CERTAIN SANCTIONED LBW AND MINOR WORKS OF B/R AND E/M NATURE AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Excavation in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cum complete all as specified and as directed.

Removal of excavated material as soils not exceeding 50m and at a level not exceeding 1.5m above the starting point and depositing complete all as specified and as directed.

Material and labour for cement concrete M-10 (Nominal mix) (using 40 mm graded crushed stone aggregates) in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm straight of curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Supply only broken brick bats aggregate 63 mm nominal size complete all as specified and as directed.

Material and labour for hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregates) as in sub base to floor finishes complete all as specified and as directed.

Material and labour for non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Material and labour for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tube for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solovent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in mild steel frame welded sealed to the stiles and rail with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing butt hinges 100 mm long, heavy weight, cold rolled mild steel and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised, handles 125 mm of extruded section and fixed complete all as specified and as directed.

Supply and fixing aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed complete all as specified and as directed.

Material and labour for formwork with rough finished to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm complete all as specified and as directed.

Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works not exceeding 20 cm wide and sides of PCC/RCC bands exceeding 10 cm but not exceeding 20 cm wide with rough finished complete all as specified and as directed.

Material and labour for form work to sides and soffits of floor or roof beams, beam haunching, lintel etc rough finished surfaces of concrete flats complete all as specified and as directed.

Material and labour for RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls beams and columns in floors, roofs, landings, balcony, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for RCC (1:2:4) type B-1 (using 20 mm graded crushed stone agggregate) as in beams, cantilevers, bressummers, lintel over 1.5 m span complete all as specified and as directed.

Material and labour for TMT bars (Fe-500), 10mm dia and over in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Description all as per Ser item No 22.00 here-in-before but 8 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5 mm thick on concrete surface as in ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 50 mm thick cement concrete (1:2:4), type B-2 (using 40mm graded crushed stone aggregate) as in plinth protection finished even and smooth using extra cement (including necessary joint filling with mixture of paving bitumen and sand in (1:3)) complete all as specified and as directed.

Material and labour for 100 mm thick cement concrete (1:2:4), type B-2 (using 40mm graded crushed stone aggregate) as in sub base to path etc with rough finished to receive floor finishes complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper (including for finishing to dry dash or rough cast) over a coat of chalk whiting on plastered surfaces, preparatory to distempering complete all as specified and as directed.

Material and labour for preparing newly plastered or concrete surfaces of wall and applying two coats of cement based paint over a coat of white wash complete all as specified and as directed.

Material and labour for preparing newly plastered surfaces and applying three coats of white wash as in ceiling etc. complete all as specified and as directed.

Supply and fixing vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed.

Supply and fixing urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 grams) complete all as specified and as directed.

Material and labour for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and including screed bed or bedding layer of mortar 15mm thick for laying floor in cement mortar (1:4) finished even and rough to receive top layer complete all as specified and as directed.

Supply and fixing vitreous china wash basin, white flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including vitreous china pedestal complete all as specified and as directed.

Supply and fixing brass chromium plated tubular towel rail 20 mm dia, 'D' type 60 cm long between flanges complete all as specified and as directed.

Supply and fixing pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia bore of pipe complete all as specified and as directed.

Supply and fixing stop valve / angle valve (ISI marked), fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

Supply and fixing PVC connection 15 mm bore with PTMT nuts of length 450 mm long complete all as specified and as directed.

Supply and fixing steel water tubing 15 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Supply and fixing steel water tubing 20 mm bore medium grade galvanised with all fittings (ISI marked) fixed complete to walls, ceiling or laid in floors complete all as specified and as directed.

Cutting existing steel tubing bore in 25 or 32 mm for alterations or additions (Each cut measured) and if necessarily done in position without taking down complete all as specified and as directed.

Material and labour for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, capacity in 500 litres complete all as specified and as directed.

Supply and fixing 20 mm bore ball brass valves, high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and fixing stop valve (ISI marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore and fixed complete all as specified and as directed.

Material and labour for PVC (SWR) multifloor trap, dia of outlet in 75 mm, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fixing 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cum in any type of soil, getting out, returning, fillimg in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm thick watering and well ramming and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.

Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-0 (using 20mm graded crushed stone aggregate) as in getting proper slope / covering complete all as specified and as directed.

Material and labour for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Material and labour for mild steel work in tubular trusses or rectangular hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS-1239 (Part I-1990) complete all as specified and as directed.

Material and labour for rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Grade Fe-410-S complete all as specified and as directed.

Material and labour for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing 12 mm dia mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, not exceeding 15cm long complete all as specified and as directed.

Material and labour for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

E/M Portion: - Material and labour for point wiring for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 Sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green color complete all as specified and as directed by Engineer-in-Charge.

Material and labour in replacement for sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 3 run 4 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing/new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Supply and fixing electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV with PTMT nuts and connection pipes hot and cold alongwith required fasteners for fitting and rawl plugs, any length with rubber ring joints fixed to walls, Hot and cold pipes, etc complete all as specified and as directed.

Supply and fixing angle valves chromium plated screwed both ends for 15mm bore of iron pipe or for union and fixed each complete all as specified and as directed.

Supply and fixing modular switch socket combination 16A, 6 pin, 3 module complete all as specified and as directed.

Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

Supply and fixing bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing modular metal flush box 3 module complete all as specified and as directed.

Supply and fixing modular white cover plate with frame 3 module complete all as specified and as directed.

Supply and fixing plug top 15 amps complete all as specified and as directed.

M/S TRIKUTA BUILDERS (BID ID -3185498)

Sarbat Construction Co (BID ID -3191197)

M/s ATHARAV ELETCTRICALS (BID ID -3190924)

M/S VED PAUL MAHAJAN (BID ID -3190459)

M/s EMM KAY BUILDERS (BID ID -3191652)