REPAIR TO FLOORING RAILING STAIRCASE OF COMMON AREA JOINERY PLASTER PLUMBING AND SANITARY WORKS AT OLD NAVY NAGAR UNDER AGE BRI OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Demolition of brick or stone / boulder work, built in cement mortar in portion/ part ordered to be dismantled including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified .

M & L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4

Taking down cement plaster on brick or stone wall etc of any description including racking out joints hacking for key scrubbing down with water.

M&L Plastering on concrete surfaces of beams, lintels, walls etc, 20mm thick (15+5mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified

M&L for preparing newly plastersed surfaces of wall and soffits/sides of chajja/roof projection and applying two coats of acrylic paint exterior grade (100% Acrylic) over a coat of primer complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth, or wall tiling / stone (marble, granite, kota etc) incuding cement mortar bedding with backing etc & rubbish off the premises complete all as specified & directed

S&F Non skid coloured ceramic tiles 300x300x 7 to 8 mm thick in floors etc set & jointed in neat cement slurry and pointed in white cement mixed with colour pigments to match the coloured tiles over and including 20 mm thick cement screed bed in cement mortar 1:6 complete all as specified.

S&F glazed coloured ceramic tiles 300 x 200 x 6 to 7 mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the coloure of tile as in vertical surfaces over and including 10 mm thick cement plaster in cm 1:4 complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&L pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves

Demolition of cement concrete un-reinforced not exc 15 cm thick of any description and at any position and removing the debris outside the MD land.

M&L for 75mm thick PCC (1:3:6 ) type C-1 using 20 mm graded stone aggregate as in plinth protection laid in panels finish the top surfaces even and smooth without using extra cement

M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A'

M&L 75 mm thick PCC 1:3:6 type C-1 (20mm graded agg) as in sub base flooring ,and similar works finished even & fair without using extra cement.

M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete.

M&L for Sand filling under floors or in foundation including watering and consolidation etc complete.

M&L coloured glazed cement concrete tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete (Note : Cost for 20 mm thick cement screed is inclussive in the rate. No separate payment to be made.)

Dismantling stone slab including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for granite (of any type) work 18 to 20mm thick (table rubbed and polished) for wall lining (veneering to wall) over 15 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)

M&L machine cut pre-polished kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement plaster )

M&L rendering 15 mm thick in CM (1:6) on wall finished even and smooth without using extra cement

M&L applying two coats of oil emulsion distemper white or tinted on wall over a coat of primer & chalk whiting on new plasterd surfaces of wall after necessary preparation of surface complete all as specified.

M & L rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality-B complete all as specified and as directed by Engineer-in-charge

M & L preparing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M & L Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thk in flooring, all as speciifed and directed

M&L for preparing old plastered surfaces of wall and applying two coat of oil bound emulsion distemper complete all as specified.

M&L applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified.

M&L preparation of old painted surfaces over 10cm width or girth and applying one coats of synthetic enamel paint on steel surfaces all as specified

M&L preparation of old undecorated surfaces of walls,soffits & fascias of chajjas etc and applying one coat of weather proof Acrylic based paint(100% Acrylic) exterior grade complete all as per manufacturers instructions all as specified & directed by Engineer-in-charge.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area exc 1.50 Sqm but n-exc 4 Sqm each all as specified.

Supply and fixing factory made plain framed panelled shutters (two panel ) 35mm thick 2nd class hardwood with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 103 ( Part -I) kiln seasoned and chemically pressure treated. complete fixed to chowkats all as specified.

Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S&F Supply only 100mm long butt hinges medium weight cold rolled all as specified.

S& F mild steel helical door spring 300mm long ordinary rat tail rod pattern spring including roller and roller plate and riveted and welding to existing angle iron chowkats complete all as specified.

Supply and fixing aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples all as specified.

All as per item No 37.00 aboe but fixed in repairs.

S&F Factory made PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm plain colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2010 Part 11. complete all as specified and directed.

S&F factory made solid PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tuve 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails MS frame shall be covered with 5mm thick heat moulded plain colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick plain colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11. The with of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11. Each PVC door shutter lef consist of 4 Nos 100 mm long MS power coated butt hinges. complete all as specified and directed.

Supply & fixing Aluminium alloy anodised sliding door bolts withhasp and stapple (bolt type and fxing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long all as specified.

Preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

S&F in repair towel rail long 600 mm long of PTMT fixed with and including chromiun plate brass screws and wooden / plastic cleats( minimum weight 190 gms ) complete.

Supply & fixing aluminum anodised barrel tower bolts of extruded section and fixed 150 mm long (ISI marked)

Supply and fixing Aluminium anodised alloy cast type anodised handles of size 150mm long all as specified.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area n.exc 1.50 Sqm each all as specified.

P LAXMI AND CO.

K.S CONSTRUCTION

ASHOK CONSTRUCTION

Unitech Enterprises

NATH CONSTRUCTION

SAHU AND SAHU CO.

Frends Enterprises