer for point wiring shall be Stainless steel. Nothing is extra shall be admisible on this account. Make of Conduit- Sudhakar/ Precision/ Pressfit. Make of copper wire- KEI/ Anchor (Panasonic)/ Polycab/ Finolex.

All as per ser item No 123 above but for one 2pin/3pin socket outlet 5 Amps on same board complete all as specified and directed.

All as per ser item No 123 but for one 5 Amps 2 pin / 3 pin switch socket outlet multipurpose on Independent Board complete all as specified and directed.

All as per item No. 123 above but wiring complete with 2.5 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and directed.

S&F modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed. Make- Anchor(Roma)/ Schnieder/ Legrand

S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed. Make- Anchor(Roma)/ Schnieder/ Legrand

S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed. Make- Anchor(Roma)/ Schnieder/ Legrand

S&F modular type 16 A one way SP switch 2 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed. Make- Anchor(Roma)/ Schnieder/ Legrand

S&F modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed. Make- Anchor/ Schnieder/ Legrand/ Havell's(Crabtree)

S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed

S & F Modular metal flush box with modular cover plate 8 modules

S & F Modular metal flush box with modular cover plate 6 modules

S & F Modular metal flush box with modular cover plate 4 modules

S & F Modular metal flush box with modular cover plate 3 modules

S & F Modular metal flush box with modular cover plate 2 modules

S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB operating on 230 V, 50Hz AC supply complete. Make- L&T/ Indoasian/ Schnieder/ Legrand

S & F in repairs Ceiling Rose, surface bakelite, three terminals, AC, 230 Volts complete. Make- Anchor/ Legrand/ Leader.

S & F in repairs MCB DB 12 way SPN, double door,IP - 43 with 200 Amps rated bus bar, AC and connecting up complete all as specified. Make- L&T/ Indoasian/ Schnieder/ Legrand/ Anchor (Panasonic)

S & F MCB SPN 40 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity. Make- Legrand/ L&T/ INDOASIAN/ Schnieder/ Anchor.

S & F MCB SP 5 to 32 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity. Make- Legrand/ L&T/ INDOASIAN/ Schnieder/Anchor.

M&L for sub main wiring in repairs with two single core 6.0 Sqmm PVC insulated FRLS grade multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 6.0 Sqm single core single of IS 694:1990 strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed. Make of wire- KEI/ Anchore/ Havell's/ Polycab. Make of conduit- Prosfet/ Precision/ Sudhakar. Note : 1. Two runs of cable, one run of earth wire, one run of PVC conduit will be measured and paid one unit.

M&L for sub main wiring in repairs with two single core 1.5 Sqmm PVC insulated FRLS grade multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 1.5 Sqm single core single IS 694:1990 strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed. Make of wire- KEI/ Anchore/ Havell's/ Polycab. Make of conduit- Pressfet/ Precision/ Sudhakar. Note : 1. Two runs of cable, one run of earth wire, one run of PVC conduit will be measured and paid one unit.

M&L for sub main wiring in repairs with two single core 4.0 Sqmm PVC insulated FRLS grade multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 4.0 Sqm single core single IS 694:1990 strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed. Make of wire- KEI/ Anchor/ Havell's/ Polycab. Make of conduit- Pressfet/ Precision/ Sudhakar. Note : 1. Two runs of cable, one run of earth wire, one run of PVC conduit will be measured and paid one unit.

S&F in Surface, hanging and wall mounted batten CRCA housing box type luminaire (Double side connection) suitable for T8 LED tube 20/22 watts, 230 volts rated luminous flux 2400 lm/2280 lm, CCT 6500K, CRI >80, life span >50000 hrs alongwith LED tube with polycarbonate housing designed for high performance tube rod 22 watt (double side connection), including fixing mounting blocks 2 Nos, 15 mm MS conduit, 1.5 sqmm 3 core pvc insulated copper conductor cable including fixing arrangements complete all as specified and directed. Make- Bajaj Cat code no- BLRB/ 20W CW LED S (<10% THD) and BLRB- DB 218 or equivalent Jaquar/ Wipro

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC made out of engineering battenwith white acrylic cover sleek design & high efficiency for wall & surface mounted aapplications comprising with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed. Make- Jaquar/ Wipro/ Bajaj

Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 8000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) min wattage 60 watt, with ingress protection IP 65/66 and CCT 5700K ± 355K , CRI >70 SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Jaquar/Wipro

Supply & fix high speed Ceiling fans complete with aluminium blades, down rods, PVC Canopy and accessories white in color 230 V, 1200 mm sweep Min air delivery 210 CFM with service value min 6.00 BEE Five star rated with brushless direct current motor (BLDC) without remote complete. Make- Havell's (Efficiencia Neo (BLDC 26W)/ Orient (FALCON 400)/ Bajaj(ENERGOS 28))

Supply and fix heavy duty Metalic body Exhuast fan high speed type of sweep 300mm, speed 1400 RPM, air delivery 1300 CMH, power 70W comprising of double ball bearing,blades,louvers complete mounting anchor fasterners aluminium louvers made of aluminium sheet of 0.5 mm thickness provision of 3 core 1.5 sqmm copper cable from ceiling rose to fan etc complete all as specified and directed. Make- Crompton/ Orient/Almonard/Bajaj. Note-The Contractor shall submit 1 year warrenty ceertificate from OEM of exhaust fan.

Cutting of existing GI pipe of size 50x25 mm dia by excavation the trenches and insertion of GI tee of size 50mm x 50mm x 4mm dia including ferreling and all GI accessories for tapping of water supply mainscomplete including returning filling and making good of disturbed surfaces and testing of complete all as specified and directed by Engg in Charge.

Supply, lay/fix, connect and testing steel water tubing of 25 mm bore, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings and fixtures, clamps and fixed to wall/ceiling or laid in trenches/floors complete all as specified and directed. Make- Jindal/ TATA/ Surya Prakash

M & L for Construction of valve pit chamber of follwong sizes with brick massonary, one brick thick wall in cement mortor (1:4) on 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in fdn, 15 mm thick cement & plaster rendering internally all arround over brick wk & externally upto 15cm below normal GL with 10 SWG thick MS sheet cover incld 40 x 40 x 6mm MS angle frame fixed locking arrangement and painting with one coat of red oxide and two coats of black Bituminous paints of size 900mm x 900mm x 900mm.

Supply and installation, commisioning of water cooler fully Stainless Steel body,Stainless Steel tank,Easy controls,Adjustable cold water thermostat,Seam welded stainless steel tank,Pre-coated outer body for better corrosion resistance,Mechanically expanded condenser,Front panel in stainless steel, Electric driven (single phase) 5 star rating having approx storage capacity of 80 Ltr and nominal cooling capacity of 40 Liters per hour. Make :- Voltas/ Blue Star/ USHA

M & L for PVC connections 15mm size with PTMT nuts of length 900mm complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors ball valve of 16 mm complete all as specified. Make- Finolex/ Dutron/ SFMC/ Prince pipe

S & F PVC drain pipe of size 5/8" bore for suitable for Water cooler as waste pipe duly connected to drain complete all as specified and as directed. Make- Finolex/ Prince pipe/ Supreme

Taking down carefully point wiring of any type & pattern (Light/Fan/Socket or power) including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good distribution surfaces to walls floors etc.

Taking down complete main switches/DBs with enclosure and its components of any size and capacity ,etc Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) complete all as specified and directed.

Taking down ceiling fan/exhaust fan, sealing cable end dismantling blades and removing fan and blades and keeping in safe custody for deposited to AGE E/M store.

Dismantling and taking down flouroscent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to AGE E/M store to issue under (credit for above items should be made as per conditions separately).

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc & removal of debris out side md land complete all as specified

M & L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built CM 1:4 complete all as specified.

Supply only intergal water proofing compound. (ISI Marked).

Demolition of reinforced cement concrete as in drain cover slab(Reinforcement cut to facilitate demolition) for any thickness and any specification complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4 type B-1 (20mm graded agg) as in cover slab for manholes set in CM 1:4 including necessary form work.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) , 100 mm dia, set in cement mortar

All as per item no. 167 above, but 200 mm dia Note : A sum of Rs 4566.00 towards sch of credit shall be deducted to arrive the contract sum.

Joy builders

Vishal Builders

mp construction co

A G ENTERPRISES

M/S KHUSHI ENTERPRISES

sapana enterprises