Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 CrAccepted-AOC WARD NO 2 JEETPUR BAHERI P O KADH TEHSIL GHANARI DISTRICT UNA H P | UNA | HIMACHAL PRADESH | 174301 | ₹1.5 Cr Quoted ₹2.0 Cr | L1 | Accepted-AOC AOC |
| 2 | Rejected-Technical | - | - | Rejected-Technical Not fulfill the work done conditions, hence rejected |
Tender Value
₹98.1 L
EMD Value
₹2.0 L
Closing Date
9 Sept 2019, 10:30 amClosed
Executive Engineer
HPSIDC Ltd. Shimla
Construction of Model Career Building of Labour Department at Reckong Peo, Distt. Kinnaur (HP).
2019_SIDC_31078_1
Job No. 5
Open Tender
Civil Works - Buildings
Item Rate
720 days
Peo (Kinnaur)
Please refer Tender documents.
8 documents required · 8 mandatory
₹5,900
EE HPSIDC Ltd. Shimla
₹2.0 L
29 Jul 2021
26 Aug 2019
9 Sept 2019
26 Aug 2019
9 Sept 2019
26 Aug 2019
Amount
Excavation in foundation, trenches etc. in earth work in all kind of soil & lifts upto all heights and stacking the excavated soil in all specified distance. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all the surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed.
Excavation in drains and channels etc. in earth work including dressing of side & bed & disposing of excavated earth upto all leads & lifts disposed earth to be levelled neatly dressed.
Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.
Providing form work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor to ceiling in all heights and removal of the same for in-stu reinforced concrete and plain concrete work in:- a) Foundation, footing bases of colums etc. and mass concrete.
b) Columns, pillars, post and struts, square, rectangular or polygonal in plain.
c) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels in all depths and heights from floor.
d) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.
e) Stair cases with slopping or stepped soffits excluding landing.
f) Vertical surfacessuch as walls (any thickness) partitions and the like i/c attached pilasters buttresses, plinth and string courses and the like.
Providing & laying mechanically mixed & vibrated reinfirced cement concrete work 1:1.5:3 (1cement: 1.5sand: 3 well graded stone aggregate 20mm nominal size) proportionally by weight with 43 grade cement @ 400 kg/cum minimum M-20 grade and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all height as per HPPWD specifications with updated BIS norms. a) Foundation footing bases of columns etc. and mass concrete.
b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain upto all floor levels.
c) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and cantilevers all floor level.
d) Stair cases (except spiral staircases) excluding landing but prepairing of the surface and finishing of nosing upto all floor levels.
Providing tor steel reinforcement (Fe 415/ Fe-500 D as per design) for RCC work including bending, binding and placing in postion complete upto all floor levels as per HPPWD specification with updated BIS norms.
Providing wood work in frames of doors, windows, clearstory and other frames, wrought, framed and fixed in position. Hard wood/Sal wood.
Prooviding 40 X 3mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia bolts, nuts and wooden splug and immeging in cement concrete block 10x10x15 cms. 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size).
Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enamelled iron butt hinges with necessary screws. 35mm thick 2nd. Class Deodar Wood.
Providing and fixing anodized aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. (a) 300mm x 16mm.
Providing and fixing aluminium tower bolts (berrel type ) anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. a)200x10mm.
Providing and fixing aluminium handle anodized transparent or dyed to required colour and shade with necessary screws etc. complete. (a)125mm.
Providing and fixing oxidized M.S. hooks and eyes 150mm
Brick work using common clay burnt building bricks in foundation and plinth in cement mortar 1:6 (1cement: 6 sand) 2nd class bricks upto all height.
Brick work using common clay burnt building bricks in superstructure above ground level in cement mortar 1:6 (1cement: 6 sand) 2nd class bricks upto all height.
Half brick masonry in comman burnt clay building bricks in superstructure above plinth level upto floor two level with cement mortar 1:4(1cement:4 sand) 2nd class bricks
6mm cement plaster in ceiling with cement mortar 1:4(1cement:4 sand).
15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement :6sand).
15mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement :6sand).
Providing and laying mechanically mixed & vibrated cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 40mm nominal size ) excluding cost of form work in walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level.
Providing and laying granite stone in flooring 20mm (average) thickness base of Cement mortar 1:3 ( 1 Cement : 3 Sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm thick i/c moulding of nosing complete.
Providing & fixing 19mm thick commercial board water proof shutters also in shelves/ box for cupboard i/c fixing with nickel plated piano hinges with screws etc. complete i/c sunmica, handles, magnetic catchers hasps and staples etc. complete.
Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement.
White/ Coloured glazed tile 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry.
P/F 10mm thick anti skid water proof stain & impact resistant heavy duty vetrified tiles 600 x600 x10 mm manufactured of approved shade & colour in flooring, treads of steps & landings laid over 12mm thick cement mortar 1:3 (1cement : 3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.
Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. With M.S. flats, square bars with round headed bolts and nuts or by screws. Plain grill.
Steel work welded in built up section, trusses and framed work, including cutting, hoisting, fixed in position & applying a priming coat of red lead paint in :- a)In trusses and trussed purlins in building.
b) In gratings framed guard bars, ladders, railing, brackets and similar works.
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge.
Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron j or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.
Providing & fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/ facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately).
Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long.
Applying priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink.
Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. (a) White paint.
Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome.
Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.
Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.
Finishing wall with Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.
Stone soling prperly handpacked filling interstices with kharnja stone & consolidated i/c spreading watering & compaction of binding materials moorum or earth etc. Complete as per HPPWD specification.
Applying cement slurry on Cement concrete work using 2.75kg of cement per sq. meter of floor/wall complete in all respect.
Cement concrete flooring 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40mm thick.
Providing and fixing high pressure PVC pipe spigot and socket soils waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. complete. a)150mm
P/f P.V.C. Fittings and accessories. a) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 150mm dia
b) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 110mm dia
c) P/f PVC plain bend ISI marked including fixing with approved adhesives etc. Complete 75mm dia
d)P/f PVC Single equal branch including fixing with approved adhesives etc. complete 110mm
e)P/f PVC Single equal branch including fixing with approved adhesives etc. complete 75mm
Providing and fixing PVC clamps ISI marked of approved design with steel screws and raw plugs etc. complete. a)150mm
Providing and laying in trenches, galvanised mild steel tubes(medium grade), tube fittings (earth work in trenches to be measured and paid for seperately) 20mm nominal bore minimum weight 1.22 Kg/Rmt.
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium Grade) tube fittings and clamps i/c making good the wall, ceiling and floor. 15mm nominal bore.
Making connection of galvanized mild steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and treading the pipes complete.
Providing & fixing pvc floor trap ISI marked of self cleaning design i/c fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110mm x 75mm.
P/F vitreous china wash down water closet (European type, W.C. Pan) with integral 'P'or 'S'trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement:1 Sand) (Seat and cover to be measured and paid seperately) Ordinary Closet.
Providing and fixing PTMT Coloured/ white automatic flushing cistern with a pair of PVC/ C.I. or M.S. bracket complete with fittings i/c PVC syphonic appratus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet & over flow pipes i/c cutting holes and making good the same. 10.00 ltrs. net capacity
P/f plastic seat and cover for wash down water closet with CP brass hinges and rubber. Solid type white plastic seat and cover
Providing and fixing PTMT jet spray of approved quality and colouer with one metre tube.
Providing & fixing vitreous china wash basin with pair of hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm.
Providing & fixng CP Brass waste for wash basin or sink 32mm dia.
Providing & fixng PTMT waste coupling of approved quality and colour 32mm nominal bore.
Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap.
Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers.
Providing and fixing C.P. brass towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass screws. 600mm x 20mm.
Providing & fixing CP brass Pillar tap with capastan head 15mm dia.
Providing & fixing CP brass bib tap with capastan head 15mm dia.
P/F C.P. brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws.
P/F C.P. brass angle valve 15mm without Nuts and pipe.
P/F brass stop cocks: (a) 15mm dia
(b) 20mm dia
Providing & fixing PVC connection pipes with brass unions 45cm lenght 15mm nominal bore.
Providing and fixing G.I. or M.I. unions. 15mm dia.
Providing and fixing white glazed fireclay stall urinal with automatic C.I. Flushing cistern (of approved make) with fittings R.S. Or C.I. Brackets standart size C.P. Brass flush pipe spreaders with unions and clamps (all in C.P. Brass) C.I. Trap with outlet grating and other coupling in C.P. brass including painting of cistern and fittings, cutting and making good the walls and floors where required: Single Stall urinals with 5 litres C.I. automatic flushing cistern.
Providing and fixing Division Plate for urinals 600mm x 300. Vitreous China
Providing and fixing PVC water storage tank G.I. Inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement i/c hoisting upto all heights above ground level: 1000 ltrs. net Capacity tank.
Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete including curing complete and testing. Inside size 800 x 800mm and 500mm deep including RCC cover and frame medium duty 500mm internal dia with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement: 3sand) complete.
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. / MS brackets painted white i/c cutting holes and making good the same but excluding fitting. 610 x 460mm with bowl depth 200mm
Cutting in earth work in all kind of soil and disposal of excavated earth upto all leads and lifts as per direction of the Engineer-in-Charge.
Excavation in foundation, trenches etc. in earth work in all kind of soil lifts upto all heights. Stacking the excavated soil in all specified distance. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed.
Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.
Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and cenetering below support floor to ceiling in all heights and removal of the same for in-situ reinforced concrete work and plain concrete work in :- (a)Vertical surfaces such as walls (any thickness) partitions and the like i/c attached pilasters buttresses, plinth and string courses and the like.
Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (1cement:3sand:6graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in walls including attached buttresses, pilasters and their caps and bases string course etc. upto floor two level.
Providing and Fixing weep Hole with 90mm thick PVC pipe
Stone filling behind protection wall.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .