Improvement or hmp through road work from chaitany awasthi house no.505 to 84 Under Ward-09 Zone-5

Dismantaling of old interlocking including stacking of materials as directed by Engineer-in chage with in a distance of 60mt.(200feet)

Construction of granular sub base (GSB) by providing coarse graded material, spreading in uniform layer with mortor grader on prepared surface, mixing by mixin place method with rotovator at OMC and compacting with viberatory roller to achieve the desired density as per clause 401.

Providing & Laying 80mm thick r/m interlocking tiles etc all comp.

Prov./applying tack coat with bitumen(VG-10) USING bitumin pressure distributer @0.20 KG/Sqm on prpared bitumiious/granular surface cleaned with machnicall brrom etc.all complete.

Prov./laying bitumious concrete(BC) with computrised HMP type hot mix plant producing an averge out put of 75 tonnes per hour crushed aggregates of specifited grading primixed with bittuminous binder (CRMB-55 )@ 5.4%of mix and fiiler transported to site laying with a hydrostatic paver finisher with sensor control to the required graded level and alignment folling with smooth wheeled vibratory and tantom rollar to achive the desired compaction specification CLAUSE no.509 as per MORTH the disired compaction etc.

providind & laying hot applied Thermo plastic compound 2.5 mm thick including refletorosing glass beads @ 250gm/sqm ares thickness of 2.5 mm exclusive of surface applied glass beads as per I.R.C 35 the finish surface to be level uniform and free from streaks and holes etc all work comp.

providind & laying hot applied Thermo plastic compound 2.5 mm thick including refletorosing glass beads @ 250gm/sqm ares thickness of 2.5 mm exclusive of surface applied glass beads as per I.R.C 35 the finish surface to be level uniform and free from streaks and holes etc all work comp.

providind & laying hot applied Thermo plastic compound 2.5 mm thick including refletorosing glass beads @ 250gm/sqm ares thickness of 2.5 mm exclusive of surface applied glass beads as per I.R.C 35 the finish surface to be level uniform and free from streaks and holes etc all work comp.

providind & laying hot applied Thermo plastic compound 2.5 mm thick including refletorosing glass beads @ 250gm/sqm ares thickness of 2.5 mm exclusive of surface applied glass beads as per I.R.C 35 the finish surface to be level uniform and free from streaks and holes etc all work comp.

providind & laying hot applied Thermo plastic compound 2.5 mm thick including refletorosing glass beads @ 250gm/sqm ares thickness of 2.5 mm exclusive of surface applied glass beads as per I.R.C 35 the finish surface to be level uniform and free from streaks and holes etc all work comp.