Loading…
Loading…
Tender Value
₹73.0 Cr
EMD Value
₹73.0 L
Closing Date
4 May 2026, 3:00 pmClosed
The Engineer-in-Chief (R&B) SR CRN MD TGRDC HYD
Sangareddy
Development of Sri Mahalaxmi Venkateshwara Swamy Devasthanam and Temple Precinct Balajinagar, Kodangal, Vikarabad Telangana
697412
e NIT No.Kodangal/CTN/DCE (R)/EE (R)/DEE1/AEE/2025-26 Dt 28-03-2026
OPEN
Civil Engineering Works
VIKARABAD
21 documents required · 19 mandatory · 2 optional
₹29,500
₹73.0 L
27 Apr 2026
27 Apr 2026
27 Apr 2026
Part - B: Main Temple
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. Upto 3m Depth
Filling with useful available excavated earth (excluding rock) by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)
Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).
Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING.
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING.
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. for Footings
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. for Grade Slab - 200mm thk
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. for Plinth Beams
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS.Columns - un-supported height of 3.66m for Gound Floor.
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 3.66m for Construction of Prakara Mandapam & Prakaram walls for Gound Floor.
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 3.66m for First Floor .
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 3.66m for Construction of Five Storied Rajagopuram for Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 3.66m for Third Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 3.66m for Construction of Five Storied Rajagopuram for Fourth Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. Slab 150mm thk - un-supported height of 3.66m for Construction of Five Storied Rajagopuram for Fifth Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) for Ground Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) for First Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) for Second Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) for Third Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) For Construction of Five Storied Rajagopuram for Fourth Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) For Construction of Five Storied Rajagopuram for Fourth Floor
Supply of granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi). for Cost of stone - 1 to 20 Cft
Supply of granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi). for Cost of stone - 20 to 40 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi). for Cost of stone - 40 to 60 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi). for Cost of stone - 60 to 80 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi). for Cost of stone - 80 to 100 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi). for Cost of stone - Above - 100 Cft
Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. for Construction of Prakara Mandapam & Prakaram walls
Labour charges for dressing and carving of Cut Stone Flooring works in granite stone. The rate is including Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Fine Dressing - Five line Palamana dressing for Granite stone not less than 12"x 24" uniform size and thickness not less than 4" for Construction of Prakara Mandapam & Prakaram walls
Labour charges for dressing and carving of Cut Stone Flooring works in granite stone. The rate is including Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Labour Charges for Jointing for Construction of Prakara Mandapam & Prakaram walls
Supply of Granite stones of various sizes for Rajagopuram - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) for Door Frame upto 9'-0" to 12'-0" Height for Construction of Three Storied Rajagopuram (North, South &West Side)
Supply of Granite stones of various sizes for Rajagopuram - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) for Door Frame upto 12'-0" to 16'-0" Height for Construction of Five Storied Rajagopuram
Labour charges for dressing and carving of Rajagopuram - Door Frame in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Rough Dressing
Labour charges for dressing and carving of Rajagopuram - Door Frame in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana Fine Dressing - Five Line Palmana including of fine dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones
Labour charges for dressing and carving of Rajagopuram - Door Frame in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Fixing Charges - Five Storied Rajagopuram
Labour charges for dressing and carving of Rajagopuram - Door Frame in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Fixing Charges - Three Storied Rajagopuram
Supply of Granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) for Door Frame above 7'-0" Height for Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams.
Labour charges for dressing and carving of Garbhalayam and Ardha Mandapam - Door Frames in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Rough Dressing for Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams.
Labour charges for dressing and carving of Garbhalayam and Ardha Mandapam - Door Frames in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana Fine Dressing - Five Line Palmana instead of fine dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones for Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams.
Labour charges for dressing and carving of Garbhalayam and Ardha Mandapam - Door Frames in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Fixing Charges - Above 7'-0" to 9'-0" Height for Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams.
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Rough Dressing for Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams.
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Garbhalayam & Antralayam Chitra Vanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Garbhalayam & Antralayam Upapeetam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Garbhalayam & Antralayam Adhistanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Garbhalayam & Antralayam Sthambhavargam L-1, Sthambhavargam L-2, Prastaram
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Roof Stones:- Garbhalayam, Roof Stones:- Antralayam, Steps
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam ALLROUND PEETAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam ALLROUND BEAMS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam ROOF STONES
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam KODUNGAI
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam VYALAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam GARUDALWAR
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam MANDAPAM STEPS:-
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam DWAJAM PEETAM:-
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Maha Mandapam, Garudalayam & Dwajam 3 Storied Vimanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Goda Devi Garbhalayam & Antralayam C VANAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Goda Devi Garbhalayam & Antralayam UPAPEETAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Goda Devi Garbhalayam & Antralayam ADHISTANAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Goda Devi Garbhalayam & Antralayam STHAMBHAVARGAM, PRASTARAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Goda Devi Garbhalayam & Antralayam GARBHALAYAM ROOF STONES:-, STEPS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Goda Devi Garbhalayam & Antralayam GARBHALAYAM SOMASUTRAM WITH YALITALA
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Goda Devi Garbhalayam & Antralayam GARBHALAYAM ABOVE ROOF LEVEL:-
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Maha Lakshmi Garbhalayam & Antralayam C VANAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Maha Lakshmi Garbhalayam & Antralayam UPAPEETAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Maha Lakshmi Garbhalayam & Antralayam ADHISTANAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Maha Lakshmi Garbhalayam & Antralayam STHAMBHAVARGAM, PRASTARAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Maha Lakshmi Garbhalayam & Antralayam GARBHALAYAM ROOF STONES:-, STEPS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Maha Lakshmi Garbhalayam & Antralayam SOMASUTRAM WITH YALITALA
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Palmana fine dressing for Sri Maha Lakshmi Garbhalayam & Antralayam ABOVE ROOF LEVEL:-
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Jointing Charges
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Upapeetam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Adhistanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Sthambhavargam, Prastaram
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Roof Stones
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Portico:- Pillars, Portico:- Beams
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Portico:- Roof Stones
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Portico:- Kodungai
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Portico:- Vyalam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Five Storied Rajagopuram for Palmana fine dressing Portico:- Salaharam, Arches
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Jointing Charges
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Three Storied Rajagopuram (North, South &West Side) for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Three Storied Rajagopuram (North, South &West Side) for Palmana fine dressing Upapeetam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Three Storied Rajagopuram (North, South &West Side) for Palmana fine dressing Adhistanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Three Storied Rajagopuram (North, South &West Side) for Palmana fine dressing Sthambhavargam, Prastaram
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Three Storied Rajagopuram (North, South &West Side) for Palmana fine dressing Roof Stones
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Three Storied Rajagopuram (North, South &West Side) for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Three Storied Rajagopuram (North, South &West Side) for Jointing Charges
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Construction of Prakara Mandapam & Prakaram walls for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for North West Prakara Mandapam ALLROUND PEETAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for North West Prakara Mandapam PILLARS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for North West Prakara Mandapam STONE BEAMS:- HORIZONTAL VERTICAL BEAMS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for North West Prakara Mandapam KODUNGAI
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for North West Prakara Mandapam ALLROUND VYALAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for North West Prakara Mandapam SALAHARAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for North West Prakara Mandapam ADDALA MANDAPAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for North West Prakara Mandapam STONE STEPS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for South West Prakara Mandapam ALLROUND PEETAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for South West Prakara Mandapam PILLARS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for South West Prakara Mandapam STONE BEAMS:- HORIZONTAL VERTICAL BEAMS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for South West Prakara Mandapam KODUNGAI
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for South West Prakara Mandapam ALLROUND VYALAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for South West Prakara Mandapam SALAHARAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for South West Prakara Mandapam STRONG ROOM, VEDIKA PEETAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing for South West Prakara Mandapam STONE STEPS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing North East Prakara Mandapam ALLROUND PEETAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing North East Prakara Mandapam PILLARS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing North East Prakara Mandapam STONE BEAMS:- HORIZONTAL VERTICAL BEAMS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing North East Prakara Mandapam KODUNGAI
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing North East Prakara Mandapam ALLROUND VYALAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing North East Prakara Mandapam SALAHARAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing North East Prakara Mandapam SRI VISWANATHA ALWAR SANNIDHI SRI ACHARYA SANNIDHI
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing North East Prakara Mandapam STONE STEPS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing South East Prakara Mandapam ALLROUND PEETAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing South East Prakara Mandapam PILLARS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing South East Prakara Mandapam STONE BEAMS:- HORIZONTAL VERTICAL BEAMS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing South East Prakara Mandapam KODUNGAI
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing South East Prakara Mandapam ALLROUND VYALAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing South East Prakara Mandapam SALAHARAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing South East Prakara Mandapam SRI VAKULA MATHA MANDAPAM
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing South East Prakara Mandapam STONE STEPS
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Palmana fine dressing Allround Stone Prakaram walls
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. Jointing Charges
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. for First Floor
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. for Second Floor
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. for Third Floor
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. for Fourth Floor Construction of Five Storied Rajagopuram
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. for Fourth Floor Construction of Five Storied Rajagopuram
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for First Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Second Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Third Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Fourth Floor Construction of Five Storied Rajagopuram
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Fourth Floor Construction of Five Storied Rajagopuram
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for First Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for Second Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for Third Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Fourth Floor Construction of Five Storied Rajagopuram
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Fourth Floor Construction of Five Storied Rajagopuram
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc. for First Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc. for Second Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc. for Third Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc. for Fourth Floor Construction of Five Storied Rajagopuram
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc. for Fourth Floor Construction of Five Storied Rajagopuram
Providing Pancha colour paint two coats over primary coat to Vigrahams or temples with best synthetic enamel paint (Apco light, Asian / Brazer make) as per approved matching colour including cost and conveyance of all materials, labour charges, brushes etc., complete (as per Silpi Standards). But excluding seigniorage charges and taxes like GST etc.
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Sri Paravasu deva
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Sri Venkateswara swamy
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Sri Vaikunta narayana moorthy
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Sri Varaha moorthy
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Sri Venkateswara swamy
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Sri Narasimha Moorthy & Garudalawars in Kantam corners
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Simhams
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Main Balipeetam
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. A. SRI VENKATESWARA SWAMY TEMPLE:- for Small Balipeetams
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. SRI GODA DEVI TEMPLE STATUES Kantam Vigrahams for Sri Andal Thayar
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. SRI GODA DEVI TEMPLE STATUES Kantam Vigrahams for Sri Aiswararya Laxmi
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. SRI GODA DEVI TEMPLE STATUES Kantam Vigrahams for Simhams
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. SRI MAHA LAXMI TEMPLE STATUES Kantam Vigrahams for Sri Maha Laxmi
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. SRI MAHA LAXMI TEMPLE STATUES Kantam Vigrahams for Sri Aiswararya Laxmi
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. SRI MAHA LAXMI TEMPLE STATUES Kantam Vigrahams for Simhams
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. SOUTH SIDE TRITHALA RAJAGOPURAM VIGRAHAMS LIST:- for South Side Entrance Dwarapalakas
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. SOUTH SIDE TRITHALA RAJAGOPURAM VIGRAHAMS LIST:- for Peetam
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. WEST SIDE TRITHALA RAJAGOPURAM VIGRAHAMS LIST:- for West Side Entrance Dwarapalakas
Supply & Preparation & fixing of Sri Venkateshwara Swamy Temple Stone Vigrahams, Construction of Garbhalayam, Ardha Mandapam, Mandpam, Garudalayam, Dwajam, Sri Godadevi, Sri Mahalakshmi Temples & Stone Vigrahams. WEST SIDE TRITHALA RAJAGOPURAM VIGRAHAMS LIST:- for Peetam
Supply & Preparation & fixing of best Teak Wood / Non - Teak Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - Finished item including Material & Labour Charges etc. for Material Charges
Supply & Preparation & fixing of best Teak Wood / Non - Teak Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - Finished item including Material & Labour Charges etc. for Labour Charges
Supplying and fixing of scaffolding including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges etc., compete.
Supply & fixing of Copper Stoopi - Upto 2'-0" ht (18to20 gauge) including cost and conveyance of all materials and labour charges etc., complete.
Supply and fixing of Brass Kalasams Sthoopi upto 5'0" ht (16 to 18 gauge) including cost and conveyance of all materials and labour charges etc., complete.
Providing of 80 tonnes Crane Charges for Lifting of Stone material purpose including overheads & contractors profit etc.
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X4'-3"X 12'-9") WITH 3 BALAPADAMS WITH SIMHAMS MADALAI AND ABOVE REST ASPER DESIGN FOR 4 No.s for Cost of Stone
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X4'-3"X 12'-9") WITH 3 BALAPADAMS WITH SIMHAMS MADALAI AND ABOVE REST ASPER DESIGN FOR 4 No.s for Cost of StoneRough Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X4'-3"X 12'-9") WITH 3 BALAPADAMS WITH SIMHAMS MADALAI AND ABOVE REST ASPER DESIGN FOR 4 No.s for Fine Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X4'-3"X 12'-9") WITH 3 BALAPADAMS WITH SIMHAMS MADALAI AND ABOVE REST ASPER DESIGN FOR 4 No.s for Tool making material like chisels, Charcoal for furnace etc., for fine Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X4'-3"X 12'-9") WITH 3 BALAPADAMS WITH SIMHAMS MADALAI AND ABOVE REST ASPER DESIGN FOR 4 No.s for Jointing charges
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X5'-6"X 12'-9") WITH 4 BALAPADAMS AND ABOVE REST ASPER DESIGN FOR 14 No.s for Cost of Stone
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X5'-6"X 12'-9") WITH 4 BALAPADAMS AND ABOVE REST ASPER DESIGN FOR 14 No.s for Cost of StoneRough Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X5'-6"X 12'-9") WITH 4 BALAPADAMS AND ABOVE REST ASPER DESIGN FOR 14 No.s for Fine Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X5'-6"X 12'-9") WITH 4 BALAPADAMS AND ABOVE REST ASPER DESIGN FOR 14 No.s for Tool making material like chisels, Charcoal for furnace etc., for fine Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (5'-6"X5'-6"X 12'-9") WITH 4 BALAPADAMS AND ABOVE REST ASPER DESIGN FOR 14 No.s for Jointing charges
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X5'-3"X 12'-9") WITH 1 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 4 No.s for Cost of Stone
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X5'-3"X 12'-9") WITH 1 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 4 No.s for Cost of StoneRough Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X5'-3"X 12'-9") WITH 1 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 4 No.s for Fine Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X5'-3"X 12'-9") WITH 1 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 4 No.s for Tool making material like chisels, Charcoal for furnace etc., for fine Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X5'-3"X 12'-9") WITH 1 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 4 No.s for Jointing charges
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X6'-6"X 12'-9") WITH 2 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 2 No.s for Cost of Stone
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X6'-6"X 12'-9") WITH 2 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 2 No.s for Cost of StoneRough Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X6'-6"X 12'-9") WITH 2 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 2 No.s for Fine Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X6'-6"X 12'-9") WITH 2 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 2 No.s for Tool making material like chisels, Charcoal for furnace etc., for fine Dressing
Supply of Granite stones of various sizes for Anivotti & Yali Pillar works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. Labour charges for dressing and carving of Anivotti & Yali Pillar in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. ANIVOTTI PILLAR (6'-6"X6'-6"X 12'-9") WITH 2 BALAPADAMS AND 2 YALIS ABOVE REST ASPER DESIGN FOR 2 No.s for Jointing charges
Part - C: Sub Temples
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. Upto 3 M depth
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Manual Means. Upto 3 M depth
Filling with useful available excavated earth (excluding rock) by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)
Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).
Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed Granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm)"," from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Footings
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Grade Slab -150mm thk
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Plinth Beams
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Pedestals
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. For Columns - un-supported height of 3.66m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. For Columns - un-supported height of 4.27m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. For Columns - un-supported height of 8.54m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. For RCC walls - 230mm thk - un-supported height of 3.66m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Beams - un-supported height of 3.66m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Beams - un-supported height of 4.27m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Beams - un-supported height of 8.54m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Slab 150mm thk - un-supported height of 3.66m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Slab 150mm thk - un-supported height of 4.27 m for Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. For Slab 150mm thk - un-supported height of 8.54 m for Ground Floor
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. For Lintels - un-supported height of 3.66m
Supply and placing of the Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed Granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., for 60 cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting concrete, laying concrete, curing, cost of overheads & contractors profit complete etc., but excluding cost of steel and its fabrication charges for finished item of work for sunshades (APSS No. 402, 403 & 903) & 903) for Chajjas/Sunshades - un-supported height of 3.66m
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) For Ground Floor
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) For Cost of stone - 1 to 20 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) For Cost of stone - 20 to 40 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) For Cost of stone - 40 to 60 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) For Cost of stone - 60 to 80 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) For Cost of stone - 80 to 100 Cft
Supply of Granite stones of various sizes for Temple Structure works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) For Cost of stone - Above - 100 Cft
Supply of Granite stones of various sizes for Cut Stone Flooring works and minimum sizes of flooring 12"x24"x4" as directed by the sthapathi. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete.
Labour charges for dressing and carving of Cut Stone Flooring works in granite stone. The rate is including Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Fine Dressing - Five line Palamana dressing for Granite stone not less than 12"x 24" uniform size and thickness not less than 4".
Labour charges for dressing and carving of Cut Stone Flooring works in granite stone. The rate is including Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete. for Labour Charges for Jointing
Supply of Granite stones of various sizes for Garbhalayam and Ardha Mandapam - Door Frame works. The rate is including quarrying, wedging, cut in to shapes, loading at quarry, unloading at work site, including cost and conveyance of stones , from quarry to work site , incidental charges etc., complete. (Note:-as per the Silpi SSR 2024-25 Taken measurements for cost of stone shall be allowed extra 0'-3"/ Three inches in length and Bredth of actual erected stone for supply stone quantity as per layer plan/ instructed by the Sthapathi) For Door Frame above 7'-0" Height
Labour charges for dressing and carving of Garbhalayam and Ardha Mandapam - Door Frames in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Rough Dressing
Labour charges for dressing and carving of Garbhalayam and Ardha Mandapam - Door Frames in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Palmana Fine Dressing - Five Line Palmana instead of fine dressing and polishing and padmams at top & bottom, Nagabhandam on vertical stones
Labour charges for dressing and carving of Garbhalayam and Ardha Mandapam - Door Frames in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Fixing Charges - Above 7'-0" to 9'-0" Height
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhoo Varaha Swamy Temple for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhoo Varaha Swamy Temple for Palmana fine dressing Upapeetam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhoo Varaha Swamy Temple for Palmana fine dressing Adhistanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhoo Varaha Swamy Temple for Palmana fine dressing Sthambhavargam, Prastaram
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhoo Varaha Swamy Temple for Palmana fine dressing Roof Stones, Steps
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhoo Varaha Swamy Temple for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhoo Varaha Swamy Temple for Tool making material like chisels, Charcoal for furnace etc., for Jointing Charges
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Allround Peetam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Pillar up to Podika Bottom, Palika Padmam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Corner Podikas
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Beams
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Kodungai
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Vyalam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Salaharam, Kantam, Shikaram
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Roof Stones
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Allround Peetam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Pillars
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Palika Padmam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Podikas
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Beams
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Kodungai
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Vyalam & Vedika
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Shikaram & Kantam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing Roof Stones & Steps
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Palmana fine dressing For Pushkarni Steps
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini) for Jointing Charges
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Palmana fine dressing Upapeetam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Palmana fine dressing Adhistanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Palmana fine dressing Sthambhavargam, Prastaram
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Palmana fine dressing Roof Stones & Steps
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Jointing Charges
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Palmana fine dressing C Vanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Palmana fine dressing Adhistanam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Palmana fine dressing Sthambhavargam, Prastaram
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Palmana fine dressing Roof Stones & Steps
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Sri Bhedi Anjaneya Swamy Temple for Jointing Charges
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Nandi, Dwajasthambam and Balipeetam at Sri Bheemeshwara Swamy Temple for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Nandi, Dwajasthambam and Balipeetam at Sri Bheemeshwara Swamy Temple for Palmana fine dressing Nandi Peetam, Dwajam Peetam & Balipeetam
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Nandi, Dwajasthambam and Balipeetam at Sri Bheemeshwara Swamy Temple for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Nandi, Dwajasthambam and Balipeetam at Sri Bheemeshwara Swamy Temple for Jointing Charges
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Kakatiya Historical Stone Base for Rough Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Kakatiya Historical Stone Base for Palmana fine dressing Kakathiya Historical Stone Base
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Kakatiya Historical Stone Base for Tool making material like chisels, Charcoal for furnace etc., for palamana dresing for Five line Dressing
Labour charges for dressing and carving of Temple Structures in granite stone. The rate is including Rough dressing, Palmana Fine Dressing and jointing labour charges for both skilled and unskilled with smothy materials and lobour charges But excluding cost of granite stone and jointing like cement and sand etc., complete.for Construction of Kakatiya Historical Stone Base for Jointing Charges
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. For Ground Floor
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. For First Floor
Random Rubble stone masonry in CM (1:6) prop: (Cement: Screened sand) using Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand (with 50% river sand & 50% manufactured sand), water, stones etc., to site, labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc.,complete for finished item of work in foundation and basement. (APSS No. 601 & 615).
CR stone masonry in 2nd sort in CM (1:6) prop: (cement : sand) using Granite stones from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., and overheads & contractors profit, complete for finished item of work in foundation & basement. (APSS No. 615 & 601)
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) . forGround Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) . for Ground Floor Construction of Balalayam
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) for Ground Floor Construction of Archka Quarters - 2 no.s
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Ground Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for Ground Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for First Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc. for Ground Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc.) for First Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). for First Floor
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) for Ground Floor Construction of Archka Quarters - 2 no.s
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge. for Ground Floor Construction of Archka Quarters - 2 no.s
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) for Ground Floor
Skirting with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece with edges flat nosed set over a base coat of CM (1:5) 12 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work (APSS No.701 & 707) for Ground Floor Construction of Chakra Snana Koneru & Vedika (Sri Vari Pushkarini)
Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work. (APSS No.701 & 707) for Ground Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special) Ground Floor:
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special) Ground Floor:
Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick 0.457m x 0.304m or any other size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, flooring stones etc. complete, all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701) Ground Floor:
Providing skirting to internal walls with Polished Shahabad/Tandur stone slabs 15mm to 18mm thick, length equal to flooring stones set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand (with 50% river sand & 50% manufactured sand) and water etc., complete and overheads & contractors profit complete for finished item of work.(APSS No.701 &707) Ground Floor:
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty.
Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty for Ground Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty for First Floor
Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats. for Construction of Dhanyagaram, Yagashala & Kitchen
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 127*115 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 75 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.83 X 2.13m) for Construction of Balalayam
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 170*150 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 75 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 8 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 2.44 X 2.74m) for Construction of Vaahanashala Mandapam
Providing Pancha colour paint two coats over primary coat to Vigrahams or temples with best synthetic enamel paint (Apco light, Asian / Brazer make) as per approved matching colour including cost and conveyance of all materials, labour charges, brushes etc., complete (as per Silpi Standards). But excluding seigniorage charges and taxes like GST etc.
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec: 1108, including cost and conveyance of all materials, all operational, incidental labour charges, overheads and contractor's profit complete for finished item of work. for Construction of Rathashala Mandapam
Providing and fixing factory-made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast and 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58- 60 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -in- Charge and Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 200 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 250 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long & 4 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Single Shutter Door size 0.75 X 2.10m) for Construction of Archka Quarters - 2 no.s
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.91 X 2.13m) for Construction of Archka Quarters - 2 no.s
Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. for Construction of Archka Quarters - 2 no.s
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 200 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 250 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.90 X 2.10m) for Construction of Dhanyagaram, Yagashala & Kitchen
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
Painting to flush shutters two coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit over wood primer coat including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper for neat finish etc., complete and including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors. for Construction of Dhanyagaram, Yagashala & Kitchen
Supply and fixing of roofing with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove, including cost and conveyance of all materials, all operational, incidental labour charges, overheads and contractor's profit complete for finished item of work.
Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work.
Supplying and fixing of MS doors, grill to windows, ventilators / in open court yards using MS square bars, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, including cost and conveyance of all Mild steel sections and all wastages such as overlaps, couplings, welded joints, etc., and all operational, incidental charges, Including Labour charges for fabricating all heavy steel works like Trusses,Stanchions, Heavy Beams and Girders including cost of welding rods, power charges, etc and Labour charges for fixing Trusses, Stanchions, Heavy Beams and Girders erecting and fixing in position by using chain pulley blocks, Derek pole arrangements and cranes etc., including overheads and contractor's profit complete for finished item of work.
Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades using ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
Providing & fixing on roof pressed clay tile (Mangalore tile) of size - 9 x 6 inches and as per approved pattern on roof jointed with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement including cost and conveyance of all materials like roof tiles, cement, sand(with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges & curing etc., and overheads & contractors profit complete for finished item of work. for Construction of Balalayam
SSupply & Preparation & fixing of best Teak Wood / Non - Teak Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - Finished item including Material & Labour Charges etc. for Material Charges
SSupply & Preparation & fixing of best Teak Wood / Non - Teak Ornamental door shutters with two leaves as per standard temple design includig cost of frame and planks and preparation charges. Fixing of shutters in position locking arrangements etc., complete. Door shutter with Best Teak Wood frame of 2" thick, Single Padmams of 2.5" thick and Best Teak Wood rare plank of thickness 1.5" - Finished item including Material & Labour Charges etc. for Labour Charges
Supplying and fixing of scaffolding including cost and conveyance of all materials such as casurina poles, bamboo mats and coir rope etc., including labour charges etc., compete.
Supply and fixing of Metal Sthoopy (16 to 18) guage with Sthoopi dandam, Brahma Randram Stone, (Gandhapu - Raie) including cost and conveyance of all materials and labour charges etc., complete. For Construction of Sri Bhoo Varaha Swamy Temple
Supply and fixing of Metal Sthoopy (18 to 20) guage with Sthoopi dandam, Brahma Randram Stone, (Gandhapu - Raie) including cost and conveyance of all materials and labour charges etc., complete.
Providing cement vigrahams, using cement, sand, steel reinforcement, iron mesh, brick bats, flat tiles etc., including cost and conveyance of all materials, labour charge etc., compete.
Providing of Somasutramin for finished item of work including cost and conveyance of all materials, labour charge etc., compete.
Providing of 80 tonnes Crane Charges for Lifting of Stone material purpose including overheads & contractors profit etc.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness by Mechanical means as per the Techinical Specification Clause 201 MoRTH 5th Revision (IN AREA OF LIGHT JUNGLE) for Site Development works (Pathways) at Balalayam
Earthwork excavation in soils upto SDR by mechanical means including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete including for finished item of work for trench cutting as per MoRT&H specification 301(5th Revision) and as directed by the Engineer-in-Charge for Site Development works (Pathways) at Balalayam
Construction of Granular sub-base by providing HBG/HBT material confirming to Grading - VI of MoRT&H Table 400-1 including cost, (excluding seigniorage charges) and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment Based on Levels) for Site Development works (Pathways) at Balalayam
Providing Vibrated Cement Concrete (1:4:8) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement. for Site Development works (Pathways) at Balalayam
Supply, Laying and Fixing of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over a base coat of 50mm thk sand bed including cost and conveyance of all materials like sand, water tiles etc.,to site, labour charges for loading & unloading, laying to desired lines and levels complete and Overheads & Contractor Profit etc. for finished item of work. for Site Development works (Pathways) at Balalayam
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 440 mm high as shown in drawing in M 20 grade PCC, kerb stone laid with kerb laying machine, all complete as per clause 408 for Site Development works (Pathways) at Balalayam
Painting 2 coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface as per Tech Specification 800 MORTH (5th revision) and as directed by the Engineer in charge. for Site Development works (Pathways) at Balalayam
Part - D: Infrastructure Development
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means. Upto 3m Depth
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Manual Means. Upto 3m Depth
Filling with useful available excavated earth (excluding rock) by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310)
Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310).
Conveyance of un-useful excavated earth to an average distance of 1 KM using mechanical means with unloading by manual means within the construction site for disposal and filling & levelling of low lying areas as per the instruction of the Engineer-in-charge including cost and conveyance of all materials, all operational, incidental labour charges and overheads & contractors profit complete for finished item of work.
Providing post construction anti termite treatment by drilling 1/2 inch dia., holes at the edges of wall floor junction and pouring anti termite chemical (Imidacloprid 30.5 SC, 10.5 ml for 5 Liters of water as per IS 16131.) with a hand operated pressure pump until refusal or to a maximum of one liter per hole. Holes shall be sealed with cement motor after treatment and providing spraying and injecting termiticides for treating and applying to doors, windows, frames, removing, crusting treating in Treatment along outside of foundations (i.e.,Soil in contact with external walls around the building and Concrete or Masonry apron around the building), Treatment of soil under floors - Inside Building, Treatment to voids in masonry, Treatment at points of contact of woodwork, Treatment of Wood Work, Treatment of Electrical Fixtures, as directed in IS 6313 Part 3 2013 with preventive chemicals duly taking precautions for health hazards and safety measures for the occupants including all costs, conveyances of all materials and labour charges,overheads and contractors profit etc complete for finished item of work to the satisfaction of the Engineer-in-Charge. The plinth area of the building each floor shall be taken for the purpose of payment.
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING
Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed Granite metal from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for mixing, laying concrete in foundations , ramming, finishing top surface to the required level, curing including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No. 402) MACHINE MIXING
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed Granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm)"," from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING for Ground Floor
Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed Granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm)"," from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand) (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, centering using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc all charges for mixing, laying concrete in position, curing & lift charges and cost of overheads & contractors profit etc., complete for Bed Blocks for finished item of work. (APSS No. 402): HAND MIXING for First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Footings
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Pedestal
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Grade Slab - 150mm thk
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Plinth Beams
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. For Steps (For Steps Ground floor And First Floor )
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for Columns - un-supported height of 6.71m Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for Columns - un-supported height of 3.66m Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for Columns - un-supported height of 3.66m First Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for Columns - un-supported height of 3.66m Terrace Floor/ Second Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for RCC walls -230mm thk - un-supported height of 3.66m Terrace Floor/ Second Floor
upply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. for Beams - un-supported height of 6.71m Ground Floor
upply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. for Slab 150mm thk - un-supported height of 6.71m Ground Floor
upply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. for Beams - un-supported height of 3.66m Ground Floor
upply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. for Beams - un-supported height of 3.66m First Floor
upply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. for Beams - un-supported height of 3.66m Terrace /Second Floor
upply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. for Slab 150mm thk - un-supported height of 3.66m Ground Floor
upply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. for Slab 150mm thk - un-supported height of 3.66m First Floor
upply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS. for Slab 150mm thk - un-supported height of 3.66m Terrace /Second Floor
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for Lintels - un-supported height of 3.66m Ground Floor
Supply and placing of Design Mix Concrete M 20 grade corresponding to IS 456 with minimum cement content of 350 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for Lintels - un-supported height of 3.66m First Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) for Ground Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) for First Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126) for Terrace /Second Floor
CR stone masonry in 2nd sort in CM (1:6) prop: (cement : sand) using Granite stones from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand) water, granite stones, etc., from approved quarry to site and including labour for cutting stones to required size and shape, mixing of cement, mortar, construction, scaffolding charges, curing etc., and overheads & contractors profit, complete for finished item of work in foundation & basement. (APSS No. 615 & 601)
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) for Ground Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) for First Floor
Solid Fly-ash Block masonry 225 mm thick for panel walls in super structure, parapet walls with cement mortar (1:6) prop (Cement:sand) using solid fly-ash blocks of size 290 x 225 x 140 mm from approved source having minimum crushing strength of 5 N/sq.mm. including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding seigniorage on all materials but including all incidental and operational, labour charges like mixing cement mortar, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds, constructing masonry, lift charges, curing overheads & contractors profit etc., complete for finished item of work as per SS 504. for:-Fly Ash Block Masonry in CM 1:6 (290x225x140) for Terrace /Second Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) for Ground Floor
Reinforced Solid Fly-ash Block Masonry for partition walls (100 mm thick) for panel walls in super structure, parapet walls with cement mortar (1:4) prop (Cement:sand) using solid fly-ash blocks of size 290 x 100 x 140 mm for manufacturing of flyash solid blocks from approved source having minimum crushing strength of 5 N/sq.mm. and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls wherever applicable including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), bricks, water etc., to site, excluding cost of seigniorage charges on all materials, but including cost of scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds) and all operational, incidental , labour charges like mixing cement mortar, lift charges, curing, overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 509 & 501) for First Floor
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. for Ground Floor
Ornamental Brick Work with 2nd class bricks in CM(1:5) (using brick bats and Madrass terrace Bricks) including cost and conveyance of all materials, labour, scaffolding charges (with MS Jack Prop Cup lock Pipe Scaffolds), curing, lift charges etc.,complete but excluding seigniorage charges and taxes like GST etc. for First Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Ground Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for First Floor
Ornamental ceiling plastering 12mm thick using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8 mm thick in CM(1:5) and top coat of 4mm thick in CM(1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904) for Terrace /Second Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for Ground Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for First Floor
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for Terrace /Second Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc. for Ground Floor
Ornamental Plastering Special class 1" to 1 1/4' thick with base palstering 1/2" to 3/4" in CM(1:3) and top finishing 1/2" thick with CM(1:2) to bring the required ornamentation, fine rendering with neat cement including cost and conveyance of all matrials, labour charges, all incidental and operational charges, curing etc., complete, to the required shape and size as per the approved drawing and as per Silpi Norms including preparation and fixing of precast pillars, kudam, palaks, Vedika, Lathalu in Uthara eluthakam, PothikasNasigudu, Pupha puskala Adhistanam. But excluding seigniorage charges and taxes like GST etc. for First Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). for Ground Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). for First Floor
Providing pancha colour paint two coats over primary coat to Vigrahams or temples with best synthetic enamel paint (Apco light, Asian / Brazer make) as per approved matching colour including cost and conveyance of all materials, labour charges, brushes etc., complete (as per Silpi Standards). But excluding seigniorage charges and taxes like GST etc. for Vigrahams or temples
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) for Ground Floor
Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site (excluding cost of C.C. bed), base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work. (APSS No.701 & 707) for First Floor
Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. for Ground Floor
Skirting with Double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs for internal wall to 10 cm height with length equal to flooring stones and matching the flooring joint lines and set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of tiles to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, white cement etc., to site, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge including cost of overheads & contractors profit etc., complete for finished item of work.(APSS No.701 &707) The skirting should flush online with plastering. for First Floor
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) for Ground Floor
Flooring with Non-skid red or white full body Ceramic floor tiles of size 300 x 300 mm and thickness between 7-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM (1:8) prop. 12mm thick including neat cement slurry of honey like consistancy spread at the rate of 3.3kg per sqm and filling the joints with white cement mixed with pigment of matching shade to match the shade of tiles over a bed of C.C. or R.C.C. slab, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, ceramic tiles, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer-in-charge curing etc., complete and cost of overheads and contractor profit for finished item of work. (APSS No.707 & 701) for First Floor
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge.for Ground Floor
Dadooing to walls with digital / polished glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of C.M (1:5) proportion, 12mm thick and neat grey cement slurry of honey like consistency, spread at the rate of 3.3kgs per sqm and jointed with white cement or coloured cement to match the shade of the tiles, including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, tiles, coloured cement, overheads & contractors profit etc., to site, cost of all labour charges for mixing of cement mortar, laying glazed tiles to level, curing etc., complete for finished item of work as directed by Engineer-in-charge. for First Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) for Ground Floor
Flooring with High Polished Granite 16 to 18 mm thick up to 8'-00 (2.43 M) of regular colours (other than black) set over a base coat of CM (1:8) prop. 20mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water, granite, white cement etc., to site (excluding cost of C.C. bed), cost of base coat and all labour charges for mixing of cement mortar, laying granite to required slope as directed by the Engineer- in-charge, cost of overheads & contractors profit etc., complete for finished item of work . (APSS No.701 & 707) for First Floor
Providing cladding with 16 to 18 mm thick High Polished Granite up to 8'-00 (2.43 M) of regular colours (other than black) in single piece set over a base coat of CM (1:3) 20 mm thick with grey cement slurry of honey like consistency spread at the rate of 3.3 kgs of cement per sqm and jointed neately with white cement paste mixed with pigment of matching shade to match the shade of granite to full depth including cost and conveyance of all materials like cement sand (with 50% river sand & 50% manufactured sand), water flooring stones etc. to site, cost of base coat and all operational and labour charges such as mixing mortar, dressing, fixing in position, lift charges, cost of overheads & contractors profit etc. complete for finished item of work. (APSS No.701 & 707) for Ground Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special) for Ground Floor
Providing 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, half rounding the edges of treads , polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for treads (S.S.701 & special) for First Floor
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special) for Ground Floor
Providing risers with 16 to 18mm thick high polished granite stone slabs of regular colours (other than black) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:5) , 12mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand (with 50% river sand & 50% manufactured sand) , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and cost of base coat and overheads & contractors profit, complete for finished item of work for Risers (S.S.701 & special) for First Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for internal walls - :-Internal Colouring - Providing Putty.
Painting to new walls with 2 coats of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Interior Grade- 1 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for Internal walls - Plastic emulsion paint - 2 Coats + 1 coat primer.
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty for Ground Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty for First Floor
Providing and applying synthetic plaster putty or equivalent putty of white cement or polymer or cement based such as birla wall care putty or equivalent of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads and contractors profit for finished item of work for external walls - including cost of access scaffolding(with MS Jack Prop Cup lock Pipe Scaffolds) for:-External Putty for Terrace /Second Floor
Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ litre of approved brand and shade over a base coat of approved water based Cement Primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete and cost of overheads & contractors profit for finished item of work as per SS 912 for external walls for:-External Colouring - Plastic emulsion paint - 3 Coats.
Supplying and fixing 14 mm - Mineral Fibre Sheet Grid Line False Ceiling of Tegular Edge 600 x 600 of Board / Tegular/ Micro look Edge tiles with a Humidity Resistance of 90% RH, Average NRC 0.50, Light Reflectance >80%, Thermal Conductivity λ = 0.052 to 0.057 w/mk, Fire Performance Class 0/Class 1; fixing to Gyp steel precoated GI wall angle of size 25 mm x 25 mm x of 0.70 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using precoated GI Tee section (24 mm x 38 mm x 0.7 mm) from soffit at 1220 mm c/c fixed with GI Soffit Cleat, rawl plugs and steel expansion fasteners & connecting clip to the GI T section with 4 mm dia GI Rod with galvanised spring steel level clip of PVC unversal holding clips system at 1200 mm c/c and fixing the 14mm Mineral Fibre Sheet of size 600 x 600 mm in position and finishing two coats of drywall topcoat including overheads & contractors profit, etc. complete for finished item of work.
Supplying and fixing Gyp Board Suspended regular single layer false ceiling (GS-MFSC-4.1 as per India Gypsum) using 12.5 mm thick Gyp Board conforming to IS 2095 - 1982 fixing to Gyp steel GI perimeter channels of size 20 mm x 27 mm x 30 mm(web) of 0.55 mm thick along the perimeter of ceiling screw fixed to brick work/ partition at 610 mm c/c and suspending the frame work using Intermediate channels (45 mm x 15mm x 15mm x 0.9 mm) from soffit at 1220 mm c/c with ceiling angle (25 mm x 10 mm x 0.55 mm) fixed with GI Cleat and steel expansion fasteners & connecting clip to the ceiling channels (with knurled web of 51.5 mm x 26 mm x 10.5 mm x 0.55 mm) fixed in direction perpendicular to the intermediate channel at 457 mm c/c and fixing the 12.5 mm tapered edge Gypboard with 25 mm drywall screws at 230 mm c/c & jointing and finishing using joint compound and paper tape to have a flush look including filling the tapered & square edges with jointing compound, two coats of drywall topcoat, overheads and contractors profit, etc. complete for finished item of work as per Idia Gypsum Ltd specification.
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.91 X 2.13m) Construction of Accommodation for Archaka Quarters 2BHK (G+1)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.22 X 2.13m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.07 X 2.13m) for Construction of Accommodation for Archaka Quarters 3BHK (G+1)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.91 X 2.13m)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 0.83 X 2.13m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.22 X 2.13m) for Construction of Commercial shops and Dormitories (G+1)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 150*100 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 8 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 8 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 2.59 X 2.44m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 150*100 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.83 X 2.13m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. 35 mm thick Medium Teak wood door fully panelled shutters as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.52 X 2.13m)
Supplying and fixing DOUBLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 6 no.s Butt hinges (IS:12817)- 150 mm Long, 4 no.s Door Handles 150 mm Long, 2 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long, 2 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.52 X 2.13m)
Supplying and fixing SINGLE SHUTTER DOOR using Medium Teak wood Door Frame section of 100*75 MM is fixed to wall using Z Hand fast 300 MM long hold fast. Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 as per drawing including cost of Stainless Steel fixtures such as Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long 1 no. Heavy duty Aluminium Door stopper & 6 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Door size 1.07 X 2.13m)
Providing and fixing factory-made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast and 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58- 60 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -in- Charge and Stainless Fixtures are 3 no.s Butt hinges (IS:12817)- 150 mm Long, 2 no.s Door Handles 150 mm Long, 1 no. Tower Bolt-10 mm Bolt (IS:15833) 200 mm Long, 1 no. Aldrops (IS:15834) 300 mm long, 1 no. Aluminium Flat Latches: 300 mm long & 4 no.s MS Z Hold fasts - 300 mm long of 40 x 40 x 5 mm ISA including fixing the fixtures to door with required no. of screws, bolts and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work. (Single Shutter Door size 0.76 X 2.13m)
Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., including overheads & contractors profit complete for finished item of work for:-Polishing to wood work - Melamine Polishing to Wood Work.
Painting to flush shutters two coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit over wood primer coat including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper for neat finish etc., complete and including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter – (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. for Ground Floor:
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track–2 Panel Sliding Doors duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of 60 mm x 45 mm x 2.20 mm with reinforcement of 1.2 mm thickness, super sash with overall size of 39 mm x 75 mm x 2.20 mm with for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of bent handle espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. for Construction of Accommodation for Archaka Quarters 3BHK (G+1)
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) casement windows openable shutters duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for outer frames, 82 mm x 60 mm x 2.60 mm for Fix mullion (“T” or “Z” )made of 60mm x 82mm uPVC profile section with steel reinforcement of size 35mm x 28mm x 1.5mm shall be provided in windows having fixed panel as per the requirement. The shutter of outward open able window shall be made of size 60mm x 77mm or for inward open able window shall be made of size 60mm x 78mm; “T” shaped for outward open or “Z” shaped for Inward open extruded 3 box multi-chamber uPVC window profile section of white colour having outer wall thickness of 2.6mm (± 0.2mm) provided with reinforcement of minimum 1.5mm thick G/J/U/S/O type GI section prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC and accessories for casement window – friction hinges of stainless steel grade 304- 2 Nos., per sash, handle 1 No. per sash, multipoint locking system suitably concealed 1 No., per sash provided with raiser wedges for smooth operation and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) Fixed Glazing/ Window duly manufactured using UPVC reinforced profiles of 60 mm x 60 mm x 2.60 mm for frames and the mullion sections are of 60 mm x 82 mm x 2.60 mm frames are structurally reinforced with hot dip galvanized up to 50 microns of size 35 mm x 28 mm of thickness 1.5 mm the sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with EPDM weathering seal resistant and glazing bead 34.5 mm x 18 mm including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site with templates for casement sizing complete for finished item of work.
Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
Supply & fixing of Rolling shutter made of 80 x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special Spec: 1108, including cost and conveyance of all materials, all operational, incidental labour charges, overheads and contractor's profit complete for finished item of work.
Supplying and fixing ornamental MS Grills including fabrication and erection in position using alround frame of 25mm X 6mm MS flat welded with 10mm X 10mm square bar rods placed at 4" and 2" c/c (alternate spacing) fixed in both horizontal and vertical directions including cost and conveyance of all materials to work site, all operational, incidental labour charges, power charges, overheads & contractors profit etc., complete for finished item of work.
Painting to new iron works with 2 coats of Synthetic Enamel paints in all shades using ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. over 1 coat of Red Oxide Primer Paint for iron works of Grade -1 of approved brand to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site including cost of primer coat and all operational, incidental, labour charges etc. complete etc., complete including cost of overheads & contractors profit (APSS No.1200, 1207 & 1211) in all floors.
Providing & fixing on roof pressed clay tile (Mangalore tile) of size - 8 x 6 inches and as per approved pattern on roof jointed with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement including cost and conveyance of all materials like roof tiles, cement, sand(with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges & curing etc., and overheads & contractors profit complete for finished item of work. for Ground Floor:
Providing & fixing on roof pressed clay tile (Mangalore tile) of size - 8 x 6 inches and as per approved pattern on roof jointed with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement including cost and conveyance of all materials like roof tiles, cement, sand(with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges & curing etc., and overheads & contractors profit complete for finished item of work for First Floor :
Part - E: Site Development & Infrastructure works
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness by Mechanical means as per the Techinical Specification Clause 201 MoRTH 5th Revision (IN AREA OF LIGHT JUNGLE) for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Earthwork excavation in soils upto SDR by mechanical means including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete including for finished item of work for trench cutting as per MoRT&H specification 301(5th Revision) and as directed by the Engineer-in-Charge for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Earthwork excavation in soils upto SDR by mechanical means for foundations of structures as per drawing and technical specification including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing sides of bottom, back filling the excavation earth to the extent required etc., complete including seignioarge charges for finished item of work as per MoRT&H specification 304(5th revision) and as directed by the Engineer-in-Charge . for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks & Storm water Drain & Electrical Trenches
Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.for Upto 3 M depth Construction of Retaining wall height of 8'0"
Earth work excavation for (Sumps, Tanks and Open Excavation) and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means for Upto 3 M depth Under Ground Sump - 1 Lakh Litres Capacity For Drinking, Utility & Fire Fighting - 3 no.s
Filling with useful available excavated earth (excluding rock) by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cms thick consolidating each deposit layer with watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P and cost of overheads & contractors profit etc., complete for finished item of work for (APSS NO.309&310) for Construction of Retaining wall height of 8'0" & Under Ground Sump - 1 Lakh Litres Capacity For Drinking, Utility & Fire Fighting - 3 no.s
Filling with carted gravel by mechanical means in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for fnished item of work(APSS NO.309&310). for Construction of Retaining wall height of 8'0"
Construction of embankment with material obtained from borrowed useful earth from outside road boundary CBR ≥ 12%, by mechanical means upto SDR with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil on the embankment, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P , complete for finished item of work as per MoRT&H specification 305 (5th revision). for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Construction of Sub grade with approved material of gravelly soils with CBR ≥12%, PI <12% & MDD >18 KN/cum obtained from borrow pits with all lifts and leads transporting to site, spreading, grading to required slope and compacted , removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soil , spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and seigniorage charges, complete for finished item of work as per MoRT&H specification 305 (5th Revision) for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Construction of Granular sub-base by providing HBG/HBT material confirming to Grading - VI of MoRT&H Table 400-1 including cost, (excluding seigniorage charges) and conveyance of all materials to work site and spreading in uniform layers with motor grader or by approved means, on prepared surface mixing by mix in place method with Rotavator / approved means at OMC and compacting with vibratory roller to achieve the desired density etc., complete for finished item of work as per MoRT&H Specification 401 (5th revision) and as directed by the Engineer-in-charge. (Payment Based on Levels) for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) MACHINE MIXING for Construction of Retaining wall height of 8'0" & Under Ground Sump - 1 Lakh Litres Capacity For Drinking, Utility & Fire Fighting - 3 no.s
Providing Vibrated Cement Concrete (1:3:6) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement. for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Construction of Cement concrete Road with VCC M 40 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2100 & 2702 (5th Revision) and as directed by the Engineer-in-Charge for C.C Pavement. for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Providing Vibrated Cement Concrete (1:4:8) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, seigniorage conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement. for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks & Storm water Drain & Electrical Trenches
Vibrated cement concrete M20 Grade Concrete using 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) and conveyance of all materials to site and all labour charges , centering, machine mixing, laying in position, Compacting, Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification1500,1700, 2200 (5th Revision) for foundation and Side walls for Storm water Drain & Electrical Trenches
Vibrated reinforced cement concrete M 25 grade using 20mm & 10mm HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2) including cost, (excluding seigniorage) conveyance of all materials to site and labour charges, centering, machine mixing, laying, vibrating, curing etc., including other incidental hire and operational charges of all T&P as per approved drawings and as directed during execution but excluding cost of steel and its fabrication charges for finished item as per SBD specification as directed by the Engineer-in-Charge for Cover Slab for Storm water Drain & Electrical Trenches
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Footings, Pedestals , Plinth Beams & Steps. for Footings Construction of Retaining wall height of 8'0"
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for RCC Walls -300mm thk - un supported height of 3.66m Ground Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, including centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR COLUMNS, LINTELS, WATER TANKS, RCC WALLS in BUILDINGS. for RCC Walls - 230mm thk Basement Floor
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Bottom slab, Haunch Concrte. for Bottom Slab
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and using 20mm graded machine crushed Granite metal (coarse aggregate) from approved quarry including adding superplasticiser of high range water reducing admixture conforming to IS 9103-1999 including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand and 50% manufactured sand), coarse aggregate, water, superplasticiser etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) for following items of work for Bottom slab, Haunch Concrte. for Haunch Concrete
Supply and placing of Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using Batching Plant of capacity 50 cum per hour and transporting concrete to site by Transit mixer of 2cum capacity and pumping concrete; using pump and with 20mm size graded machine crushed Granite metal (coarse aggregate)(consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) (with 50% river sand & 50% manufactured sand) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) FOR BEAMS AND SLABS.for Top Slab 175mm thk Ground Floor
Supplying, fitting and placing thermo Mechanically Treated (TMT) (Fe 500/500D/550D grade as per IS 1786-1979 manufactured by Primary producers like( Steel Manufactures Within Telangana with minimum integrated installed Production Capacity of 10 Lakh MT per annum (TATA, SAIL, VSP, Jindal Panther) as approved by Ministry of steel guidelines) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars to site, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying on all materials etc. ,and cost of overheads & contractors profit etc., complete for finished item of work ( APSS No.126)
Plastering 12mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, all operational, incidental charges on materials, cost of all labour charges for mixing mortar, finishing, scaffolding (with MS Jack Prop Cup lock Pipe Scaffolds) , lift charges, curing, cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. (SS 901,903 & 904) for Ground Floor
Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), water proofing compound, water etc., to site, all operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903). for Ground Floor
Supply, Laying and Fixing of precast concrete blocks for paving of M-40 grade and thickness not less than 80 mm for Medium traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over a base coat of 50mm thk sand bed including cost and conveyance of all materials like sand, water tiles etc.,to site, labour charges for loading & unloading, laying to desired lines and levels complete and Overheads & Contractor Profit etc. for finished item of work. - for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Supply, Laying and Fixing of precast concrete blocks for paving of M-35 grade and thickness not less than 60 mm for Light traffic areas conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification set over a base coat of 50mm thk sand bed including cost and conveyance of all materials like sand, water tiles etc.,to site, labour charges for loading & unloading, laying to desired lines and levels complete and Overheads & Contractor Profit etc. for finished item of work. for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 440 mm high as shown in drawing in M 20 grade PCC, kerb stone laid with kerb laying machine, all complete as per clause 408 for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Painting 2 coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface as per Tech Specification 800 MORTH (5th revision) and as directed by the Engineer in charge. for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Groove Cutting of 2-4 mm for 1/3rd depth of concrete slab using concrete groove cutting machine with diamond studded saw within 24 hours of casting of CC Pavement - 100mm to 200mm thick. for Roads with C.C- 25ft & 40ft wide & Parking Area & Pathways with Paver Blocks
Manufacture, supply, delivery and fixing of encapsulated plastic steps as per company’s standard specification including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes and others etc., as applicable, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work. for Under Ground Sump - 1 Lakh Litres Capacity For Drinking, Utility & Fire Fighting - 3 no.s
Designing, providing, constructing, hydraulic testing, commissioning and giving satisfactorily trial run for 3 months of 50 KLD capacity STP with Moving Bed Bio Reactor (MBBR) Technology consisting of Inlet Chamber, Screen Chamber, Grit Chamber and MBBR (Based on technologies providing attached growth on plastic media kept suspended in the sewage due to low density of plastic & provided with diffused air for aeration with tank), Secondary Clarifier, Sludge collection sump, Gravity Sludge Thickener, Chlorine Contact Tank/ UV Disinfection, Chlorinator Room/ UV Channel, Sludge Dewatering Equipment, Tertiary Treatment involving Coagulant Dosing System/ Flash Mixer + Flocculation + Settling Tank/ Clariflocculator, Pressure Sand Filters, all necessary piping work with required valves, gates, drains, pathways, Administration Block cum Laboratory, Laboratory Equipments, inclusive of mandatory spare parts and instrumentation, Internal Roads, Pathways, compound wall, Tools and Plants, complete as turnkey job with all involved civil, electrical, instrumentation and mechanical works inclusive of following items, units as per detailed specifications for civil, electrical and mechanical components etc., complete to achieve the norms prescribed by the Hon'ble NGT / CPCB/ TGPCB (pH-5.5 to 9.0, BOD < 10ppm, COD<50 ppm, TSS<20ppm, Total Nitrogen < 10, Total Phosphorous < 1.0, Faecal Coliform (Most Probable Number) < 100) to get recyclable quality of water for industrial/agricultural purposes/ discharge into water bodies as well as land disposal/ applications. The Coagulant Dosing System shall be provided mandatorily for chemical phosphorous removal. All units shall be interconnected with administration building by suitable RCC overhead walkways. Min. freeboard of 300mm shall be maintained unless otherwise asked for 600mm stipulated for specific units. All arrangements shall be as per approved drawings and as directed by the Engineer in Charge. (Note: STP Units & Detailed Specification are Included as follow as per SOR Specification in PH -item no. 47)
Part - F: Internal & External Services
Supplying & Fixing Orissa Pan White glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap : 580 mm x 440 mm duly providing constructing Brick masonry seat using 2nd class bricks, CC Squatting plate in P.C.C 1:2:4, S&F PVC Low level system with internal components & short bend: 10 Litres capacity Single Flush, S&F of 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and S&F 15 mm nominal size PVC connection with brass union nut C.P coated including cost and conveyance of all materials , operational, incidental, labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.
Supplying and fixing approved make wash down European Water Closet of 1st quality conforming to IS:2556-Part-2- 2004 of white glazed with 'S' trap with CI short Connector & 4" dia CP thimble pipe: 150 mm long, best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996, PVC low level system with internal components & short bend: 10 Litres capacity Single Flush, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 and 15 mm nominal size PVC connection with brass union nut C.P coated all of approved make, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc.,. complete as per standard practice for finished item of work.
S&F of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm, fitted with 15 mm brass body CP finish self closing tap push type conforming to IS 1711 and 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.
Supplying & Fixing Indian make WHITE Flat Back Wash Hand Basin of size 550 x 400 mm with Single C.P. Pillar cock 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15 mm nominal size PVC connection with brass union nut C.P coated, 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality and standard CI brackets including wooden block, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work in all respects.
S&F of 15 mm premium variety Chromium plated finish brass body wall mixer with hand shower with a provision for over head shower with 115 mm long bend pipe on upper side, connecting legs & wall flanges conforming to IS 8931 with 10 years warranty, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
Supplying & fixing stainless steel sink size 36" x 18" (914.4x457.2mm) 1 mm thick with accessories, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overhead & contractor's profit etc., complete for finished item of work in all floors as directed by Engineer-in-charge.
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) for 75mm dia Pipe
Supplying and fixing of SWR PVC pipes of 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps with required number of Bombay nails etc., with solvent jointing as per standard practice including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc., complete for finished item of work at all floor levels . (APSS No. 1302 1319 & 1326) for 110mm dia Pipe
Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks, including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit etc. complete for finished item of work.
Supplying & fixing of 4" (101.6 mm ) multi floor trap with Jali- UPVC/SWR Pipe fittings, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc. complete for finished item of work.
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge for 22.20mm OD Pipe - SDR 13.5
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge for 28.60mm OD Pipe - SDR 13.5
S&F premium make CPVC Pipes including the cost of pipe & its fittings & labour charges complete including cost and conveyance of all materials to site, all operational,incidental , labour charges, cost of overheads & contractor profit etc.complete for finished item of work as directed by Engineer-in-charge for 34.90mm OD Pipe - SDR 13.5
Supplying & Fixing of 50 mm Nominal Bore GI pipes Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings &labour charges complete including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work as directed by Engineer-in-charge.for 50 mm Nominal Bore GI pipe
Supplying & Fixing of 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent.
Supplying & Fixing Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 50 mm NB Size including cost and conveyance of all materials and labour charges, overheads and contractor's profit etc.,. complete for finished item of work.
S&F of 15 mm brass body CP finish long body bib tap of not less than 400 grams weight with quarter turn spindle internal / external threaded connection conforming to IS 8931, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.
S&F of Chromium plated finish stainless steel body towel rail 24'' with 10 years warranty including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractor's profit, etc. complete for finished item of work.
Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 3' 0" x 2' 0" for urinals including full rounding the edges , fixing in position, polishing, including cost and conveyance of all materials to site, all operational, incidental, labour charges, overheads & contractors profit etc. complete for finished item of work for all floors.
Supply and fixing CP finish brass soap dish of approved make with screws, including cost and conveyance of all materials to site, all operational,incidental , labour charges and overhead & contractor's profit etc. complete for finished item of work as directed by Engineer-in-charge.
Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm best quality glass mirror with approved make 1st quality including cost and conveyance of all materials to site, all operational,incidental , labour charges etc. overhead & contractor's profit etc. complete for finished item of work in all floors as directed by Engineer-in-charge.
Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & constructing Brick masonry in CM 1:6 prop. over a C.C. (1:5:10) prop. Bed 100mm thick and plastering 12mm thick in CM (1:4) prop. both inside and outside surfaces and fitted with 304.8 mm x 288.6mm (12" x 9") C.I. frame and hinged cover of standard make as directed by the Engineer-in-charge including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc. complete for finished item of work. (APSS No 1326)
Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials to site, all operational,incidental , labour charges, overheads and contractors profit, etc. complete for finished item of work.
Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 1524mm (5'.0") depth and refilling, watering and tamping, including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc complete for finished item of work for 152.4 mm (6") dia
Supplying and laying, jointing and testing SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with air tight cement joints in cm (1½:1) prop, including excavation of trenches and socket pits in any soils (except rock requiring blasting) up to 1524mm (5'.0") depth and refilling, watering and tamping, including cost and conveyance of all materials to site, all operational,incidental, labour charges, overheads and contractors profit, etc complete for finished item of work for 203.2 mm (8") dia
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.for NP-2 Class 150mm dia pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.for NP-2 Class 200mm dia pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.for NP-2 Class 250mm dia pipe
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes Pipe with Spigot & Pin Type with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete, including all incidental, labour charges, overheads and contractor's profit, etc. complete for finished item of work.for NP-2 Class 300mm dia pipe
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 3'-0" Depth
Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, overheads and contractors profit, etc., complete for finished item of work as per Standard specification. 5'-0" Depth
Internal Electrical Installations
Electro Mechanical Services for Main temple sub temples
Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required Metallic Deep Boxes including masonary work and labour charges etc., complete. Makes : Sudhakar / VIP / Precision
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metal Modular deep box including all labour charges etc., complete. Makes : Sudhakar / VIP / Precision
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains. Makes : Sudhakar / VIP / Precision
Wiring with run of 2 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe, ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose/batten holder of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B. Wire Makes: Finolex / RR kabel / Havells Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Wiring with run of 2 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing PVC conduit pipe,Ferrules including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 2way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for Stair case points in N.R.B .Wire Makes: Finolex / RR kabel / Havells Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Wiring with run of 3 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe,ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B. Wire Makes: Finolex / RR kabel / Havells Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Supply and fixing of ISI Marked 6A/ 10A 3 Pin 2 Module Modular Socket with shutter with 6A/10A 1way Modular switch on a common switch board Module box with cover frame with connections including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B. Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Wiring with run of 3 of Supply of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing conseled PVC pipe,frrules including Supply and fixing of ISI Marked 6A/ 10A- 3/2 pin Modular socket with shutter, 6A/10A 1way Modular switch with required cover frame including connections, cost and conveyance of all material and all labour charges etc., complete for seperate plug points in N.R.B. / R.B.Wire Makes: Finolex / RR kabel / Havells Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Supply and fixing of ISI marked 16A/6A 1 way Combi Socket Modular Socket with shutter, 16A / 20A 1 Way 1 Module Modular Switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B.Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Supply and fixing of ISI marked 3 Nos 10A Modular type switches, 3Nos 10A 3 Pin 2 Module Modular Socket with shutter on 9 Modular box with cover frame including connections, cost and coveyance of all material and all labour charges etc., complete for Computers in N.R.B. / R.B.Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Supply and Run of 3 of 2.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. in existing pipe for run of mains inlcuding connections and all labour charges etc., complete.Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 3 of 4.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete.Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 5 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 5 of 10.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.Wire Makes: Finolex / RR kabel / Havells
Supply, transportation and fixing of 12 W +/-10% (>= 1200 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.
Supply, transportation and fixing of Linear light KL-23225 Slim-R Housing Dimentions 1000×25.7×7 Product finish: Anodized Alluminium . Note: Luminaire to be ordered with suitable light source, power supply Make:K-Lite or its equivalant make approved by the Department
Supply, transportation and fixing of Track light KL-63206 Track Light accossories 2 meter 2 wire Track Dimentions:2000 and Product finish:white Make:K-Lite or its equivalant make approved by the Department
Supply ,transportation and fixing of 22W +/ 10% , >/- 2300 lumens, 1200 mm (+/- 10%) length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification with BIS Certification.LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.
Supply and transportation and fixing of 40 W +/-10% (>=4000 Lumens) LED well glass fitting madeup of pressure die cast alluminium, integrated heat sink, dedicated mounting bracket, with all accessories etc complete with 5 years warranty LUMINAIRE MAKE : PHILIPS / OSRAM / GE / CROMPTON / BAJAJ / HAVELLS LED MAKE : Philips Lumileds / Cree / Nichia / Osram / Samsung / LG LEDs.
Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.6, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete.Makes : Atomberg (Efficio ) / Havells / Orient
Supply and fixing of 2 Module Modular type Electronic step type Fan Regulator with connections and Labour charges etc complete.Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Supply Transportation and fixing of 8" (200 mm) , BLDC exhaust fan with necessary accessories etc., complete Makes : Atomberg / Crompton /Havells / Orient / Goldmedal / GM.
Supply, Transportation and Fixing of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark with all labour charges etc., complete as directed at site.Makes : Crompton / Almonard / Havells Turbo Force SP.
Supply and fixing of GI louver shutter including GI mesh to avoid birds entry with necessary materials suitable for Exhaust fan.
Supply and fixing 6 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 63A FP Isolator and 18No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes :Legrand Isolator Makes : Legrand-DX3 / Schneider-Acti9 MCB Makes : Legrand-DX3 / Schneider-Acti9
Supply and fixing of 8 way VTPN DB IP 43 Protection as per IS:13032 With and suitable for 1 No 125A 4 pole MCCB Incomer and 4 Nos 63A 10 kA ISI Marked C/D curveTP MCBs and 4 Nos 40A 10 kA ISI Marked C/D curveTP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter Connections and labour charges for Flush Mounting etc., complete. including alll connections and labour charges for Flush Mounting etc., complete.DB Makes :Legrand MCCB Make: Legrand -DP X3 MCB Makes : Legrand-DX3
"Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curveSP MCB including internal connection and labour charges for Flush Mounting etc., complete.DB Makes :Legrand MCB Makes : Legrand-DX3 / Schneider-Acti9
Air Conditioning
Supply, Transportation and installation of 2.0 / 1.8 TR 3 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R410 INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping,insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with warranty of compressor for 5 years iand comprehensive maintenance for 2 yearsMakes : Daikin / Blue Star / Toshibha / Carrier / Hitachi / LG / Samsung / Lloyd or equivalent
Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air-Conditioner including foaming etc., complete. 1.7/1. 3/4" x 3/8" 2. 5/8" x 1/4" 3. 1/2" x 1/4" or equivalent sizes8" x 1/2"
"Supply, installation, testing and commissioning of the drain pipe with 32 MM CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department"
CCTV SECURITYSYSTEM
Supply and fixing of 4MP Dual Light Vandal Dome Camera - 50Mtr 1/2.7" 4MP PS CMOS Image Sensor (0.9407Centimeters) Max. 4MP (2688 × 1520)@1–20 fps/(2560×1440)1-25/30fps Instastream, H.265, H.264,H.264H, H.264B, MJPEG Support Quad StreamWDR(120dB), Day/Night(ICR), 3D NR, ROI, AWB,AGC, BLC, HLC, Digital watermarking Support Built-in Mic IR Range of 50 Mtr, Warm Light Range of 30 Mtr 3.6mm fixed Lens Support Starlight Technology Micro SD Card, PoE, IP67, IK10. Model : CP-UNC-VC41L5C-VMD-LQ Make : CP PLUS
Supply and fixing of 4MP Dual Light Bullet Camera - 50Mtr 1/2.7" 4MP PS CMOS Image Sensor (0.9407 Centimeters) Max. 4MP (2688 × 1520)@20 fps/ (2560 ×1440)@25/30 fps Instastream, H.265, H.264,H.264H, H.264B, MJPEG Support Quad stream WDR(120dB), Day/Night(ICR), 3D NR, ROI, AWB,AGC, BLC, HLC, Digital watermarking IR Range of 50 Mtr., Warm Light Range of 30 Mtr 3.6mm Lens (6mm and 8mm optional) Support Starlight Technology Micro SD Card, PoE, IP67, IK10(optional). Model : CP-UNC-TC41L5C-VMD-LQ Make : CP PLUS
Supply and fixing of 32 Ch. H.265+ 4K Network Video Recorder Up to 32 channel IP camera input Max 320Mbps incoming bandwidth Smart H.265+/H.265/Smart H.264+/H.264/MJPEG Up to 12MP resolution preview and playback Support 2 SATA HDDs up to 10TB Each, 3 USB Ports (2 USB 3.0, 1 USB 2.0) 2 HDMI / 2 VGA simultaneous video output Support Multi-brand network cameras ONVIF Version 2.4 conformance Make: CP Plus
Supply and installation of Surveillance 6 TB Hard Disk Make : WD/ Seagate
Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply, Installation, Testing and Commissioning of16 Port, 2 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
"Supply & Fixing of 55 inch LED monitor 4K smart commercial display unit with VGA HDMI, USB ports. Panel Type LCD, Aspect Ration 16:9, Resolution 3480 x 2160, Brightness 350 nits, Contrast ratio 4000:1, Response time 8ms, icluding 3 yrs warranty Approved Make : Samsung / LG or equivalent as approved by Department "
Supply of unloaded 24 port patch panel with IO separate including all labour charges etc complete Makes : Digisol / TP Link / D link. / Legrand
Supply, Installation, Testing and Commissioningof 24 Port 10 / 100 / 1000 Gigabit Unmanageable Ethernet switch. Makes : TP Link / D link / Netfox
Supply Installation of 3 feet length moulded patch cord including accessories and all labour charges etc complete Makes: Digisol / TP Link / D link. / Legrand
Supply and installation of IP 20, IK 08 17U floor 600mm Width x 1000mm Deep Floor mounting network rack with all accessories like front and rear doors, fans, castor wheels (2 with break and 2 without break), cable manager, cantilever shelf, horizontal and vertical wer distribution unit, monitor shelf, brush at cable entry and hardware packet, etc. Mod cap floor stand : Modular construction of the rack made of 4 vertical , 4 Horizontal and 4 depth alloy extruded multi folded hallow profiles bolted and joined together with links and corner blocks. 3 Pairs of support channels to equate the load evenly and castor provision at bottom side.Painting shade : Combination of RAL 7035 / 7037 fine texture - 60 to 80 microns. or RAL 9005 fine texture - 60 to 80 microns complies with standards : UL 2416, Din 41494, IEC EN 60529, IEC EN 62262, IEC EN 60068-2-11, ISO 9001-2008.Netrack
Supply and installing HDMI cable low voltage grade as per standard specifications having 5 Mtr cord length with male and female 19 pin HDMI connectors as per requirement at site.
V - FIRE EXTINGUISHERS
Supply and fixing of Co2 4.5 Kg capacity type extinguisher with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683. For electrical room all taxes and all labour charges etc complete.Makes: FIREX /MINIMAX/ ARMOUR /SAFEX/ KANNEX / CEASEFIRE
Supply and fixing of ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683 (For car parking) Makes: FIREX /MINIMAX/ ARMOUR /SAFEX/ KANNEX / CEASEFIRE
External Electrical Installations
Supply and transportation and fixing of KL-24897 Pelican Fort Mini 50W LED CCT: 2700K, 3000K, 4000K, 5700K Dimension:Ø425 x 407 Mounting: D4 Product Finish: RAL 7016 Anthracite Grey, Graphite Grey, RAL 9004 Black, Optics: Type II Option: A9,A12 IP: 65 IK: 05 Make:K-Lite or its equivalant make approved by the Department
Supply and transportation and fixing of KP-12057-PCF- 014-003-G26-563-SA L0188-4910 Montana Pelican Mini Orna Eva Lighting Pole 5.630m Height (in mm): 5630 PoleType: P22 Arms: Single PF: Graphite Grey,Anthracite Grey,BlacK Make:K-Lite or its equivalant make approved by the Department
Supply and transportation and fixing of KP-9326-9205 Foundation Bolt 4 Nos of M16 Foundation J Bolt Length 500mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each Bolt Make:K-Lite or its equivalant make approved by the Department
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX 450mmX 400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)
Supply and Run of 50mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (2.36Kgs/1Mtr)
Supply and Run of 50.mm x 6mm copper strip including cost of all accessories and labour charges etc., complete.
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr)
Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 16 Gauge CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process . The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip 40 x 6 mm, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards for Lighting panel. (Panel shall be manufacture only from CPRI approval fabricators.)
125A Alluminium Bus Bar with colour coded sleeves.(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted
Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V
OUT GOING FEEDERS
Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-5Nos
Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH
Supply of 40A 10KA TP MCB, C/D Curve ISI Mark.-4Nos
Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH
Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).
Supply and erection of 0-125A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No
MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL.
Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No
Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No
Supply and erection of LED indication lamps on the existing panel board. - 3 Nos
Supply and erection of LT current transformer with bar primary 125 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos
Control wiring for MCCBs, Metering, Control MCB, Bus bar Links, Cable Managers, Terminal Blocks, Rotary Handles and Spreader links etc., including Labour charges for errection of switch gears, panels boards including all labour charges etc with connections for finished items of works including transportation charge.
Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 10.0 Sqmm 4 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
Earth work excavation of Trench in hard ground soil up to a depth of 0.9Mtr and laying of U.G cables 70 to 400Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).
LT CABLE TERMINATIONS:
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 95Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 50Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 16Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 50Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department e.
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 16Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Cable and Accessories
Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. Makes:DEC/MNR/Aparna/HFAB orequivalent
Supply , fabrication and transportation of MS channel iron/ angle iron /flats including two coats of alluminium paint and one coat of red oxide paint including all labour charges etc complete.
Electro Mechanical Services for Infrastructure & Site Development
Supply and Laying of ISI 25mm outer dia heavy grade with IS:9537 part 3 rigid PVC pipe concealed in Roof Slabs with all required PVC / Metallic Deep Boxes including masonary work and labour charges etc., complete.Makes : Sudhakar / VIP / Precision
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with Metallic junction boxes and all required accessories including masonary work for light, fan and separate plug point with supply and fixing of suitable size Metal Modular deep box including all labour charges etc., complete.Makes : Sudhakar / VIP / Precision
Supply and laying of ISI 25mm outer dia medium grade with IS:9537 part 3 rigid PVC pipe consealed in wall with all required Metallic Junction Boxes including masonary work and labour charges etc., complete for Run of mains.Makes : Sudhakar / VIP / Precision
Wiring with run of 2 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe, ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose/batten holder of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in N.R.B. Wire Makes: Finolex / RR kabel / Havells Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Wiring with run of 2 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe, ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose/batten holder of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for light and bell points in R.B. Wire Makes: Finolex / RR kabel / Havells Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Wiring with run of 2 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing PVC conduit pipe,Ferrules including Supply and fixing of Jumbo Ceiling rose and 6A/10A ISI Mark 2way Modular switch with required modular box and cover frame in existing Surface or Concealed pipe wiring,ferrules including cost and conveyance of all material and all labour charges etc., complete for Stair case points in N.R.B .Wire Makes: Finolex / RR kabel / Havells Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Wiring with run of 3 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe,ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in N.R.B.Wire Makes: Finolex / RR kabel / Havells Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Wiring with run of 3 of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable make in existing consealed pipe,ferrules including supply and fixing of 3 Plate Jumbo Ceiling rose of Anchor / Gold Medal Olive / Million Zoom make and 6A/10A ISI marked Modular type switch including cost and conveyance of all material and all labour charges etc., complete for fan and exhaust fan points in R.B.Wire Makes: Finolex / RR kabel / Havells Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Supply and fixing of ISI Marked 6A/ 10A 3/2 Pin 2 Module Modular Socket with shutter with 6A/10A 1way Modular switch on a common switch board Module box with cover frame with connections including cost and conveyance of all materials and all labour charges etc., complete in N.R.B. / R.B.Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Wiring with run of 3 of Supply of 1.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS17048 specification for Copper cable in existing conseled PVC pipe,frrules including Supply and fixing of ISI Marked 6A/ 10A- 3/2 pin Modular socket with shutter, 6A/10A 1way Modular switch with required cover frame including connections, cost and conveyance of all material and all labour charges etc., complete for seperate plug points in N.R.B. / R.B.Wire Makes: Finolex / RR kabel / Havells Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Supply and fixing of ISI marked 16A/6A 1 way Combi Socket Modular Socket with shutter, 16A / 20A 1 Way 1 Module Modular Switch on a 3 Modular box with suitable cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. / R.B.Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Supply and fixing of ISI marked 3 Nos 10A Modular type switches, 3Nos 10A 3/2 Pin 2 Module Modular Socket with shutter on 9 Modular box with cover frame including connections, cost and coveyance of all material and all labour charges etc., complete for Computers in N.R.B. / R.B.Makes of Modular box and Switches:Legrand Lyncus/GM Four Five/Gold Medal Curve/Anchor Roma Plus/Crabtree Verona/Panasonic Vision
Supply and Run of 3 of 2.5 Sqmm Class II conductor HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable. in existing pipe for run of mains inlcuding connections and all labour charges etc., complete.Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 3 of 4.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding connections and all labour charges etc., complete.Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 5 of 6.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.Wire Makes: Finolex / RR kabel / Havells
Supply and Run of 5 of 10.0 Sqmm HFFR PVC insulated 1100V grade as per IS:694 / 2010, IS 17048 specification for Copper cable in existing pipe for run of mains inlcuding all labour charges etc., complete.Wire Makes: Finolex / RR kabel / Havells
Supply, transportation and fixing of 12 W +/-10% (>= 1200 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.
Supply ,transportation and fixing of 22W +/ 10% , >/ 2300 lumens, 1200 mm (+/- 10%) length LED light housing made with alluminium anodised body, wide operating voltage with PF≥0.9, Surge protection: > 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department as per IS, minimum CRI≥80 etc., complete with 5 years warranty with BIS Certification with BIS Certification.LUMINAIRE MAKE : Phillips / Wipro / Crompton / Havells / Jaquar / Panasonic LED MAKE : PHILIPS LUMILEDS / CREE /NICHIA / OSRAM /SAMSUNG / LG LEDs.
Supply, Transportation and Fixing of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.0, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient as approved by the Department.Makes : Atomberg (Efficio ) / Havells / Orient
Supply and fixing of 2 Module Modular type Electronic step type Fan Regulator with connections and Labour charges etc complete.Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Supply Transportation and fixing of 8" (200 mm) , BLDC exhaust fan with necessary accessories etc., complete Makes : Atomberg / Crompton /Havells / Orient / Goldmedal / GM. Makes : Crompton / Havells Ventilair-DSP / Orient hill air.
Supply, Transportation and Fixing of 12" (300mm) ISI, 900 RPM Heavy duty exhaust fan with metallic blades with Mark with all labour charges etc., complete as directed at site.Makes : Crompton / Almonard / Havells Turbo Force SP.
Supply and fixing of GI louver shutter including GI mesh to avoid birds entry with necessary materials suitable for Exhaust fan.
Supply and fixing 6 Way TPN DB Horizontal with IP 43 Protection as per IS:13032 and suitable for 1 No 4 pole Incomer of 63A FP Isolator and 18No. 6-32A 10kA ISI Marked C/D Curve SP MCBs with 100 A tinned copper busbar, neutral bar, earth bar and cable ties for cable management, fully shrouded neutral bar, profile blanking modules for unused MCB ways, din bars and detachable gland plate etc complete with inter connections and labour charges for Flush Mounting etc., complete. DB Makes :Legrand Isolator Makes : Legrand-DX3 / Schneider-Acti9 MCB Makes : Legrand-DX3 / Schneider-Acti9
"Supply and fixing of DB with 1 No 20A single phase plug and Socket, in sheet steel enclosure with 1 No 10A to 20A 10 KA ISI Marked C/D curveSP MCB including internal connection and labour charges for Flush Mounting etc., complete.DB Makes :Legrand MCB Makes : Legrand-DX3 / Schneider-Acti9
Supply, Transportation, Installation, Testing and commissioning of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000 watts 5 Star rated water heater with ABS plastic body of 15 Ltrs capacity to withstand up to 8.0 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos SS flexible braided hose pipe, testing and all labour charges etc., complete. Makes : Crompton / Jaquar / Venus / Racold / AO Smith / Goldmedal / GM /Havells / Bajaj or equivalent as approved by the Dept.
Supply and Run of LAN Cable cat - 6 UTP cable of makes D Link / AMP / Molex / Legrand / Krone / Finolex / Polycab in existing pipe inlcuding all labour charges etc., complete as desired by the department (derived from Sd 3.1.2) Makes : D Link / AMP / Molex / Legrand / Krone.
Supply and fixing of Cat 6 RJ-45 information outlets including duel face plate of makes D Link / AMP / Molex / Legrand / Krone on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Makes : D Link / AMP / Molex / Legrand / Krone.
IP Based digtal Telephone (EPABX) system --- --complied with following specifications: > IP @ Core, PCM/TDM, Non blocking, > Must Support PRI, E1, Analog Junctions > Must Support PC Console, > Must support Mobile SIP (Android and I.O.S) > Must support Voice Mail > Must support Card based GSM > Inbuilt Call Details Software with search engine software > 4 Analog Trunks > 6 Digital Extensions > 48 Analog Extensions > 1 Digital Key Phone with minimum 16 Keys (Must work only on 2 wires) > Expandable to 64 Analog Extensions or more Approved Brands: NEC/ Alcatel/ Karel/ Unify
Supply and run of 2 pair telephone cable 0.5mm copper, in the existing PVC pipe including all labour charges etc complete.Makes : Finolex / Delton / Surabi / Polycab
Supply and run of 20 Pair telephone Copper wire., in the existing PVC pipe including all labour charges etc complete.Makes : Finolex / Delton / Surabi / Polycab.
Supply of 20 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement.
Supply and fixing of Modular socket type Telephone jack with Connector on required size Modular Box with cover frame with connections including cost and conveyance of all material and all labour charges etc., complete in N.R.B. Accessories Makes : Legrand Lyncus / GM Four Five / Goldmedal Curve / Anchor Roma Plus /Crabtree Verona / Panasonic Vision
Supply and fixing of 7 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone.Makes: Digisol / TP Link / D link. / Legrand
Supply and fixing of 3 feet length moulded patch cord including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone.Makes: Digisol / TP Link / D link. / Legrand
Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply and fixing of 24 port patch panelswith IO Separate including accessories and all labour charges etc complete. Makes : D Link / AMP / Molex / Legrand / Krone.Makes: Digisol / D Link / Legrand / TPLink
Supply and installation of 9U wall 600 mm width x 500 mm depth UL certified wall mounting net work rack with sheet steel revited metal frame,top and bottom cover with brush cable entry,confirming to following standards IEC 60529,EN 60529 ( IP 20), IEC 62262 EN 62622 (IK08) , DIN 41494, EIA 310, IEC 60927 including all accessories like horizontal PDU, metal cable manager, hardware packet and the cantilever shelf etc.,complete. Makes : Vallrack (Legrand) / Netrack.Makes : Vall rack (Legrand) / Netrack
Supply, Transportation and installation of 2.0KVA , 72VDC / 96V DC true on line UPS system IGB technology pure sine wave out put, with double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: Numeric / Emerson / Fuji Electric Makes: APC / Numeric / Emerson / Fuji Electric
Supply and fixing of 12V 65 AH SMF battery including wire leads Makes : Quanta / Racket / Exide.Makes : Quanta / Racket / Exide.
Supply and providing of UPS cum battery rack 5 to 10 batteries
CCTV SECURITYSYSTEM
Supply and fixing of 4MP Dual Light Vandal Dome Camera - 50Mtr 1/2.7" 4MP PS CMOS Image Sensor (0.9407Centimeters) Max. 4MP (2688 × 1520)@1–20 fps/(2560×1440)1-25/30fps Instastream, H.265, H.264,H.264H, H.264B, MJPEG Support Quad StreamWDR(120dB), Day/Night(ICR), 3D NR, ROI, AWB,AGC, BLC, HLC, Digital watermarking Support Built-in Mic IR Range of 50 Mtr, Warm Light Range of 30 Mtr 3.6mm fixed Lens Support Starlight Technology Micro SD Card, PoE, IP67, IK10. Model : CP-UNC-VC41L5C-VMD-LQ Make : CP PLUS
Supply and fixing of 4MP Dual Light Bullet Camera - 50Mtr 1/2.7" 4MP PS CMOS Image Sensor (0.9407 Centimeters) Max. 4MP (2688 × 1520)@20 fps/ (2560 ×1440)@25/30 fps Instastream, H.265, H.264,H.264H, H.264B, MJPEG Support Quad stream WDR(120dB), Day/Night(ICR), 3D NR, ROI, AWB,AGC, BLC, HLC, Digital watermarking IR Range of 50 Mtr., Warm Light Range of 30 Mtr 3.6mm Lens (6mm and 8mm optional) Support Starlight Technology Micro SD Card, PoE, IP67, IK10(optional). Model : CP-UNC-TC41L5C-VMD-LQ Make : CP PLUS
Supply and fixing of 32 Ch. H.265+ 4K Network Video Recorder Up to 32 channel IP camera input Max 320Mbps incoming bandwidth Smart H.265+/H.265/Smart H.264+/H.264/MJPEG Up to 12MP resolution preview and playback Support 2 SATA HDDs up to 10TB Each, 3 USB Ports (2 USB 3.0, 1 USB 2.0) 2 HDMI / 2 VGA simultaneous video output Support Multi-brand network cameras ONVIF Version 2.4 conformance Make: CP Plus
Supply and installation of Surveillance 6 TB Hard Disk Make : WD/ Seagate
Supply, Installation, Testing and Commissioning of 24 Port, 4 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply, Installation, Testing and Commissioning of16 Port, 2 GIGA fibre slots (SFP), power budget 250 W 10 / 100 / 1000 Gigabit PoE switchwith GIGA fibre slots (SFP). Makes : Digisol / TP Link / D link
Supply & Fixing of 55 inch LED monitor 4K smart commercial display unit with VGA HDMI, USB ports. Panel Type LCD, Aspect Ration 16:9, Resolution 3480 x 2160, Brightness 350 nits, Contrast ration 4000:1, Response time 8ms Approved Make : Samsung/ LG
Supply of unloaded 24 port patch panel with IO separate including all labour charges etc complete Makes : Digisol / TP Link / D link. / Legrand
Supply, Installation, Testing and Commissioningof 24 Port 10 / 100 / 1000 Gigabit Unmanageable Ethernet switch. Makes : TP Link / D link / Netfox
Supply Installation of 7 feet length moulded patch cord including accessories and all labour charges etc complete Makes: Digisol / TP Link / D link. / Legrand
Supply and installation of IP 20, IK 08 17U floor 600mm Width x 1000mm Deep Floor mounting network rack with all accessories like front and rear doors, fans, castor wheels (2 with break and 2 without break), cable manager, cantilever shelf, horizontal and vertical wer distribution unit, monitor shelf, brush at cable entry and hardware packet, etc. Mod cap floor stand : Modular construction of the rack made of 4 vertical , 4 Horizontal and 4 depth alloy extruded multi folded hallow profiles bolted and joined together with links and corner blocks. 3 Pairs of support channels to equate the load evenly and castor provision at bottom side.Painting shade : Combination of RAL 7035 / 7037 fine texture - 60 to 80 microns. or RAL 9005 fine texture - 60 to 80 microns complies with standards : UL 2416, Din 41494, IEC EN 60529, IEC EN 62262, IEC EN 60068-2-11, ISO 9001-2008.Netrack
Supply and installing HDMI cable low voltage grade as per standard specifications having 5 Mtr cord length with male and female 19 pin HDMI connectors as per requirement at site.
Sub Estimate : Providing Air Conditioning
Supply, Transportation and Installation of 2.0 / 1.8 TR 3 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R-410 with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with with warranty of compressor for 5 years iand comprehensive maintenance for 2 years Makes:Daikin / Bluestar / Hitachi / Toshibha or equivalent
Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air-Conditioner including foaming etc., complete. 1.7/1. 3/4" x 3/8" 2. 5/8" x 1/4" 3. 1/2" x 1/4" or equivalent sizes8" x 1/2"
Supply, Testing and installation of Drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department 25mm
Supply, Testing and installation of Drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes, with all required accessories Makes : Astral / Ashirvad or equivalent approved by the department 32mm
Supply of nominal capacity ductable split AC unit (DSU)(R410a)or its equivalent capacity with Split indoor unit and outdoor condencingunit Hermetically sealed compressor suitable for operation on AC supplycapable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units 4 core copper flexible chord and cordless remote control 8.5 TR
Supply of nominal capacity ductable split AC unit (DSU)(R410a)or its equivalent capacity with Split indoor unit and outdoor condencingunit Hermetically sealed compressor suitable for operation on AC supplycapable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units 4 core copper flexible chord and cordless remote control 5.5 TR
Lifting, Shifting & Positioning of non VRV-type Outdoor Unit on RCC slab / designated location as per site conditions. Includes rigging, safety & structural fastening.
Lifting, Shifting & Positioning of non VRV Indoor Units – Evaporator, Fan Casing, etc. Includes ceiling fixings, level setting, drain gradient & condensate alignment.
Supply & Installation of ACR-grade copper refrigerant piping, insulated with 19mm Nitrile rubber (Class O), including supports, clamps, joints and fittings.
Supply, Laying & Commissioning of 1.0 sq.mm 6-Core communication cable for ductable units , conduit, supports and accessories.
Supply, Factory fabrication, Transportation and errection of 22 guage GI sheet Rectangular ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats / TPF Flanges as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete. Makes : Tata / Zindal
Supply, Factory fabrication, Transportation and errection of 24 guage GI sheet Rectangular ducting with minimum 120 GSM as per SMACNA complete with neoprene rubber gaskets, Elbows, sheet metal / Angle iron / C-cleats / TPF Flanges as required, G.I.fasteners, bolts, nuts and washers, guide vanes as required, supports shall be galvanised threaded rods etc complete. Makes : Tata / Zindal
Supply, installation, testing and commissioningof GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, flanges etc as per specifications. The thickness of the damper frame shall be 16 guage and damper plate shall be 18 / 16 guage.
Supply and fixing of alluminium powder coated supply air grill without volume control dampers. (Architect shall approve the shade of epoxy power coating for the grills for supply and return air)
Supply & fixing of duct thermal insulation applied outside of the duct work withAll. backed Closed cell nitrile / Cross linked foam duly fixed with adhesive and tapes. (6mm/9mm Thickness)
Supplying and fixing single headed Internal / External hydrant valve with instantaneous Gun metal couplings of 63mm dia with Cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gun Metal cap and chain as required. Makes : Minimax / Safex / Newage / Winco / Padmini
Supplying and fixing of hose cabinet of size 750mm X 600mm x 250mm made of No 16 gauge SWG CRCA sheet with 6mm thick glazed glass door including necessary locking arrangement suitable to accommodate 2 Nos 15 mtr long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform and duly painted with Post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant as required.Makes : Minimax / Safex / Newage / Winco / Padmini
Supply, installation,testing and commissioning 63mm dia, 15 mtr long RRL hose / CP Hose pipe with 63mm dia Male and Female Gun metal / SS couplings duly binded with GI wire, rivets etc conforming to IS 636 (Type -A) as required.Makes : Minimax / Safex / Newage / Winco / Padmini
Supply and fixing 63mm dia Gun metal branch pipe with 20mm (Nominal internal diameter) size Gun metal / SS nozzle conforming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.Makes : Minimax / Safex / Newage / Winco / Padmini
Supplying and fixing First -Aid Hose Reel with MS construction spray painted in Post office Red, Conforming to IS 884 with upto date amendments, complete with the following as required. a) 36.6 Mtr Long 20mm (Nominal internal) dia water hose Thermoplastic / Textile reinforced / Rubber braided /Polypropylene Type - 2 as per IS:12585 Make: Eversafe/ Reliance/ Newage/ SRIb) 20mm (Nominal internal) dia gun metal globe valve and nozzle.Make: Newage/ Winco/ Padmini / Safexc) Drum and brackets for fixing the equipments on wall.d) Connections from riser with 25mm dia stop valve (gun metal) & MS pipe.
Supply, installation, testing and commissioning of 25mm dia Ball valve.Makes : Zoloto / Leader / Approved makes
Providing , laying, testing & Commissioning of following class " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., and fixing the pipe on the wall/ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete Makes : Jindal Hissar / Tata pipes 150mm dia
Providing , laying, testing & Commissioning of following class " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., and fixing the pipe on the wall/ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete Makes : Jindal Hissar / Tata pipes 100mm dia
Providing , laying, testing & Commissioning of following class " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., and fixing the pipe on the wall/ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete Makes : Jindal Hissar / Tata pipes 80mm dia
Providing , laying, testing & Commissioning of following class " B" MS pipes conforming to IS 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., and fixing the pipe on the wall/ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete Makes : Jindal Hissar / Tata pipes 25mm dia
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader / Zolotto / Intervalve. 150mm dia
Supplying, fixing, testing and commissioning of butterfly valve PN 1.6, with Bronze / Gun metal seat duly ISI marked complete with Nuts, Bolts, Washers, gaskets, conforming to IS 13095 of following sizes as required. Makes: Audco / Kirloskar / BDK / H-Shankar / Leader / Zolotto / Intervalve. 100mm dia
Supply and fixing 4 way fire brigade connection of cast iron body with 4 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 150mm dia MS pipe connection, conforming to IS 904 as required.Make: Minimax / Safex / Newage / Winco / Padmini
Supply and fixing 2 way fire brigade connection of cast iron body with 2 Nos Gun metal Male instantaneous inlet couplings complete with cap and chain as required for 100mm dia MS pipe connection, conforming to IS 904 as required. Makes : Minimax / Safex / Newage / Winco / Padmini
Supply, installation, testing and commissioning of approved make 25 mm dia. with automatic air release valve with unions etc. complete. (PN 16) ( Spring loaded type)
Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm minimum overlap as per standard specificatios. 80 mm nominal dia
Supplyand wrapping the anti corrosive material for buried pipes with coating of Primer and wrapping with 4 mm thick polymer corrosion resistant tape as per IS : 10221 with 15 mm minimum overlap as per standard specificatios. 100 mm nominal dia
Supply, installation, testing and commissioning of Pressure gauge ( PN 20 bar) of suitable range for pump sets with Ball valves, Fittings like unions / colours / reducers etc.(Glistering filled)Make: HGURU / FIEBIG
Supply, installation, testing and commissioning of Pressure Switch (PN 20 bar) of suitable range for pump sets with Ball valves, fittings like unions / colours / reducers etc., Make : Danfoss / Indfoss
Supply, installation, testing and commissioning of C.I. flanged " Y " type strainer with SS Mesh, suitable flanges, nuts, bolts, gaskets etc., complete. (PN 10 Rating) 150mm dia
Providing, installation, testing and commissioning of C.I non - return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc as required.Makes: Audco / Kirloskar / BDK / H-Shankar / Leader / Zolotto / Intervalve. 150mm dia
V - FIRE EXTINGUISHERS
Supply and fixing of Co2 4.5 Kg capacity type extinguisher with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683. For electrical room all taxes and all labour charges etc complete.Makes: FIREX /MINIMAX/ ARMOUR /SAFEX/ KANNEX / CEASEFIRE
Supply and fixing of ABC Powder type fire extinguisher of 6 Kgs. Capacity, with initial filling in brand new cylinder with powder coated finish, fitted with Gun metal union, high pressure gas cartridge, discharge hose, wall mounting bracket / stand etc. complete, confirming to IS:15683 (For car parking) Makes: FIREX /MINIMAX/ ARMOUR /SAFEX/ KANNEX / CEASEFIRE
External Electrical Installations
Supply and transportation and fixing of KL-24897 Pelican Fort Mini 50W LED CCT: 2700K, 3000K, 4000K, 5700K Dimension:Ø425 x 407 Mounting: D4 Product Finish: RAL 7016 Anthracite Grey, Graphite Grey, RAL 9004 Black, Optics: Type II Option: A9,A12 IP: 65 IK: 05 Make:K-Lite or its equivalant make approved by the Department
Supply and transportation and fixing of KP-12057-PCF- 014-003-G26-563-SA L0188-4910 Montana Pelican Mini Orna Eva Lighting Pole 5.630m Height (in mm): 5630 PoleType: P22 Arms: Single PF: Graphite Grey,Anthracite Grey,BlacK Make:K-Lite or its equivalant make approved by the Department
Supply and transportation and fixing of KP-9326-9205 Foundation Bolt 4 Nos of M16 Foundation J Bolt Length 500mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each Bolt Make:K-Lite or its equivalant make approved by the Department
Supply and fixing of suitable out door feeder piller box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board,suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schnieder make 63A, 4 Pole isolator as incomer, 9 Nos 6-32A SP MCBs as out goings, indication lamps, din channel, 6 Sqmm 3 core copper cable for invidual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following.
Supply and fixing of Automatic Street Light Control System based on daywise users settable mode of astronomical timer or digital timer Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 380 - 480V AC, 50 HZ and shall withstand surge level of 8 KV. The electronic controller with IP 65 protection and suitable SMC / PC enclousure with IP 54 protection, MCBs of Legrand / Schneider / LK / Siemens / BCH of 10kA C curve and Contactor suitable to control the load 8 KW Three phase load with necessary hardware, Allen key set and clamping arrangements. Makes : Swadeep / Light Mate / Havells
125 KVAGenerator Set
Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 125 KVA out put continuous rating directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMF control panel having IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms IV, sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned.
A . Alternator : Kirloskar / Stamford / Crompton Greaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS:13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21.
B .Diesel Engine : Kirloskar / Cummins Diesel Engine start, developing suitable 585BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 125KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc. 01. Exhaust pipe of required size and length with insulation or clading. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)
Supply and Run of 50mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (2.36Kgs/1Mtr)
Supply and Run of 50.mm x 6mm copper strip including cost of all accessories and labour charges etc., complete.
Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete. (0.104Kgs/1Mtr)
Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 16 Gauge CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process . The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip 40 x 6 mm, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards for Lighting panel. (Panel shall be manufacture only from CPRI approval fabricators.)
250A Alluminium Bus Bar with colour coded sleeves.(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Supply of 250A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermal magnetic release Panel Mounted
Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V
OUT GOING FEEDERS
Supply of 125A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-4Nos
Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH
Supply of 63A 3 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25 KA with thermal magnetic release Panel Mounted.-6Nos
Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH
Supply of 6-32A 10KA TP MCB, C/D Curve ISI Mark.-4Nos
Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH
Supply of 40A 10KA TP MCB, C/D Curve ISI Mark.-4Nos
Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH
Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).
Supply and erection of 0-125A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No
MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL.
Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No
Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No
Supply and erection of LED indication lamps on the existing panel board. - 3 Nos
Supply and erection of LT current transformer with bar primary 125 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos
Control wiring for MCCBs, Metering, Control MCB, Bus bar Links, Cable Managers, Terminal Blocks, Rotary Handles and Spreader links etc., including Labour charges for errection of switch gears, panels boards including all labour charges etc with connections for finished items of works including transportation charge.
Supply, installation, testing and commissioning of floor mounting type panel board with Alluminium bus bars fabricated with 16 Gauge CRCA Sheet comprising of TPN bus bars with bus bars of equal size in all phases and neutral equipped with bus bar chambers and cable chambers. The bus bars fault level shall be 50 KA and shall be as per the requirement of local CEIG, fire regulations, CPRI norms and other authorities etc. The painting of the complete system shall be powder coated duly processing the panel in 7 tank process . The panel shall be suitable for accomdating the following switch gear including supply of all components, hard wares etc including all necessary civil works, adequate reinforcement foundation bolts, suitable G.I earth strip 40 x 6 mm, door loop earthings , bus bars should be colour sleeved with heat shrinkable sleeves for phase and neutral duly supported at regular intervels by SMC supports and all cables shall have proper cable entry, danger board, feeder identification marks, rigid inter connections, cadmium plated bolts and nuts and shall be installed and consisting of the following as required and as per IS standards for Lighting panel. (Panel shall be manufacture only from CPRI approval fabricators.)
125A Alluminium Bus Bar with colour coded sleeves.(0.8A/Sqmm).
Internal wiring with approved make cable
Earthing Flat: Providing suitable G.I Flat
Supply of 125A 4 Pole MCCB, Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 25kA with thermal magnetic release Panel Mounted - 1 No
Makes : LK (L&T) - D sine / Schneider-NS NSX/Legrand -DP X3/ Siemens-3V
OUT GOING FEEDERS
Supply of 50-63A 10KA TP MCB, C/D Curve ISI Mark.-6Nos
Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / LK (L&T) Exora / Crabtree / Indo Asian / BCH
Supply and erection of 0-500V volt Digital meter of size 96x96mm on exisiting box / panel board including connections etc., complete. - 1 No
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).
Supply and erection of 0-125A Digital Ammeter of size 96x96mm on existing box / panel board including connections etc., complete. - 1 No
MAKES : CONZERVE / ELMEASURE / L&T / SEIMENS / HPL.
Supply and erection of selector switch for Ammeter on the existing box / panel including connections etc., complete. - 1 No
Supply and erection of selector switch for voltmeter on the existing box / panel including connections etc., complete. - 1 No
Supply and erection of LED indication lamps on the existing panel board. - 3 Nos
Supply and erection of LT current transformer with bar primary 125 / 5A ratio in the existing panel including connections etc., complete. - 3 Nos
Control wiring for MCCBs, Metering, Control MCB, Bus bar Links, Cable Managers, Terminal Blocks, Rotary Handles and Spreader links etc., including Labour charges for errection of switch gears, panels boards including all labour charges etc with connections for finished items of works including transportation charge.
Supply of 300 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 240 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 185 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 95 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 50 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 25 Sqmm 3.5 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I).Makes : Polycab / Havells KEI / Finolex
Supply of 10.0 Sqmm 4 Core PVC / XLPE Insulated, Flexible Armouring Flexible Copper cable as per IS 7098 / Part-I / 1988 including all transportation charges etc complete.Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard
Earth work excavation of Trench in hard ground soil up to a depth of 0.9Mtr and laying of U.G cables 70 to 400Sqmm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., comkplete (as directed by departmental official).
LT CABLE TERMINATIONS:
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 300Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 240Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 185Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 95Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 50Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 25Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 16Sqmm, 3.5 Core XLPE insulated armoured cable, including all labour charges and miscellaneous items etc complete Makes: SMI / Commet / Dowels
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 240Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 185Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 95Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 50Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department e.
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 25Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department e.
Supply and fixing of heavy duty long barrel alluminium lugs confirming to I.S specifications suitable for 16Sqmm cable etc complete with nuts, bolts and washers Makes: DMI / Jainson / Dowels or equivalent make as approved by the department
Supply of 3 Core 11 KV 95 Sqmm HT XLPE (E) armoured Cable. As per IS specification confirming to IS 7098/II/85 with latest ammendments. Makes: Polycab / Havells / KEI
Providing and errecting heat shrinkable indoor termination kit for 11 KV XLPE HT cable 3 core 95 Sqmm with necessary materials etc., complete. Makes : Transeal - Hong shang / Raychem / M Seal / Multy
Providing and errecting heat shrinkable outdoor termination kit for 11 KV XLPE HT cable 3 core 95 Sqmm with necessary materials etc., complete with anti tracking red colour material as per IEC / IS specs only. Makes : Transeal - Hong shang / Raychem / M Seal / Multy
Supply and Installation of 300mm x 50mm x 2mm thick GI perforated cable tray with out cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. complete. Makes:DEC/MNR/Aparna/HFAB orequivalent
Supply , fabrication and transportation of MS channel iron/ angle iron /flats including two coats of alluminium paint and one coat of red oxide paint including all labour charges etc complete.
Total number of items ( 706) Seven hundred and six only
Total ECV Rs.73,03,28,099(Rupees Seventy three crores three lakhs twenty eight thousand and ninety nine only)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Temple kodangal Bid Document .doc
TENDER_DOCUMENT • 1.49 MB
VKB Temple BOQ final (1).xls
TENDER_DOCUMENT • 0.73 MB
Download all tender documents and submit your bid