Loading
Loading…
Loading…
Tender Value
₹70 L
EMD Value
₹1.3 L
Closing Date
23 Oct 2026, 6:00 pm
Shri M S Bansode IDSE CWE
Commander Works Engineers No. 2, Brichgunj, Junglighat Post, Sri Vijaya Puram 744 103
COMPREHENSIVE REPAIR AND MAINTENANCE OF B/R WORKS TO CERTAIN OTM ACCN AT ZONE-II UNDER GE BRICHGUNJ, SRI VIJAYA PURAM
2026_MES_790833_1
80479
Open Tender
Civil Works
Item Rate
270 days
Sri Vijaya Puram
Class C Category a i
9 documents required · 9 mandatory
₹1,000
Garrison Engineer Brichgunj
₹1.3 L
Yes
25 Sept 2026
25 Sept 2026
26 Oct 2026
25 Sept 2026
23 Oct 2026
16 Oct 2026
25 Sept 2026 - 2 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified and as direcred by Engineer -in-Charge. | 20 | Each | - | - |
| 2 | All as per Item No. 1 above but exceeding 1.5 Sqm and n.exc 4.00 Sqm complete all as specified and as direcred by Engineer -in-Charge. | 108 | Each | - | - |
| 3 | Taking down shutters of any description n exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge. | 30 | Per Leaf | - | - |
| 4 | Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge | 30 | Per Leaf | - | - |
| 5 | S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by Engineer-in-charge. | 1,080 | Kilogram | - | - |
| 6 | S&F Powder coated aluminium door shutters, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed by Engineer-in-charge. | 76 | Square metre | - | - |
| 7 | S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos), hinges type B-21 100mm long (2 Nos) suitable handle (1 no) complete all as specified and and as directed by Engineer-in-charge. | 200 | Square metre | - | - |
| 8 | Supply and fix solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing in SSR complete all as specified and as direcred by Engineer -in-Charge. | 50 | Running metre | - | - |
| 9 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and as direcred by Engineer -in-Charge. | 15 | Square metre | - | - |
| 10 | M&L aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge | 300 | KG | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.68 MB
80479sTenderFinal.pdf
Tender Documents • 1.52 MB
BOQ_887045.xls
BOQ • 0.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .