Dismantling of Ceiling plaster in phase V, Internal painting and other miscellaneous Civil works at Mod Labs Building at North Site, BARC, Trombay, Mumbai.

Amount

Dismantling old ceiling plaster carefully and cleaning the surface for plaster including scaffolding, disposal of rubbish to the dumping ground within 100 m lead, cutting of 2nos. of 10 mm M.S. Rod per Sq.m. if required etc. complete including protecting the permanently fixed laboratory equipments, other equipments, fragile materials etc. while dismantling. After dismantling and disposing the rubbish, providing and applying white cement based wall putty (Birla wall Care or approved equivalent) over concrete or Plastered surface minimum 3 mm and up to 6 mm thick including cleaning complete all as directed by the Project Engineer. 'Notes: 1. Fan coil units, fixed equipments in lab etc. to be covered with tarpolene/plastic cover. 2. While dismantling plywood platforms should be fixed on the scaffolding to protect the underlying equipments. This item includes bringing dismantled debris/rubbish from all the floors to the dumping ground within 100 m lead. Dismantling of plastering should be done by chiselling and mechaical means without damaging the RCC.

For ceiling height up to 4m above FFL

For ceiling height up to 7m above FFL

For ceiling height up to 10m above FFL

Providing and applying two coats of anti-carbonaton paint of approved colour and shade of approved manufacturers on concrete surfaces (ceilings, beams, columns etc.)

Providing structural Repairs in Old Damaged concrete structures / surfaces with approved Polymer with following operations : 1) Removal of loose/Spaled or damaged concrete by chipping and cleaning the concrete suface and Reinforcement steel with wire brush and with water jet. 2) Cleaning the Re bars with Acetone for complete Rust removal and washing with water jet to prepare the surface free from Acid content. 3) Applying Protective Coat / bond coat using Polymer and Cement in the proportion of 1: 1.5 (1 part of polymer and 1.5 parts of cement in Synthetic enamal paint like consistancy with brush 4) Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the proportion of Cement 50 Kg : Washed and dried river sand 87.50 kg : Silica sand 37.50 Kg mixed with 10 litres of Polymer (or 1 Kg cement : 1.75 kg Washed and dried river sand : 0.75 Kg Silica Sand : 200 ml polymer) 5) If thickness of repair exceeds 20 mm, after every 20 mm thick bond coat as per 2 above to be applied before continuing further structural repair works. This work is inclusive of all materials, labour, scaffolding complete all as directed at site, using approved Polymer suitable for Structural repair shall be used

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor

Using TMT bars of specified grades all dia bars confirming to IS:1786. TMT bars to be supplied by the contractor ISI Mark only

Providing 15mm thick plastering using Readymix internal plastering compound of approved quality for internal faces of brickwork/ concrete surfaces including preparation of the surface, curing, cleaning, scaffolding complete all as per specifications and as directed at site by the Engineer-in -charge.

Providing and applying white cement based wall putty of approved quality over concrete or Plastered surface up to 3mm thick to get uniform surfacefree fro undulation including cleaning complete all as directed by the Engineer-in-charge.

Providing and applying one coat of cement primer of approved brand on wall surface to receive specified paint including scaffolding complete all as per specifications and as directed by the Engineer-in -charge.

Providing and treating the OLD surface ANTIFUNGAL treatment using product approved by Department i) entire old paint to be scrapped out ii)The neeru/ cement punning to be removed by chipping completely iii) one coat of BIOWASH to be applied iv) entire surface to be finished with White cement based Wallputty of approved quality to get uniform undulation free surface complete as directed by the Engineer-in -charge.

Providing and painting, finishing with antifungal paint using paint approved by department with two coats over treated surface all as per manufacturer's specifications and as directed by the Engineer-in -charge

Providing and applying wall painting two coats on new work with premium plastic emulsion paint of approved brand to give an even shade without cement primer including preparation of the surfaces, scaffolding complete. As per specifications and as directed by the Engineer -In Charge.

Providing, applying wall painting two coats with Lustur paint of approved brand to give an even shade over a coat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing, applying one coat of primer with readymixed redoxide primer of approved brand and manufacturer on steel works including preparation of the surfaces, scaffolding complete. As per specification & as directed by the Engineer -in -charge.

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat. Including preparation of the surfaces, scaffolding complete.as per specifications and as directed by the Engineer-in -charge.

Providing and applying one coat of primer with ready mixed pink or grey or white wood primer of approved brand and manufacture on woodwork (hard and softwood) including preparation of the surfaces, scaffolding complete. As per specifications and as directed by the Engineer-in -charge.

Providing and painting over wooden surfaces with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade wih two coats on new work excluding wood primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer- in- charge.

Providing and applying French spirit polishing for wooden sufaces with two coats on new works including a coat of wood filler to form a uniform neat finish as directed by the Engineer -in-charge and / or as per the specifications complete as directed by the Engieer-in-charge

Removing the damaged PVC Flooring carefully including removing the resins sticking on the floor, cleaning the floor carefully stacking the serviceable materials at places shown and disposing the unserviceable materials within 50 m lead at places shown complete as directed by the Engineer-in-charge.

Providing and Fixing Homogeneous 2.00 mm thick UV resistant PVC tile in flooring wooden veeneer finish and skirting in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer like Dunlop-S -758, Fevicol SR 998 , PolygripSP or equivalent including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-Charge in approved colour and shade

Providing and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade

Supply of manpower for carrying out shifting and re-arragement works of furnitures, equipmets, instruments etc. with necessary safety precautions and also seasonable departmental work alloted by the Engineer -in -charge . Note :- Personal protective equipmets for labours shall be arranged by contractor at his own cost.By using Un-Skilled Manpower. 'Deployment: The contractor shall deploy un-skilled worker for each job for 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift whenever necessary as per the discretion of the Engineer-in-Charge during the contract period.

Providing and fixing 6 mm thick e-board in panelling, masking, fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge

Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and dispoal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding

Making the opening in brick masonry for door / window / clear story opening including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface including disposal of mulba/ rubbish to the nearest dumping ground

Provding and constructing brick work in Cement mortar using standard bricks of approved class/ quality, brand in foundation and plinth including curing, raking out joints, simultaneous pointing below plinth level if specified, complete as per drawings, specifications and as directed by the Engineer-in-charge

Brick work in C.M 1:4 using crushed sand.

Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge

Providing and fixing 3 mm thick Aluminium sheet covering over expansion joints with iron screws as per design to match the colour / shade of wall treatment including all materials, labour, scaffolding complete as per drawings and specifications. 150 mm wide anodized 3mm thick Aluminium sheet to the shape.

Providing and laying in position bitumen hot sealing compound for expansion joints using approved quality.

Providing , supplying and fixing Venition Vertical Blinds / Curtains ( approved)with all accessories and fabricating to required sizes etc as per approved design and approved Fabric complete all as directed by the Project Enginee

Supplying of Sign Danger/Safety/Caution Tape Roll of 100m length

Supplying of two component rapid curing paste 1111 (SuperMetal Solidifier) of M/s BELZONA Polymerics Ltd. or equivalent approved. It shall be water based epoxy resin, anti-corrosion, high strength structural adhesive etc. The paste is silicon steel alloy blended with high molecular weight reactive polymers and oligomers in Mod Lab, CED store, including transportation, loading, unloading, stacking etc. complete as per specifications and as directed by Engineer-in-charge. The shelf life of the product shall be five years from the date of manufacturing. Note:- Contractor shall submit the product brochure and test certificates before supplying the material to the department.

Supplying of two component rapid curing paste 1212 (Metal Polymer) of M/s BELZONA Polymerics Ltd. or equivalent approved. It shall be water based epoxy resin, anti-corrosion , high strength structural adhesive etc. The paste is silicon steel alloy blended with high molecular weight reactive polymers and oligomers in Mod Lab, CED store, including transportation, loading, unloading, stacking etc. complete as per specifications and as directed by Engineer-in-charge. The shelf life of the product shall be five years from the date of manufacturing. Note:- Contractor shall submit the product brochure and test certificates before supplying the material to the department.

Supplying of 9341 Reinforcement tape of M/s BELZONA Polymerics Ltd. or equivalent approved in Mod Lab, CED store, including transportation, loading, unloading, stacking etc. complete as per specifications and as directed by Engineer-in-charge. Note:- Contractor shall submit the product brochure and test certificates before supplying the material to the department.

S.B. PAWAR SAIRAM CONTRACTORS

S.V ASSOCIATES