Payjal hoj nirman kary likhamdas taal udwala

15 cm. To cover the ground surface by cutting the average soil and removing vegetation and small plants and lifting of raw material and shrubs for 1.5 meters and putting them up to a distance of 50 meters.

Digging soil up to 1.5 depths in the foundation, ditch, barn, crushing the bottom, pouring water, grooming the armpits, removing the carved soil, refilling the empty places with soil after filling the foundation and removing the remaining soil for a distance of 50 meters

Cement concrete foundation or floor 40 mm. The stone of the renowned measure is to be poured into the limestone ballast /brick soil, cement-sand masala in the ratio of 1 cement : 4 sand : 8 ballast and cutting, including lowland.

Cement concrete mixing, pouring and operating a nickel and surface vibration machine (vibrator) on the top surface of the road and preparing it in the desired grade, chamber and super elevation for non-sliding surface! In 1:2:4 mix

The work of cutting, folding and placing and tying iron for RCC work is done to supply.

In the foundation and chair, they are made of stone in cement-gravel spices, including the edge of the side and the lowlands etc. In CM 1:4

Foundation and chair first class brick masonry cement - gravel in 1:6 spices, including bunding and lowland.

Putting the roof of the first-class stone straps, filling the joints from the top and bottom with a stone arc with cement spices in the ratio 1: 4

Pour the vines in a small piece of concrete brick or stone in cement masala 1:4, strip over the roof and supply. With brick pieces

Cement plaster is mixed with cement-gravel in the ratio of 1:4 on the wall and crushing the joints and regularly for 14 days. 25 mm thick

The function of color whitening is done in 3 layers so that there is a similar aura (to give even shade) on the new work / old work.

Providing and fixing double flanged ISI marked GI pipes medium duty(classB) Steel tube as per IS:1239 or amended upto date and zinc coating as per IS4736 with GI fittings excluding valves as vertical pipes.

Construction of Pump house of brick/ stone masonry of required size suitable for installation of maximum 4no. Mono block pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect including electrical works for lighting and fans, rain water drainage. The plinth area of pump house shall be area of measurement.

Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS9079, 2 pole motor operating at synchronised speed of 3000 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415V±10%, 3 Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation/ crosschannels/ 12.5 HP

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in positionat all level/ depths intr enches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line

Supply and fixing man hole cover and ventilation

Supply and fixing Rubber ring, nut bolt, etc

Contengency and material testing

Three time Photo and Display board Lumpsump

Please Enable Macros to View BoQ information